33,910 models
This large ornament or tabletop decoration (~5" diameter) uses a standard tealight LED candle (38mm diameter) to light it from within. If you have a tealight of a different size, I would scale the model to adjust to it's diameter. Print…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
V2 ( screw mount ) https://www.printables.com/model/1160799-universal-cable-holder-v2 Tested with Petg
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Filament clip works on many spool brands including Prusament, Amazon Basics, Overature, Hatchbox, AMZ3D and others. Very simple design. Version 2+ , added March 15, 2024 incorporates slightly smaller filament clasps and reverses the two…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Tested with Petg V2: Added a wider base for extra holes and a better tape adhesion
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
As of February 14, 2025, the 3DBenchy model has been released into the public domain. For more details, please visit the link below: https://www.3dbenchy.com/3dbenchy-sets-sail-into-the-public-domain/ #3DBenchy is a 3D model designed by…
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
A very nice F1 logo for your desk or shelf. The logo and its stand are designed separately, so you can print it in 2 colors. The parts are snap-on in order not to have any problems with alignment. But my advice is to glue the pieces…
Print approx. €2.15–€2.62 excl. taxPreliminary estimate for one variant
A set of leaf coasters and decorative holders. These coasters will catch the condensation from your glass and you can use it to water your plants! Nothing quite like free water, right? When you're done with the coaster, plug it back into…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for one variant
Larger sizes: https://www.printables.com/model/1200632-universal-bag-clips-xl
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
This Garden Tool Hook is designed to neatly hang garden tools such as brooms, spades, and rakes in your shed or garage. It is made to fit tool handles with a diameter of up to 35 mm , making it suitable for most standard broomsticks and…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
Tested in PETG
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
tested with 0.2 layer hight, works great! #UPDATE 16.08.2022 Added Gcode for MK3S+ with Arachne Perimeter Generator
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
Henry - commonly called Hal by his friends and locals of Skalitz, or occasionally Henry of Skalitz - is the main protagonist of our game Kingdom Come: Deliverance . We prepared a 3D printable version of Henry's figure. It's available both…
Print approx. €6.14–€7.50 excl. taxPreliminary estimate for one variant
Filament load/unload issues? MMU2 taking too much space? Not with this Universal Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to four full revolutions. The AMF files of the buildplates are included. The…
Print approx. €10.28–€12.56 excl. taxPreliminary estimate for one variant
After my Simple Universal Phone Stand that got featured I got a new phone. So I made a phone holder version 2 for bigger phones and other improvements. You can print it on the side as shown in the picture. NOTE: If your phone is to big…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
Filament load/unload issues? MMU2 taking too much space? Not with this Universal Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to four full revolutions. The STL and AMF files are available for download on…
Print approx. €8.05–€9.84 excl. taxPreliminary estimate for one variant
Würth keychain screwdriver Introducing the Würth keychain screwdriver - Your Go-To Tool on the Go! Are you tired of fumbling around for a screwdriver when you need it most? Say goodbye to the hassle of searching for the right tool with…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
! After printing, remove the small supports on the hinge ! please use my gcode files for printing :)
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant
These are the housing files for the (tr)uSDX Radio. Print in PETG / 0,15mm Layer Height / 20-25% Infill Tap (cut M3 Threads) into upper/lower Wall before putting inScrews. UPDATE - 11 July 2022: Added new Bottom Cover for Slide On Battery…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
Found with a heavy plate that I wanted to display that the original felt like the balance was off and could easily fall over when bumped. I have copied the summary from DanRom624 (original from Thingiverse:…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for PETGSource material: PET
Festool Abrasive holder with positioning aid - simplify your tool management Where do you currently store your abrasives? Print your own Festool abrasive holder with positioning aid and make your everyday work easier and more productive.…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
Keep your cleaning supplies organized with this practical spray bottle holder. Perfect for storage rooms, cleaning cabinets, garden sheds, or workshops. Designed for easy wall mounting using two M6 screws, this holder secures most…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
The original finecoar Grind Setting Dial V2.0 for all new Eureka Mignon grinders Now also compatible with all* new Eureka Mignon models! For more information, please continue reading under Compatibility. If you'd like to buy a finished…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Universal Ball Joint. Inspired and modified according to Universal Ball Joint model by DieZopfe (https://www.thingiverse.com/thing:5020323) Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Filament: C-TECH…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
Decorative Gothic Dragon Door Knocker ** THIS IS NOT FUNCTIONAL ** no moving door knocking mechanism. it just looks like it.
Print approx. €7.44–€9.09 excl. taxPreliminary estimate for one variant
Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Overview This is a fully adjustable phone mount using a ball and socket joint compatible with any type of filament requiring minimal support material aimed to be printed with any FDM 3D printer. This mount is designed to be compatible…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Support m e & Buy a T-shirt This is the second version of the can press allows to easily compress used cans so they take up as little space as possible. It's universal for all sizes of cans. T-shirt Support m e & Buy a T-shirt
Print approx. €13.97–€17.07 excl. taxPreliminary estimate for PETGSource material: PET
Overview My Subaru was missing a few body panel retaining clips and I had the bright idea: why not print my own. After doing some searching for existing models, I found a few but wasn't entirely happy with the couple options I test…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
Foxy from Five Nights at Freddys.
Print approx. €9.80–€11.98 excl. taxPreliminary estimate for one variant
Universal Closing Clip for bags and packaging , suitable for closing ground coffee, powdered cream, cappuccino. There are more pocket clips on this page, you can try mine to see if it's right for you! I used the joint from a proven cable…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Skadis Cable Holder, perfect for chargers and other :)
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Eine einfache und sehr schnelle universelle Schnellspannvorrichtung für die Wand oder einer anderen Fläche. Diese kann an der Wand und an einem Gegenstand geschraubt oder auch mit einem doppelseitigem Klebeband verwendet werden. Die…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
This is a holder for the extra bits that can be ordered for the LTT screwdriver. 12, 24, 36, 48 and 60 bit versions. The outer case is a single print with a print in place hinge. The inner bit holder part is meant to be print with…
Print approx. €5.87–€7.18 excl. taxPreliminary estimate for one variant
I wanted to use the original model , by herbert , on my electronics bench, but it does not have a pegboard, so I remixed it to mount with screws or double-sided tape. This model matches the Pegboard Screwdriver Holder (7mm honeycomb and…
Print approx. €3.52–€4.30 excl. taxPreliminary estimate for PETGSource material: PET
Universal pen adapter for the Cricut maker 3. Includes pen distance tool. works with anything up to the thickness of a sharpie. Pen distance tool rest/snaps on to the rail allowing you set a 3mm distance.
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
Galaxy Buds Case that snaps on. No glue or tape. It will fit Buds Pro, Buds Live, Buds2 and Buds2 pro, and Buds FE. I printed in PLA. 0.15mm QUALITY settings in Prusaslicer. Ironing for top layer only. Supports so it can be printed easily…
Print approx. €0.90–€1.09 excl. taxPreliminary estimate for one variant
I designed this universal bottle cap opener with a lever-based mechanism for easy opening of water bottle caps ranging from 27-35 mm in diameter . Use 3 perimeters + 30% infill. 🔹 Features: ✅ Ergonomic Lever Design: Uses a simple…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
BONG + ASH CATCHER
Print approx. €11.82–€14.45 excl. taxPreliminary estimate for one variant
I wanted to organise my IKEA ALEX drawers and I found this design by vwfan0178 , however, there was a lack of options, so, inspired by this design, I designed a couple more options. I also added a fillet to the bottom because I noticed…
Print approx. €2.27–€2.78 excl. taxPreliminary estimate for one variant
Features: Holds pens up to 14mm in diameter Doesn't damage your pencil's tip (see drawing below) Holds pens with extended mine (no need to close pen) Secure stand There are three versions available: 12mm 14mm 9mm (Apple Pencil version…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
Wanted to print a candy bowl, so I decided to go with a simple shape, and play around with the settings in PrusaSlicer to give it a cool and unique look! This print has no top or bottom layers, and no perimeters on the inside of the bowl…
Print approx. €17.31–€21.16 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
Remix of Folding tripod for Portable Phone. https://www.thingiverse.com/thing:2813597 Add mount for vertical and horizontal grip. For more information you can play this video: You may also liked some of these projects:…
Print approx. €9.42–€11.51 excl. taxPreliminary estimate for one variant
This is a set of different-sized touch screen pens for resistive touch screens. Uploaded right now are models with tips sizes 2mm, 3.5mm, and 5.5mm depending on your specific need. All designs are 110mm long and have a hole on the end for…
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for one variant
Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Drones are a perfect playground for lightweight yet robust designs, and Synthara takes full advantage of cutting-edge generative design techniques. This 3D-printed drone frame is engineered for FPV enthusiasts looking for a balance…
Print approx. €4.10–€5.01 excl. taxPreliminary estimate for PETGSource material: PET
Very useful, this key can be added to your keychain. So, no need to look for a coin anymore. Opens deposit locks without coins or tokens and can be removed immediately. Print settings: Default PETG 0.2mm, nozzle: 0.4mm
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
Customizable car / bike tire valve (Schrader) cap with thread. The thread starts from the middle so you don't need to make so many turns and it's easier to put on. There's an extra space for a tip. Print instructions Any filament works…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
We had mice show up in our house for the first time and my wife wasn't a fan of killing them. I first saw this 140+ year old mousetrap design on YouTube and then a make someone had done as a 3D print on that other site. I came up with my…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
Thank you for your interest in the Universal Enclosure Standard Build. All STLs for the Standard Build are below. We also have an additional set of Daisy-Chain and Accessory STLs available on our profile. To purchase the kit for this…
Print approx. €9.88–€12.07 excl. taxPreliminary estimate for one variant
Add a pen. Put the screws. Use the middle screw to lock/unlock the compass . You don't need to overtight the screw to lock the compass. A short pressure should be enough. 2 versions : Plastic point : 100% printed compass. Use a small file…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Provides long-term or transportation storage for four hard drives. Feet can be printed and inserted into the feet slots in the bottom to provide cushier surface contact and make the storage cages stackable. While I printed the feet in…
Print approx. €18.82–€23.00 excl. taxPreliminary estimate for one variant
To reduce the gap between the wall and my tablet frame, I created a specific Quad Lock universal wall mount with a height of 8.8mm.
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
The disk inside can rotate in 45° increments for maximum hanging options. This version is uses less material and is a little slimmer
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
Maximum HDD dimensions: Length 148 mm Width 102 mm Height 27 mm HDD is attached from bottom with a 95.25 mm by 44.45 mm screw pattern. Check if your hard drive fits and has this mounting pattern on bottom. Printing To assemble one case,…
Print approx. €8.06–€9.85 excl. taxPreliminary estimate for one variant
Holds tools all sizes :)
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
daffy duck looney toons
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Organise your pockets with a minimalist EDC bit driver/screwdriver Bit driver with internal storage for 6 standard 1/4" bits. Knurling for grip Option to add 5x2mm magnet to retain the driver bit in use UPDATED 9/2/21: Fixed thread…
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for one variant
Unlike most Vortex Passthrough models where the vortex part is inserted vertically. Here the Vortex Part is inserted diagonally through the corner, making it a more challenging print. After some prototyping and many failed prints i…
Print approx. €7.96–€9.73 excl. taxPreliminary estimate for one variant
Update: redesigned version available here: https://www.printables.com/model/607312-ziptag-v20 ----------------- Introducing ZipTag. Easy and quick to print (5-6min per piece) zip tie style tag. Useful for cables, bags and other items. I…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Check out QR Code Stand → here ← Dimensions: Scan This to Try Out --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Don't forget to hit the like button if this helps you :) A filament guide for the Ender 3 S1 gantry top rail, remixed to enlarge the hole through the eye of the swivel to be larger so its supports some PTFE tubing. OD 4mm is a nice snug…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
3D printed palm ratchet knob (stubby screw driver handle) Print-in-place : Just print, and you are all set. Assembly work is not necessary. Durable ratchet mechanism : Tapered ratchet gear makes it not only easy to print but also sturdy…
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for PETGSource material: PET
Wall decorative Bats Print them flat and you can bend the wings to give them a little depth stuck them to the wall using double sided adhesive dots for best results when printing them at different scales 100% Layer hight @ 0.28mm 75%…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Outdoor cover for the popular analog Capacitive Soil Moisture Sensor v2.0 (according to comments, this also fits version 1.2). No soldering changes are required. I just crimped a JST 2.54 mm female connector on the cable. The cable…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for PETGSource material: PET
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [ANNOUNCEMENT Oct 7, 2024] I just confirmed - the xRivet also fits the Original…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
BNSF diesel locomotive toy train (BRIO / IKEA compatible) You will need the following screws to put everything together. 14x ISO 14585 (DIN7981) 2.9mm x 13mm ( https://amzn.to/3WgKty1 ) 2x ISO 14585 (DIN7981) 2.9mm x 19mm (…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
Slight Update 13 Dec: Added wee hooks to the hanger to help stabilise. Christmas-Tree-Card-v3-Hooks.stl Slight Update 26 Nov: Added a second model without the 2021 Christmas Label. Just the ornament itself. Note: The two ‘ornaments’ for…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
Extrusion machine which allows plastic bottles (PET) to be recycled into printable filament for a 3D printer. I have made a guide in .pdf format, which summarizes all aspects of the machine with information.…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
A universal adapter to hold a Parkside PAP 20 A1 (Lidl) battery. You can add holes in Prusaslicer 2.4+ or in any other software to connect it to the machine. No supports needed. Feel free to tell me for improvements.
Print approx. €2.88–€3.53 excl. taxPreliminary estimate for PETGSource material: PET
Protective case designed specifically for the TP4056 charging circuit. Featuring a entry point for USB cable, a dedicated exit for power cables, and a secure pressure fit design. With this circuit things can get quite hot so i designed it…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Update 2023: Bought an MT8 and added a fitting for it here. --- You want to customize your Magura MT5/MT7/MT8/MT Trail Calipers without spending a fortune on those expensive plastic rings? Look no further, this model has you covered.…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Filament clip works on many spool brands including Prusament, Amazon Basics, Overature, Hatchbox, AMZ3D and others. Very simple design, and now dual sided to allow for even easier use. Version 2, added on May 4, 2021, incorporates a…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
I designed a very large knife block a while back because I have a lot of knives. It was not very popular and I understand why. Not everyone has an insane amount of knives, because not everyone copes with their depression by buying things.…
Print approx. €2.95–€3.60 excl. taxPreliminary estimate for one variant
Simple hanging clip
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
Here is my design of the board game "Le Passe Trappe" (also known as Flitzpuck). It's a fast and addictive game for two players. The print contains all required parts, the only extra hardware needed is a rubber band (I've used a hair…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
The model is designed to be printed without supports. However, at a 0.2 mm layer height, some bridging areas may not print as cleanly. The magnet-ready version is available as a 3MF file. The hole is modeled as a negative cylinder,…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
Key cover with customizable text that uses inserts to work with almost any key . Wall-mounted holder for 4 keys keeps all your keys together. Now includes INSERTs for Schlage (SC1, SC4, SC9), Kwikset (KW1), and Hudson keys as well as a “…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Fits any cable from USB-C or USB-A to VGA or RJ-45 Print it with 5-10% infill. No supports needed. Avalible 2 variants: For 4 cables For 6 cables (If You want a holder for a different number of cables just comment or send me a message and…
Print approx. €1.58–€1.94 excl. taxPreliminary estimate for one variant
Check the hight of your headphone before printing this! You want your stand be some cm higher then your headphones. Feel free to give me a tip if you like it! :)
Print approx. €31.20–€38.13 excl. taxPreliminary estimate for one variant
A very minor improvement to the screw mount remix of the honey comb screwdriver holder. This version Has fillets/chamfers around the outside edges to make it more pleasant to touch. The screw holes are slightly widened for M4 countersunk…
Print approx. €2.58–€3.16 excl. taxPreliminary estimate for PETGSource material: PET
A relatively compact way to store lots of flash drives and SD cards. The top holes are great for full sized flash drives, while the angled slots are perfect for small USB devices such as WiFi & Bluetooth adapters, game controller…
Print approx. €6.06–€7.40 excl. taxPreliminary estimate for one variant
His partner: https://www.printables.com/model/1473177-alternative-christmas-deer-doe Print Tips Material: AzureFilm - PLA Silk Gold Layerheight: 0.2mm Structural Support: No Infill: Grid
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for one variant
I couldn't find a yoyo model for a standard 608 ball bearing, that's why I created my own. I designed it with the specs of commercial unresponsive yoyos in mind: 55mm diameter 36-38mm width 54-60g weight Turned out that the yoyo can not…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
A protective case for Lenovo legion go tablet; All the protective cases available so far did not support controller separation, so I made my own. it also has slot for perpendicular USB-C adapter on top USB-C slot and kickstand. print with…
Print approx. €5.60–€6.84 excl. taxPreliminary estimate for one variant
So this is a thin and minimal protection case for Apple Watch Series 7 45mm. Prints in 14m and uses only 1,4g of material.
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
IMPORTANT NOTE: As user GamerGuy95 reported, this does not work in Cura. Theoretically, there could be some way to make it work, since Cura does allow for mesh modifiers; but in practice, I don't know. I haven't used Cura for ages, since…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Quick and easy-to-print mudguard, optimized to fit diagonally on your print bed. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
Remix of the Hive Game Derivative “Swarm” pieces available on Thingiverse. I changed the thickness of the bugs (7 mm) and the depth of the bug shape (1 mm). I also modeled the bugs without the piece, if you want to create/edit a model…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
Hi! Let me introduce the whole grid of 2023 Formula 1 World Championship! Now you can show the world who your favourite driver is 🏎 In the files section you will find: stl files with each driver keychain from the list: Red Bull: Max…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
This is a fully printed and adjustable portafilter distributor for my Sage Barista Express machine, which uses a 54mm portafilter. You need to print it in .1 or less to get the threads working correctly. Use the step file and seperate the…
Print approx. €7.80–€9.53 excl. taxPreliminary estimate for one variant
Check out my Amazon Page to see what kind of gear I use to make these models! This was designed to be used as a classroom exercise to teach students about 3D printing, math, and design all at once. Print out these blocks and assemble them…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
A mother and her three babies holding a blanket so that you can store your valuables. Scale and slice the stl file or use my pre-sliced g-code file! FRAGILE PRINT! Brim Recommended.
Print approx. €6.43–€7.86 excl. taxPreliminary estimate for one variant
3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel! Please ‘Like’ this project, it helps me and my future projects. Thank you.…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
A lockable pegboard rivet for 1/4" pegboard. This is based on similar designs I found on Thingiverse, but tweaked to my liking. Pegboard Push Rivets by Kenneth Stout Pegboard rivet by Jon Sanders I liked the general design of Kenneth…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Inspired by the 2.5" version: https://www.printables.com/de/model/212758-25-inch-hddssd-caddy-for-multiple-drives I designed a similar one for 3.5" drives.
Print approx. €3.65–€4.46 excl. taxPreliminary estimate for PETGSource material: PET
A starter for the urgent desires. So, com board is ready and was done with M3 heat inserts in mind. As there is currently no idea of where it would commonly fit this is not the final solution. I for my part will fit it into a gridfinity…
Print approx. €1.35–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
![Universal Parkside Battery Adapter [PAP 20 A1]](https://media.printables.com/media/prints/108918/images/1078299_f1a15a72-f130-43d8-867a-9151b1efc70e/img_20211230_150124.jpg)
