107 models
This is just a simple Allen Key Holder that you can mount on the top of your Prusa Printer to have them ready at all times. There are four Versions available. One for a tighter Fit of the Hex-Mount and one for a loose one. I recommend the…
Simple 2 piece holder for hex key set, specifically made for Wera set but probably can be used with many others. This design works with 2 hooks, which is easy to install and remove, but holds very well thanks to the small bumps on the…
For standard inbus metric size set 1.5, 2, 2.5, 3, 4, 5, 6. NEW: Added tighter fit INBUS and new TORX version. Printing information I aimed for tighter key fit, worked for me with 0.4mm nozzle and 0.15-0.2mm layerheight. Added secondary…
A compact storage box designed to hold Allen keys ranging from 1.5 mm up to 6 mm, with a maximum key length of about 85 mm. Its integrated lid features a secure locking mechanism that keeps keys firmly in place, preventing accidental…
Designed the fitting with the inbus hex keys i own. so i added the step file as well so you can configure the holes if the fitting is to loose or to tight. PLA/PETG/ABS/ASA infill 15% no Supports
Ein Wand und ein Stehhalter für den Parkside Torx Steckschlüsselsatz. Den Stehhalter habe ich nicht gedruckt, weil mir der Wandhalter reicht. Wäre schön, wenn jemand den nach dem Druck hier postet. Nach Anregung eines Druckkollegen habe…
T-Handle Stand for INBUS Hex Keys (70129) and Torx Keys (74124) Orientation of the part see below! Settings: 0.20mm Standard NO support needed PLA / PETG
Holder for a set of hex keys. including hex holes and screw holes to test the size. The top plane is angled so that the keys always turned to the front.
French Cleat Inbusschlüssel Halterung | Allenkey holder
Adapterplatte Skadis Board Halter für das Inbusset von Wera
I printed this on Ender 3 v2, 0,12mm layer height, 50% infill
Pegboard mount for hex keys, designed so they are all easily accessible. Use two Spax 4x12mm panhead screws (or other wood screws with panhead) in the back for mounting.
Quick holder for 10 metric allen keys (2 | 2,5 | 3 | 4 | 4,5 | 5 | 5,5 | 6 | 8 | 10) prints without support on its side takes ~2,5h on mk4 with inputshaping *reworked the model on my pictures to give a bit more room (made it wider)
I wanted an organization for my Inbus T-Series (T-Griff) screwdrivers that could stand on top of a table as well as hang on a french cleat wall. I designed the stand so it could take all 8 screwdrivers, but still be printable on a small…
This model is made to fit in to your gridfinity collection. I printed this one on my MK4, but it doesn't fit in one piece, So you'll need some hard loving to fit them together. These fit perfectly together all in all, but the cleaning of…
I designed this mount especially for this inbus set: https://www.pbswisstools.com/de/werkzeuge/quality-hand-tools/winkelschraubenzieher/produkt/pb-212lh-5-rb/ It's designed to mount on a peg board with 15mm spacing. I used M3 brass…
Stand für Innensechskantschlüssel mit T-Griff der Größen 2mm, 2,5mm, 3mm, 4mm, 5mm, 6mm, 8mm und 10mm. Druck: Halter und Füsse mit 0,3mm Layer Höhe. Schild mit 0,1mm Layer Höhe, Filamentwechsel für 2farb-Druck bei 4,1mm. Benötigt: 4…
This is a simple grip for a 4 mm allen key. Additional parts: Two M3 threaded insterts Two M3 x 8 mm screws The ring must be glued in.
I got tired of the constantly scuffed fingers or dropped inbus wrench, so I designed my own slightly overengeneered model of the inbus wrench handle (allankey). The primary goal was to make the handle grip well and also offer reasonable…
2fach Halterungen für Inbus-Schlüssel Sets von PB SwissTools ( Sechskant-Winkelstiftschlüssel oder Winkelschraubenzieher ) 2 Versionen: B73 - 2x Inbus-Schlüssel Sets - 1.5-10mm - 2x Inbus-Schlüssel Sets - 1.5-10mm + 1x 0.71 - 2mm (…
Allen Key Handle - Inbusschlüssel I scale the Models so they fit exactly to the Allen Keys Printer : Artillery Sidewinder X2 layer height : 0,2 line width : 0,4 infill 15% ; print time ~ 6 h Prusa PLA Orange MakerWorld :…
This hex key holder was made for the hex keys that come with the Ender 3 V2. It helps to keep your tools organized and still fits in the narrow compartment of the default drawer of the printer. I designed this hex key holder myself, but…
Ein Haltegriff oder Gerätegriff zum anschrauben für M4 Inbusschrauben.
Ein einfacher Halter für Innensechskant-Schlüssel in den größen 10 - 8 - 6- 5 - 4 - 3 - 2,5 - 2 - 1,5 mm
A tool holder for the includes sizes of hex keyt that clips to the top of a Sovol SV06. Prints “upside down” with no support.
This is a very simple Gridfinity holder for allen keys with a grip. Sizes: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm Length: 100 mm from tip to base of the grip, overall length should be around 150 mm Shorter keys could interfere with the base,…
I have modified the beautiful Inbus Flow holder so that it can be mounted on Ikea Skadis. For easy mounting, I used the great T-Clip system from @LineArcLine https://www.printables.com/model/256896-skadis-t-clip-system
Inbus-Set für die Skadis-Wand von IKEA Ich freue mich, euch mein selbst erstelltes Remix des PB Swiss Tools Inbus-Sets vorstellen zu können! Nachdem ich das originale Set in die Hände bekommen habe, stellte ich fest, dass es nicht optimal…
Der Halter funktioniert für alle möglichen “China-Werkzeugwände” mit einem Abstand von 45 mm zwischen den Langlöchern. Er nimmt die Größen 1,5 - 14 mm auf. Siehe Fotos. Ich habe die Freecad-Datei hinzugefügt, sodass ihr leicht selbst…
Parameterized Allen Key (Inbus) Holder with round holes (originaly it has hexagonal holes). https://www.printables.com/cs/model/287438-parameterized-allen-key-holder I made a model for Prusa Mini+ Allen key (Inbus) and torx set. This…
Gridfinity Knipex 7002140 side cutter Seitenschneider. 2x4 grids. Check my other Gridfinity tools https://www.printables.com/@MatthiasHart_2387670
Ich habe mir diese Schraubendreher gekauft: https://www.amazon.de/UEETEK-Schraubendreher-Sechskant-Werkzeug-Hubschrauber/dp/B01FSA79OG/ref=sr_1_34?keywords=UEETEK&qid=1644828198&sr=8-34 Bisher lagen sie immer auf dem Tisch, jetzt wollte…
Recommended print settings PETG Nozzle: 0.4 Layers: 0,10 - 0.15 Infill: between 100% Perimeters: 3 Bottom/Top Layers: 5 SUPPORTS NOT NEEDED Like the design? Please leave a “like” …. ❤ ….. Feel free to follow me …. ✅ ….. I am glad about…
PB Swiss Tools inbus set mount with Element System pegs
[EN] Turn your regular Hex key / Allen key into a "multi-key" This adapter allows you to use an Hex key / Allen key and any standard 1/4" Hex Bit. This adapter is the "sister" of the adapter for 1/4" socket wrench. You can find here:…
For good storage of the Allen key set, a wall mounting. Loosely inserted roll guards prevent the wrench from rolling away from the edge of the table. ------------------------------------------------------------------------ Für eine gute…
!! Neue Version mit Nummerierung und schöner abgerundeten Ecken !! Endkappe Inbus Schraubendreher mit Sechskant, damit rollt er nicht immer von der Arbeitsplatte. Material: TPU 95A Wenn dir mein Modell gefällt, würde ich mich über ein…
Für Inbus 6 - 5 - 4 - 3 - 2,5 - 2 - 1,5 - 1
Simple mount for Allan key (inbus) set Fortum to Parkside pegboard. Easy print, no supports needed. PETG and 3 perimeters recommended. Attach with two M5x8 screws from behind.
I designed this to have my Allen Key screwdrivers in good order. Not to loose them and store them in order. More text I don't want to add because the thing is self explaining, and Thingiverse spoiled my first upload with another software…
Schubladen-Einsatz für Inbus-Stecknüsse 3/8" und 1/2" von Stahlwille und WERA Als Ergänzung für die Stahlwille “Schaumstoffeinlagen TCS” (Tool Control System) Für Sechskant-Stifteinsatz / Innensechskant / Inhex => Version für 6kt…
Allen Key Holder for Küpper Board, 45mm Spacing
6fach Halterungen für Inbus-Schlüssel Sets von PB SwissTools ( Sechskant-Winkelstiftschlüssel oder Winkelschraubenzieher ) 2 Versionen: B147 - 6x Inbus-Schlüssel Sets - 1.5-10mm - 6x Inbus-Schlüssel Sets - 1.5-10mm + 1x 0.71 - 2mm (…
Halterung für Inbus - Schraubenzieher von PB Mit 3 Griff-Typen kompatibel: Classic, Multicraft und SwissGrip Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" -…
Gridfinity tray for the INBUS® Flow 73424 screwdriver. Sits a bit tight, but works for me. Also lost the CAD model and I'm to lazy to re-design it.
ozdobný falešný inbus Tesla Condor
Jedná se o skládaci organizér na inbusové klíče metrické a palcové. Metrické 1,3mm-10mm.(1,3; 1,5; 2; 2,5; 3; 3,5; 4; 5; 5,5; 6; 7; 8; 10;) Palcové 1/20"-3/8". (1/20; 1/16; 5/64; 3/32; 7/64; 1/8; 5/32; 3/16; 7/32; 1/4; 5/16; 3/8;) Sestava…
Spare-Button for the Twinbusch lifting platform. We own the TW236PE, which has white buttons. At the first day, they went black from the dirt and they were not so easy to clean. So I have decided to make new ones in black..... much…
Spezial-Halterung: 3+4mm Inbus, Bithalter, Proxon für PB + Proxon Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 - Grundplatte - 2 2. Skadis => 2x…
I changed the design of TJDesign's “Wera 30” mount to fit the INBUS Flow 73424 screwdriver. The hook is unchanged from the remix of septillion's remix, because i liked it more than the original.
Ich benutze ihn für TX Plus 25, 20, 15, 10, 9, 8 Schlüssel
Aufsteckbarer Inbusschlüssel Halter für 3 / 4 / 5 / 6 mm Inbusschlüssel zum aufstecken auf normale 90° Inbusschlüssel. Wenn andere größe benötigt wird dann würde ich den 3D Druck einfach Skalieren!
[EN] Turn your regular Hex key / Allen key into a "multi-key" This adapter allows you to use an Hex key / Allen key and any standard 1/4" socket wrench. This adapter is the "brother" of the adapter for 1/4" Hex Bit. You can find here:…
EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…
Instructions: Print two pieces of the model. Attach good quality double sided tape to the back of the two pieces. Clip the pieces onto the hex key set, remove tape and stick on wall. Now remove the hex set from the wall mount. To improve…
Holder for inbus, torx, drill, bit which does not slip out. Also with texts/sizes on it. You can customize it in OpenSCAD. Can be printed in vase mode (recommended). If the shape is not good, increase layer time in slicer. I had to set it…
Gridfinitybox für ein Proxxon Inbusset
This is a Toolplate for Bambulab Printers. It can hold Inbus 1,5 - 2 - 2,5mm Printed with four 10x2 Magnets to stick hold on the backplate of the printer and hold the Tools. Pause at Layer 14 to insert the Magnets or use the Bambu Studio…
Aufbewahrungsbox für INBUS® 73660 Schoneinsätze mit Größenangabe. Ich habe die Box in PETG gedruckt, da ich sie im Auto aufbewahren möchte. Storage box for INBUS® 73660 protective inserts with size specification. I printed the box in PETG…
Warning — I got a print issue with the tiny hooks which are attended to provide more grip, see picture. The stabilization structure was likely just too thin, and the stabilization structure became unstable during the print. Because it…
This model is a simple wall mount for the INBUS® 70273 inbus key set. It is designed as a tight fit with no wiggle but still easily slides in and out. Both pins have the same length despite the set being thinner on the right side so you…
Schubladeneinsatz - Breite 72mm - Länge 192mm - Inbus-Schlüssel - kurz - Knipex Zangen 2 - Versionen: V1 - 3x - Inbus-Schlüssel - kurz - bis 184mm Bsp: PB - SwissTools: PB 210 + 212 H / PB 2212 H / PB 410 H - 3x - Zangen bis 184mm Bsp:…
Schubladeneinsatz - Breite 72mm - Länge 258mm - Inbus-Schlüssel - lang - Knipex Zangen 3x - Inbus-Schlüssel - lang Bsp: PB - SwissTools: PB 211 H / PB 212 LH / PB 2222 LH / PB 411 BH 3x - Zangen bis 250mm Bsp: Kinpex: Cobra / Cobra ES /…
A small holder for inbus keys up to 6 size for holewall. Don't know who may want this since I made it for my specific need of holding a lot of smaller keys, but there you go.
Bit-Halter für 100mm Inbusbits mit Griff bis M6 Griffstücke bei Thingiverse https://www.thingiverse.com/thing:5012924/files
Both are my one design, but designating them as a Remix makes them easier to find. Also I copied some measurements from the original. Selection Ring: It annoyed me, that you can not change the direction with one hand. With the ring you…
Schraubenzieher-Einlage für LISTA-Werkzeugwagen Dimension: 450 x 160 x 15/30 PB Swiss Tools: Inbus Gerade 4mm - 6kt - 205L/4 3mm - 6kt - 205L/3 6mm - 6kt - 205/6 5mm - 6kt - 205/5 4mm - 6kt - 205/4 3mm - 6kt - 205/3 2.5mm- 6kt - 205/2.5…
Aufbewahrungsbox für INBUS® 73660 Schoneinsätze mit Größenangabe. Ich habe die Box in PETG gedruckt, da ich sie im Auto aufbewahren möchte. Storage box for INBUS® 73660 protective inserts with size specification. I printed the box in PETG…
6fach Halterungen für Inbus-Schlüssel Sets von PB SwissTools ( Sechskant-Winkelstiftschlüssel oder Winkelschraubenzieher ) 2 Versionen: B147 - 6x Inbus-Schlüssel Sets - 1.5-10mm - 6x Inbus-Schlüssel Sets - 1.5-10mm + 1x 0.71 - 2mm (…
Halterung für Inbus - Schraubenzieher von PB Mit 3 Griff-Typen kompatibel: Classic, Multicraft und SwissGrip Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" -…
Spezial-Halterung: 3+4mm Inbus, Bithalter, Proxon für PB + Proxon Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 - Grundplatte - 2 2. Skadis => 2x…
Holder for inbus, torx, drill, bit which does not slip out. Also with texts/sizes on it. You can customize it in OpenSCAD. Can be printed in vase mode (recommended). If the shape is not good, increase layer time in slicer. I had to set it…
A yet another inbus (hex key) holder. This is minimalistic and some parameters can be adjusted. The holes are intentionally round for easy manipulation with the keys.
Multiboard compatible toolholder for “INBUS® 70167 Hex Key Set (Metric) 9pcs” I'm using the standard Multiboard Snaps
For this skadis inbus holder I used a 20x20x10mm magnet which can hold ~15kg, this seems to be a good sweetspot for the weight of the inbus set, altough the magnet could be a bit weaker i guess.
I have constructed a tool holder that is attached to an Ikea Skadis. The clip linked below is required. Ich habe einen Werkzeug Halter konstruiert, der an einen Ikea Skadis befestigt ist. benötigt wird der unten verlinkte Clip. 2 ; 2,5 ;…
A Gridfinity storage for the Inbus Flow 73424 Rachet Screwdriver made using GridfinityGenerator and further customized using fusion360. I have uploaded 2 versions of the boxes: a simple one and another with extra bits storage and side…
Print in place, no supports needed. Color the print with a multicolor printer, or print it in a light color and use a permanent marker as shown in the picture. This organizer can stand on your work bench as well as hang on your…
Přehledný držák na inbusy s označením velikosti. Materiál PLA Tryska 0,4mm Vrstva 0,2mm Výplň 20%
Bei den Haken sollte man für maximalen Support sorgen, weil diese leider ansonsten während des Drucks leicht abbrechen.
T-Griff für drei der wichtigsten Inbus-Schlüssel: M3, M4 und M5. Der Inbus-Schlüssel für M3 hat eine Dicke von 2,5mm, der M4 hat 3mm und der M5 hat 4mm. Material: 2x M3x16 Innensechskantschraube, 2x M3 Mutter und den entsprechenden…
Ich habe einen simplen Halter gebastelt, damit die Schraubendreher nicht überall hin rollen. I made a simple holder to keep the screwdrivers from rolling everywhere. Gemacht wurde der Halter für die folgenden Inbusdreher:…
Allen Key Inbus Wall Mount for plastic tool wall. Easy to remove the whole tool holder. Printed in PLA 20% infil without full top or bottom layers
I used the STEP-file from Taer.Holmes to change four items: Reduction of overall size (minimalistic) Reduction of hole size for tight fit Inclusion of flat site in each hole for defining orientation Change the numbers from extrusion to…
Englisch: Hex key holder for the Skadis wall. Deutsch: Habe einen Halter für die Skadis Wand gemacht, wo meine Innensechskant- und Torxschlüssel Sets gut reinpassen.
