23 models
Callooh! Callay! The Jabberwock is ready for release! Yes, this is a real Dungeons and Dragons creature, he is featured in the adventure The Wild Beyond the Witchlight. This manxome beast comes in three poses: one for standing on the…
link to my files im using https://github.com/Val-dose-things/Jabberwocky_files LDO Jabberwocky SV08 mount (will need feedback for the SV08 MAX and ZERO. I'll make a lever stop shortly. the 2.5x8mm screws are used for mounting the lever…
All Front_Body_Diffuser STLs are printable in dual‑tone with a filament swap (M600).
You will need: 4mm SQUARE carbon rod (four 125mm ish sections in total so a 500mm rod should be enough or buy a 1000mm one if you wanna make 2) 2 springs out of normal spring steel (ours have the dimensions of 4mm diameter 73mm length or…
These updates are based on the Jabberwocky v82 design and include several new features: Cable Management: Added a new cover for better organization. The motor mount was redesigned to allow probe cables to pass through the interior for…
Wiring You must create or obtain a compatible cable for the LDO Nitehawk 36 USB connector in order to connect the BTT Eddy probe. A standard cable is not included and must be sourced or made separately. Mounting Hardware Use M4 × 6 mm…
Three gears broke, so I decided to make a minor modification to the Jabberwocky extruder. you will need this…
Just a fearsome jabberwocky. Still learning
To get full use out of this model, check the files it was remixed from. You will only find the mounting bracket here. This mounting bracket is a bit shorter to accommodate for the jabberwocky toolhead being shorter than the stealth…
I could only find one other eddy mount for the Jabberwocky toolhead, but couldn't figure out how to install it , or even which mount if went on, so i created one. I am using the Voron Legacy mount found in the Jabberwocky GitHub. It…
A cover for the Vitalii3D CNC Front Idlers that helps your Jabberwocky cutting arm compress fully to cut filament.
I had two problems with the OG adapter plate on my machine: the adapter rests on the belt bolts and not the carriage plate and although the dove tail works really well the assembly pivots by the cartographer bolts in X and Y. In this…
Print with 4 walls and 30% rectilinear infill. This design is strong in compression and will resist bending. By removing the ducts this remix should improve airflow at the back of the toolhead which is already cluttered by the jabberwocky…
edit of the NH36 mounting bracket to accommodate stealthchanger mounting and tap sensor. also used m3x16 screws to mount this bracket to the standoffs to give the height for the tap pcb I used 3xm3 nuts as spacers
Modified the bolt pattern and part fan cooling duct length on the body to account for the additional length.
Print in the orientation as downloaded using standard Voron Settings. Depending on the variation of your printer you may scale it up or down ~2% without issue to obtain a tighter or looser fit.
The prebuild V82 Jabberwocky I received had the thermistor wires running over the mounting plate. I did not want to mess with a the build so this remix adds a small recess to the mount plate for them. Many thanks to Valarie Moore for the…
This is a cover that slides over the front idlers of the Trident R2 so that the Jabberwocky toolhead's filament cutting arm has something to press against. The fit over the idlers is meant to be slightly snug so that it stays on by…
This is a fixed cutting point for the Voron V0.2 with the Jabberwocky toolhead. To mount the extension I reused 2 hex nuts from the magnetic door stop, which I do not use anymore. At the top it is pushed into the extrusion. With this…
To get full use out of this model, check the files it was remixed from. You will only find the mounting bracket here. This mounting bracket is a bit shorter to accommodate for the jabberwocky toolhead being shorter than the stealth…
Wiring You must create or obtain a compatible cable for the LDO Nitehawk 36 USB connector in order to connect the BTT Eddy probe. A standard cable is not included and must be sourced or made separately. Mounting Hardware Use M4 × 6 mm…
edit of the NH36 mounting bracket to accommodate stealthchanger mounting and tap sensor. also used m3x16 screws to mount this bracket to the standoffs to give the height for the tap pcb I used 3xm3 nuts as spacers
The mighty owlbear traveled across Thither with her companion, an elven man. Juniper pulled a finely-crafted chariot atop which her companion rode. Some time later, Juniper's elf companion went missing. He was believed to have been…
