Counting matching models…
Lots of fun with a bubble straw that produces a ton of bubbles for the kids. Use: Make sure the tip of the straw is submerged in the bubble solution for best performance. See the photo with the red line. I've included the .3MF that uses…
This model is one from my extensive Children's Toys Collection . The large round marble maze is a fun handheld fidget toy and a small challenge for patient fingers. The goal is simple: guide a marble through the maze until it reaches the…
ATTENTION: PRINT THIS TEMPLATE UPSIDE DOWN FOR BETTER RESULTS MY PRINT SETTING: -Nozzle 0,40mm -Layer 0,08mm -Infill 5% -Support auto tree
When I thought of the Incredible Hulk, the first thing that came to mind was HULK SMASH! Smashing his fists down really captures the look I was going for but try not to smash your cup down on the coaster! Part of my Marvel's Avengers…
Personally, this is my favorite spinning balancing bird model as it looks clean and is easy to print. Print upright with supports (raft/brim recommended) . Birdwithcavity STL file allows you to hot glue a counterweight like a coin into…
Elastic Girl! Tuto kočku z animáků jsem vytvořil podle jednoho obrázku , takže nevím jestli přesně odpovídá originálu(na pohádky jsem už starý :) ). Chtěl sem ji udělat aby šla tisknout bez podpory , ale ta děvčica má krásné štíhlé nohy…
Cute Incredible Hulk Figurine
my take on the incredibels robot. the version you see in the pictures is a bit changed, i decreast the feel size to get better proportions. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Notes: on the body…
Need a flawless 3d print of this? Visit https://muckychris.com/collections/buddhas introducing the Original Muckychris 3D Printed Pop-Culture Buddha Statue: A Fusion of Art, Technology, and Nostalgia. Celebrating more than 15 years of the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Just an Incredible Mask! I printed it flat in flex and looks great. You can also print it in PLA and it can be molded with hot water or a hair drier to make it more ergonomic. 2 models, one with holes on the sides and another one solid.…
Need a flawless 3d print of this? Visit https://muckychris.com/collections/buddhas introducing the Original Muckychris 3D Printed Pop-Culture Buddha Statue: A Fusion of Art, Technology, and Nostalgia. Celebrating more than 15 years of the…
I tried to create my project of a rather popular model. Here is the result...
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a set of pieces that can be used to recreate the Incredible Hulk figure at 500% scale. This figure was released in 2012 as part of the Hulk polybag set. All of the stl files needed to create this have been included in the "stl…
An MMU or Palette Incredibles logo. Designed for the MMU or the Palette, it is not able to be printed in multiple parts then be glued together. Please post makes and remixes as it really inspires me to do more cool things.
Update: 2/17/2022: The interface between the lid and the seal is not very good currently. I am working on a better design. The challenge is around the TPU filament that I am using. It is 98A which is not very soft but is easier to print…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
If you download the model, please don't forget to leave a like. Thank you! <3 Feel the raw power of the Incredible Hulk with this low poly geometric 3D print, capturing the mighty hero in a roaring pose. This design showcases his immense…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
For this look start with White then switch to Green . Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Made this sculpt for the fun of it and decided to print it. If this gets enough attention I'd make the second part of the meme! I printed it with organic supports at 0.2mm layer height.
These are Syndrome's Gauntlets from The Incredibles movie. I showcased them in my build video on YT. Both gauntlets can be printed in pretty much any filament you would like. I used a white PLA in the video. In order to actually wear…
This is The Incredible Magnetic Cocoa Pod! The realistic exterior is perfect to use as home decor but thats not all, there is a hidden compartent on the inside and a removable base so you can use it for storage without the fear of it…
Disney Infinity Mr. Incredible
Unleash your inner superhero fan with this stunning 3D printable STL figurine that captures every elegant detail of your favorite invisible force! This beautifully crafted statue showcases the iconic character in her sleek dress pose,…
This is quite simply a math joke. I've seen the joke in a few places, including The Simpsons. I'm not sure who originated this joke, but it's fairly tame and I think it's easy enough to figure out. It might make a good gift for a math…
A Wall Art dedicated to Robert “Bob” Parr, alias M. Incredible from The Incredibles. I used a children's coloring to create that model.
💙 Enjoying the Freebies? I love bringing these concepts to life and sharing them with you. If you'd like to support the channel or sell physical prints of my designs, check out the links below: 🔓 Commercial License: […
5 Color HueForge model. 'Incredible Hulk Clock' filament painting made using Bambu filaments. if you are not familiar with printing at really fine layers such as 0.04 you will need to lower the print speed on printers like the bambu Print…
Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: Patreon Portfolio at https://marjers.com/ Tools I use: Acrylic paint pens for painted models, blade cutters for…
It's time to save the world... or at least your desk! 🦸♂ Bring the incredible strength of Disney Pixar's Mr. Incredible (Bob Parr) to life with this dynamic 3D printable figure. Captured in his classic red supersuit, this model is a…
Easy to print with filament changes at each top surface. The top layer of the main letter is 0.8mm before the text outline. Main text is changed after the top of the base layer. .gcode with pauses is attached. I added ½" black magnet tape…
I was requested to make this for a kid's birthday Party. I thought this would be a good file to test your manual filament changing skills with so I am sharing with everyone. Use manual filament changes to print this in 4 colors. You need…
This will print on a1 mini 180mm plates. Split up to make an 8.4-inch x 12 print once all prints are completed. AMS enabled but can be done without using pauses. Start with Black Layer 5 switch to Green Layer 9 switch to white until…
Bring superhero excitement to your workspace with this stunning 3D printable figurine that captures every heroic detail in perfect STL format! This dynamic statue showcases incredible muscle definition and powerful stance, making it an…
An Incredible Hulk Light this is an MMS model.
i created this model using the incredible tool meshy.
This is a re-imagined model of the Incredible Hulk.
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
SUMMARY Inspired by the 1970's movie of the same name this is scaled down mask to be stuck to your fridge. I intend the Fridge Magnets to be free always but eventually I will start charging for the masks so if you want this item's bigger…
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
My nephew's favorite toy is this toy car from the Incredibles 2 movie. Only problem is that it only came with two darts. One is lost and the other is in bad shape as you can see in the photo. I drew these darts up and printed off a bunch…
Model created by AI. This is a character from the Incredibles story. Created for hand painting 0,2 layer, tree support
Be amazed with the incredible architecture of this extremely complex model, The Incredible Cube tells a thrilling story that you wont want to miss.
Another model created with the help of AI. I hope you like it! I was considering whether to publish this one, because most AI-generated models are not very suitable for 3D printing. However, I have to say that this one printed…
Instead of showing many trinkets on a single shelf, why not show each trinket on their own dedicate spherical shelf? This shelf is simple, but striking. Can also serve as a stylish award/trophy base if you dare to be different. Feel free…
Ever happened to you that your asshole friends asked for a ziggy? use this to save 2 cigs for yourself. !! This is a prototype !!
The Tokens in the Incredibles 2 Junior Monopoly Game are just mixed when stored in the box, so i made this holder. Printed in 3D Jake White PETG, but should also be printable in PLA.
Multi part Incredibles logo designed to click together. Perfect for multi colored prints without an AMS system. Remix of an existing model, perfect for an easy cosplay. Needed some extra tweaking because of my printers tolerances.
Printed in PLA at 0.2mm layer height. COB LED Light stip is self adhesive: Aclorol USB COB LED Strip Light 1M Dimmable LED TV Backlight High Density Cold White Flexible Rope Light with 1.5M USB Powered for Under Cabinet Wardrobe Bed…
This is a set of pieces that can be used to recreate the Incredible Hulk figure at 500% scale. This figure was released in 2012 as part of the Hulk polybag set. All of the stl files needed to create this have been included in the "stl…
Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: Patreon Portfolio at https://marjers.com/ Tools I use: Acrylic paint pens for painted models, blade cutters for…
The Incredible Hulk - Raging Against Abomination - 2008 3D printable model.
Printable wearable mask based on the Pixar movie Incredibles II
The Incredible Hulk - Bruce Banner (Bill Bixby) & The Hulk (Lou Ferrigno) - 1978-1982 3D printable model.
Superheroes - The Incredible Hulk Standing (Comics) 3D printable model.
Ready for 3d Printing. If you like my models please consider supporting me on Cults3D : https://cults3d.com/en/users/zolazolo/3d-models OR Patreon: https://www.patreon.com/NSFW_18
