Counting matching models…
A 5x2 Gridfinity tray for the Iwiss SN-2549 crimping tool. Probably also fits: SN-28B SN-58B SN-025 SN-01BM as these seem to use the same chassis. Versions available: Half-height (3u) - the tool sits about 3mm proud of the top of the tray…
Crimping plier holder for IKEA SKADIS pegboards specifically tailored to fit the IWISS SN-2549 ratcheting crimping pliers. Two versions are included: Plier holder with three slots to hold spare/different crimping jaws. One of the slots is…
Gridfinity compliant, low-profile tray/holder for the IWISS/iCrimp HSC8 ferrule crimping tool. The one show in the picture is a knock-off brand but it has the same physical size as the original. Please note that some brands of HSC8 type…
Gridfinity bin for the IWISS HSC8 family crimping tools. Size is 5 x 2 units and 4 units high. IWISS makes crimping tools HSC8 6-4 HSC8 6-6 HSC8 16-4 HSC8 16-6 of the same form factor, they should all fit (not tested though). I included a…
Crimping plier holder for IKEA SKADIS or UPPSPEL pegboards specifically designed to fit the IWISS IWS-3220M ratcheting crimping pliers. I printed in Black PLA with 35% infill on a Bambu P1S, (tree) supports on, came out plenty strong. I…
Gridfinity bin for the IWISS SN-28B crimping tool. Size is 5 x 2 units and 4 units high. IWISS makes other crimping tools SN-01BM SN-025 SN-48B SN-58B SN-2546B SN-2549 of the same form factor, they should also fit (not tested though). I…
Gridfinity compliant, low-profile tray/holder for the IWISS IWS-2820M and the IWS-2412M open barrel terminal crimping tool. I did not completely design it from scratch. I used schenklooza 's excellent Gridfinity Parametric Blank bin as a…
This is a 2X5X3 bin to store the Iwiss IWS3220M molex crimper. The handles sit a bit proud of the upper edge so you won't be able to stack anything above them. I'm probably going to make a version that is 2 units thick to allow stacking.…
This was custom fit for IWISS SN-2549, but once lots of Crimping tools are similar, may fit another brands and models. It's a tight fit, so if your printer needs more hole tolerances, you can increase it in your slicer with a value from…
Created with the Fusion Gridfinity Generator plugin.
Ratcheting crimping plier + spare jaw (IWISS SN) holder for honeycomb storage wall (HWS)
This is a holder that allows you to hang your IWS-3220M crimp tool easily.
This is a stand for organizing the various jaws that come with the iWiss crimping tool linked below. https://a.co/d/eFWPzec
This is a printed adapter that make it a bit easier to use the IWISS 322M crimper on 1.5mm CLIK-Mate connectors. This crimper is ~$300 to $500 cheaper than the official crimp tool, putting these terminals within the reach of the hobbyist.…
Use the Skadis T-Nuts and some M2 screws for mounting You also need 1x 6x3 magnets and some glue
Redrew Garethky's helper and added two holes for JST XH 2.5. I only tested the middle hole :-) I'm not sure if this is the solution for everyone. The JST contacts are very fiddly and once the contact is inserted in the pliers, it works…
Use the Skadis T-Nuts and some M2 screws for mounting You also need 1x 6x3 magnets and some glue
IWS-2820/IWS-2412 holder for HoneycombStorageWall
Organizing my toolbox and testing out a new bit of software. I designed this with tooltrace. added a pause to swap out the colour for the top boarder. All my colour changing is done manually. https://www.tooltrace.ai/ I used PETG but PLA…
The IWISS HD-2612D and similar crimpers have a positioner that screws into the back to hold the contact at a specified depth during the crimp operation. This positioner makes the whole unit too thick to fit in most toolbox drawers.…
The existing holders for these crimpers all laid them flat, but I use them too often to banish them into drawers and desk space is too precious to waste like that. This also is more in keeping with Zack's original vision for Gridfinity.…
Organizing my toolbox and testing out a new bit of software. I designed this with tooltrace. added a pause to swap out the colour for the top boarder. All my colour changing is done manually. https://www.tooltrace.ai/ I used PETG but PLA…
Organizing my toolbox and testing out a new bit of software. I designed this with tooltrace. added a pause to swap out the colour for the top boarder. All my colour changing is done manually. https://www.tooltrace.ai/ I used PETG but PLA…
Remix to add a small lip to keep the tool more secure. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Category: Tool Holders & Boxes
Organizing my toolbox and testing out a new bit of software. I designed this with tooltrace. added a pause to swap out the colour for the top boarder. All my colour changing is done manually. https://www.tooltrace.ai/ I used PETG but PLA…
I made this to help organize my tool drawers. Fusion 360 file included. Printed in PLA with 0.4 nozzle, 0.2 layer height, and 15% infill. IWISS is a registered trademark of Iwiss Tools Co.,Ltd., which does not support or endorse this model.
This is IWISS IWS-2820M crimper holder for IKEA Skadis pegboard. This item is inspired by IKEA SKADIS Collection by CSD Salzburg, it uses the same hook system (I included the hook). Check out the collection of other IKEA Skadis holders I…
I combined together the Rugged parametric case with the model done by @Crixiss_276992 to create a case for this crimper. You need 4x 30mm thread-length M3 screws If you have other screws, please edit the parameters of the Fusion360 file…
One of the biggest differences between proper OEM crimp tools and the cheap ones is the presence or lack of a locator that holds the crimp terminal in place at the proper depth, and allowing the wire to be inserted with the jaws wide…
Original awesome remix part from Keep Making, please visit: https://www.multiboard.io https://www.multiboard.io/license
