Counting matching models…
Needed something to de-clutter my wife's box of bobbins. Printed this. Janome bobbins will snap nicely into place, but still not be under pressure, so the print works nicely with PLA, ABS and PETG. Print instructions Category:…
Hier gibt es einen Einsatz der genau in den SQ14 Rahmen von einer Janome MC550E und kombatiblen Modellen von zum Beispiel Elna passt. Der Stoff wird mit einer Klemmplatte gehalten und nicht überdehnt. In Ober und Unterplatte sind Magnete…
Replacement large thread spool cap for Janome domestic sewing machines. Print instructions Category: Hobby Summary Replacement large thread spool cap for Janome domestic sewing machines. Disc and centre printed separately and will push…
These clips are compatible with the Janome embroidery machine. A 10x10x4mm magnet from amazon will fit the clip and can be attached with a 12mm m3 screw.
By redesigning with FreeCAD, you can fit this holder into your sewing thread spools on your coverstitch machine, Babylock, etc. SHA256 checksum 8c31f2c0218e9d22fff83981654d53168124faf3a69c68335307313f5cc1c333 torneio.FCStd…
Prints without supports, magnet is inserted/glued after print. I used neodyme magnet size 10×10×5 mm, but you can use any reasonable sized magnet if you adjust mag variable in scad source. You can also adust tray dimensions using tray_*…
These 3D printable files are designed specifically for storing bobbins from the Janome HD9 v.2 . The bobbins for this machine are larger than standard household machine bobbins. (Edit: There was a small mistake in the first version of the…
Diese Unterfadenspule ist einfach zu drucken. Sie braucht keine Unterstützung beim drucken. Gedruckt in PLA und Standard-Einstellungen. Schichtdicke 0,2mm Düse 0,4mm Nach dem Druck müssen beide Teile mit etwas Kleber zusammengeklebt werden.
I noticed that with continued use the wedge shape of my wife's sewing machine (model Janome 4300 QDC) foot control was being pushed against the wall under the worktop and the movement caused it to make marks on the decorated wall. What I…
Diesen 7-fach Spulenhalter habe ich für die Janome MC550E gemacht. Nun braucht man nicht ständig die Spulen während dem Sticken zu wechseln. Alle Farben werden nun vor dem Besticken des Objekts vorsortiert und dann nur noch eingefädelt.…
Janome Embroidery Presser Foot fits 200E Machines Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: .2 MM Infill: 30 % Filament: Hatchbox PLA White Category: Parts
Designed in TinkerCad. Printed at 0.2mm layer in PLA on my SKR BMG Bear.
Thread take-up lever linkage for New Home JD1722 sewing machine, may fit others - looks similar to other models.
I wanted to attached a thread cone to my HD-3000. There are no convenient screw locations that can be used for this sort of thing. While experimenting with potential mounting locations, I created models for the vertical spool socket and…
Simple finger protector to not get cut by the overlock knife, snaps to the side of the bottom cover
This buttonhole sewing foot attachment lets you use Janome's 1-step buttonhole sewing function easily. It engages the sensor of the machine, and is adjustable using a M2 screw. You are advised to try the size on a spare piece of fabric…
Simple adapter to use serger/overlocker thread cones on the Janome EasyJeans22. This needs to be removed when refilling a bobin, which is a compromise I was happy to make for ease of mounting.
Has your original spool pin that comes in your machine broken? Not a problem. We’ got you covered. This genuine Janome Spool Pin replacement is easy to install your self, and you will be back and sewing very quickly! This Janome Spool Pin…
I didn't like how the stitch guide on my sewing machine got in the way when it's attached to the machine, but I still wanted to be able to see the options I had available. I have a JW8100 sewing machine, but this probably works for some…
Hier gibt es einen Einsatz der genau in den SQ14 Rahmen von einer Janome MC550E und kombatiblen Modellen von zum Beispiel Elna passt. Der Stoff wird mit einer Klemmplatte gehalten und nicht überdehnt. In Ober und Unterplatte sind Magnete…
By redesigning with FreeCAD, you can fit this holder into your sewing thread spools on your coverstitch machine, Babylock, etc. SHA256 checksum 8c31f2c0218e9d22fff83981654d53168124faf3a69c68335307313f5cc1c333 torneio.FCStd…
I didn't like how the stitch guide on my sewing machine got in the way when it's attached to the machine, but I still wanted to be able to see the options I had available. I have a JW8100 sewing machine, but this probably works for some…
Organizer for holding Janome sewing machine feet in their original packaging. Each box is designed to hold 4 feet so you can see them from the side. The box is designed to fit on a standard ¼" pegboard.
This 2 piece item allows you to place a larger thread spool on your Janome HD3000 or HD 5000. Probably fits others as well if your spool holder has a square receiver for spool holders. Requires 1 608-2RS Skateboard Bearing, Rolling…
This 2 piece item allows you to place a larger thread spool on your Janome HD3000 or HD 5000. Probably fits others as well if your spool holder has a square receiver for spool holders. Requires 1 608-2RS Skateboard Bearing, Rolling…
The OEM cover broke with old page and only 3 pin covers can be purchased. .ipt file included in case you want to modify it.
created to replace missing #0 cam template for Janome sewing machine Janome Cam Template ( X ) is for customize shape printed in PETG or PLA
This 2 piece item allows you to place a larger thread spool on your Janome HD3000 or HD 5000. Probably fits others as well if your spool holder has a square receiver for spool holders. Requires 1 608-2RS Skateboard Bearing, Rolling…
Holder for Janome embroidery hoops SQ14b, SQ20b, RE20b, RE28b and RE36b on IKEA SKÅDIS pegboard. Also needed: Skadis_Universal_Hook.stl from https://www.thingiverse.com/thing:2853261 Lying print without support Halter für Janome…
This addition enables the embroidery of baseball caps with the Janome Memory Craft 300E, 350E, 400E, 500E, 550E, 9500, 9700, 10000, 10001, 11000, 11000SE in combination with the RE20b or type b frame. In the version before V2, the…
Holder for Janome embroidery hoop HH10b from Bauschlumpf ( https://www.printables.com/de/model/828743-cap-hoop-for-janome-elna-re20b-or-type-b-like-hh10 ) on IKEA SKÅDIS pegboard. Also needed: Skadis_Universal_Hook.stl from…
