Counting matching models…
The original Creality K1 series camera is widely known for its unreliability and mediocre video quality. This model is a remix of the AngryCam camera mount that allows to install a much better third party camera, either IMX179 or OV5640,…
This model allows an IMX179 USB camera module to be used as a web camera, by mounting it to the top of your monitor. This module has an extremely good image quality for a low price - a comparable factory-made webcam would cost at least 5x…
This is case for Waveshare Sony IMX179 8MPx camera which is 38x38mm. For back case use 3mm threaded inserts and use 10-13mm M3 screws. I printed without supports, but inner part is ugly then, so I recommend supports on.
Waveshare camera 8MPx IMX179 cover. Printed in PETG, that camera chip is hot on the backside. Photos are from mine PRUSA MINI… I did this years ago, and do not exactly remember which model/author I take inspiration from (Thingiverse). I…
Lightburn Mount for IMX179 AliExpress Camera It's a camera mount for 2020 Alumunum Profiles. The camera can be mounted on the V-Slot and will require 8 M3x5 screws, no nuts. The print was designed for PETG but it can be also made with any…
I wish to add camera for my Atomstack laser to use it with LightBurn software. But I wish to remove camera when it is not needed. I used SONY DSJ-3079-HE also sold like 8MB IMX179 from here: https://s.click.aliexpress.com/e/_oENAtbv…
The Waveshare IMX179 8MP USB Camera (B) module is prone to significant overheating, which becomes even more critical inside an enclosed printer chamber. To prevent thermal throttling or damage, I implemented this simple cooling upgrade. I…
You can use it to mount IMX179 8MP USB Camera (B) module to a board and adjust it horizontally. It is especially useful for mounting a camera for your printer when the printer is enclosed in a wardrobe. In order to maximize devices…
The camera is very compact and is sold without a case. To be used in a 3D printer a protective case and mounting system are required. I designed a case where the camera stick is attached with two 4mm M2 screws using hot inserts. The stick…
This model is a remix (thank you to https://grabcad.com/lehaiver-1) . I adapted it to suit the 8 MP camera purchased on Aliexpress ( https://a.aliexpress.com/_EI7BHP3 ) of 38x38mm. The legs of this bracket are assembled with screws and…
Camera mount for SONY IMX179 USB 8MP with 2.1mm lens http://s.click.aliexpress.com/e/6HCBgNw (32mmx32mm) Print file "cameraplaat.stl" twice, one for in the camera and the other to mount on the wanted surface. You can connect the plates…
Modified versions of the front and back covers of chri.kai.in's Angry CAM USB v2 for use with the IMX179 USB8MP05AF camera module.
