29 models
JCreateNZ - Commercial License Available --- Keycap switch top and base. Fits over a keycap to fully enclose it - I made this as a base to model fidgets / clickers over. Free for personal use, if you would like a commercial license to…
JCreateNZ --- I bought Bar Keeper's Friend but it didn't come with a lid, so I made one. Should fit both Barkeeper's friend cleanser and cookware cleaner & polish. If your printer is accurate it will snap on for a tight fit and seal (but…
The knobs on my stove broke so I created new ones. The width of the pin it pushes onto was 6mm on my stove, however I have made multiple sizes. Free for personal use, if you would like a commercial license to sell this model please check…
JCreateNZ - Commercial License Available --- This model is a round tsurikawa! the classic tsurikawa shape. This tsurikawa has a diameter of 10cm and is 1cm thick. Tsurikawas are designed to work with a 1 inch (25mm) nylon strap, 2x M4x10…
JCreateNZ - Commercial License Available This is the model for the top section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts). See the images of the assembled tsurikawa…
JCreateNZ - Commercial License Available This is the model for the top section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts). See the images of the assembled tsurikawa…
JCreateNZ - Commercial License Available This is the model for the top section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts). See the images of the assembled tsurikawa…
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
JCreateNZ - Commercial License Available This model is a tool for accurately punching the holes in a tsurikawa strap - for use with my tsurikawa strap locks (see my other designs for the free files). You can make a tsurikawa strap without…
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
JCreateNZ - Commercial License Available --- This model is an awareness ribbon tsurikawa! This tsurikawa is 8cm wide, 10cm tall and is 1cm thick. Tsurikawas are designed to work with a 1 inch (25mm) nylon strap, 2x M4x10 screws and nuts,…
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
JCreateNZ - Commercial License Available This is the model for the top section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts). See the images of the assembled tsurikawa…
Recently, two Barbary doves have come to live in our garden - I looked for a birdhouse that would be suitable for them but couldn't find one, so I made my own! This model is a bird house - it is designed to be as large as possible for a…
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
Needed a car rego pouch / holder so made one. Use small strips of badge tape along the three edges to stick it to the window (stick the tape on then trim with a craft knife). Fits New Zealand standard vehicle registration label ( NZTA…
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
JCreateNZ - Commercial License Available This is the model for the top section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts). See the images of the assembled tsurikawa…
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
JCreateNZ - Commercial License Available This is the model for the top section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts). See the images of the assembled tsurikawa…
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
JCreateNZ - Commercial License Available --- This model is a Mt Fuji hanging charm / keychain! This charm is 12cm wide, 5cm tall and is 6mm thick. Charms are designed with a 'channel' to allow for a 2.4mm (or smaller) ball chain to be…
I designed these weapons to be used with the Just Cuz Robotics RDY-MINI-5022 antweight hubmotor. So far only the “LeadingEdge” has seen real combat. It had several full speed hits against the arena walls and came out with only chipping…
Needed a car rego pouch / holder so made one. Use small strips of badge tape along the three edges to stick it to the window (stick the tape on then trim with a craft knife). Fits New Zealand standard vehicle registration label ( NZTA…
