Counting matching models…
I modeled New Jean's Binky Bong light stick. The full project costs about $50 USD to make and the links for everything I used are below (American links). Print Instructions: I printed these on a Creality Ender 3. I made a little mistake…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Tired of having to throw away your jeans just because the button is ripping out of the fabric? No spare clothing on your business trips? Your children too enthusiastic in the playground? Went out of control in an all-you-can-eat…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Jeans button replacement with M3 countersunk head screw and nut. I needed this button when the one on my Levi's jeans just fell off. Different versions. - Version 3: Insert M3 nut during print. No visible screw afterwards. - Version 2: M3…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
This Casual Woman STL captures the natural elegance of a relaxed, confident pose — blending realism, anatomy, and fashion detail. Detailed sculpt : accurate anatomy, realistic fabric folds on jeans and crop top, soft body lines, and a…
If your favorite jeans lost their button. You can use one of these. Here comes a set of four different buttons. Turn the top to your printbed and you can start. I recomment a layerheight of 0,15mm. You can use PLA or PETG, for details use…
Explore various genres on my profile. New models every day! All print-tested. Follow me so you don't miss any new designs. Thanks for your support! ❤ ⚠ WARNING: This model has no base! I recommend enabling BRIM in your slicer for better…
Add striking realism to your collection with this Realistic Tattooed Male Figure , a highly detailed modern character sculpt designed for lifelike display and contemporary dioramas. Featuring a muscular, anatomically accurate physique,…
Standard-Jeansknöpfe aus Metall können ausreißen, und Ersatzknöpfe aus PLA oder PETG sind oft zu spröde für die mechanische Belastung am Hosenbund. Dieses Design nutzt die spezifischen Materialeigenschaften von TPU 98A , um Spannungen…
I fooled the AI by erasing her arm sticking out and it put it on her hip instead.
Capture the essence of modern street style with this stunning 3D printable figurine that brings dynamic pose and contemporary fashion to life! This detailed STL model showcases a confident female figure in trendy ripped jeans and casual…
Capture the essence of modern femininity with this stunning female figure 3D print model that brings contemporary style to your collection. This beautifully detailed STL figurine showcases a confident woman in casual jeans and fitted top,…
Transform your space with this stunning female figure 3D print model that captures contemporary street style in perfect detail. This elegant STL file features a casual yet sophisticated woman in trendy jeans and hoodie, making it an ideal…
Well Prusa had a contest and I had a pair of jeans in need of a new button …
Funny Otto Shirt Button size 13.7x14.5x2.5mm, im added big button x2 size with more detail., but you can scale it to adjust to your clothe. Thanks!
Previously known as the return button it is now on ANSI US keyboards it is labelled as ↵ Enter button by Windows OEMs (sometimes even without the return symbol)
Every biologist knows that that tiny jeans pocket you thought was useless, is actually specifically designed to thaw frozen non-toxic reagents kept in eppendorf tubes, using the magical power of your body heat. However, what do you do…
Introduction Has it ever happened to you that your jeans got into the bike chain when cycling? This can leave nasty oil stains and - in the worst case - rip your expensive jeans. Fortunately, this is very easy to prevent with a clip. This…
Made from pics I found & liked. Models may not be perfect. Made to 150mm (may differ due to pose). Made in STL & 3MF
Use at least 3–5 perimeters for better durability. I personally printed it in PETG with 5 perimeters, 90% rectilinear infill, and manual supports to support the main "hooking" part. UPD: V2 has a 45-degree angle at the front of the hook.…
Add striking realism to your collection with this Realistic Tattooed Male Figure , a highly detailed modern character sculpt designed for lifelike display and contemporary dioramas. Featuring a muscular, anatomically accurate physique,…
Standard-Jeansknöpfe aus Metall können ausreißen, und Ersatzknöpfe aus PLA oder PETG sind oft zu spröde für die mechanische Belastung am Hosenbund. Dieses Design nutzt die spezifischen Materialeigenschaften von TPU 98A , um Spannungen…
Explore various genres on my profile. New models every day! All print-tested. Follow me so you don't miss any new designs. Thanks for your support! ❤ ⚠ WARNING: This model has no base! I recommend enabling BRIM in your slicer for better…
Two files are included, one with the keychain hole and one without it. To get the best effect multi-color printing is recommended. You can scale it depending on what size you want. Personally, I use 70%. Print settings: Layer height:…
My real 3d scanned penis while wearing jeans (flaccid). Message me for real pics ;) Check out my Erect Version https://cults3d.com/:2488684
— Česká verze je níže. — Both halves of the board are the same. Print the board 2x and glue them together. Leave the glued parts on a flat table to prevent the entire board from bending. The overall size of the board is A4 (210 x 297mm).…
It has a 0.5 mm tolerance so it can fit easily and i recommend to glue the letters to the board
I printed the 18mm ones in PETG at .15 resolution. 100% infill. For the 20mm I printed in PLA with the same settings. I have used these buttons to repair my jeans. These are dryer safe.
This is a replacement button for denim jeans. I had an older pair that the original crimped button pulled out (didn't seem to be crimped to the fabric very well). I used a heat set insert in the button, a washer, and a button head screw…
Undo is a U turn backward, It indicates that you are attempting to return to a place you've already been. or UNDO a previous action. So here is an interesting symbol for a Jeans button, and if you open the button model viewer… rotate it…
This jeans button works great. It holds even in a frayed hole, is very stable, and can also be removed again without destruction, for example, for washing. Especially when the original button of a pair of jeans is lost, the hole that…
The button on my new Lee flexible jeans ripped through so I printed a retainer washer out of TPU
Just a small hook to atach anything you like and wear it. enjoy :) no suports required I recomend printing this in PETG
Simple adapter to use serger/overlocker thread cones on the Janome EasyJeans22. This needs to be removed when refilling a bobin, which is a compromise I was happy to make for ease of mounting.
Altura Recomendad 150mm Diseño Este modelo 3D de temática occidental presenta a una vaquera con un estilo detallado y realista, ideal para coleccionistas y entusiastas del western. Uso Se puede utilizar como elemento decorativo o en…
This unique pen holder is designed in the shape of a pair of short jeans, combining everyday functionality with a playful and eye-catching design. Detailed elements like the zipper, pockets, seams, and waistband give it the look of a real…
An original 3D printable pen holder shaped like women's denim shorts, designed to add an ironic and creative touch to your desk. The model carefully reproduces typical denim details: stitching, back pockets, and belt loops, featuring a…
An original 3D printable pen holder shaped like men's denim shorts, designed to add an ironic and creative touch to your desk. Ideal as a pen holder, pencil cup, or desk organizer, it is perfect for both home environments and creative…
Use at least 3–5 perimeters for better durability. I personally printed it in PETG with 5 perimeters, 90% rectilinear infill, and manual supports to support the main "hooking" part. UPD: V2 has a 45-degree angle at the front of the hook.…
⚠ WARNING: This model has no base! I recommend enabling BRIM in your slicer for better bed adhesion and to prevent print failure. If you like this model, don’t forget to check out my other creations in my collection — you might find…
⚠ WARNING: This model has no base! I recommend enabling BRIM in your slicer for better bed adhesion and to prevent print failure. If you like this model, don’t forget to check out my other creations in my collection — you might find…
Bring elegance and modern style to your space with this stunning 3D printable STL figurine that captures contemporary feminine fashion in exquisite detail. This sophisticated female figure model showcases a woman in stylish casual wear,…
Capture the spirit of the Wild West with this stunning 3D printable cowgirl figurine that brings authentic western charm to any space. This beautifully detailed STL model showcases a confident cowgirl in classic jeans, western shirt, and…
Transform your space with this stunning modern girl figurine that captures contemporary street style in perfect 3D printable detail. This captivating STL model showcases a confident female figure in stylish ripped jeans and hoodie,…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 160x200mm in size Filaments Used: PLA PolyLite Pro Black Transmission Distance: 0.3 PLA PolyLite Pro Blue Transmission Distance: 1 PLA Eryone…
Please adjust to your desired dimensions. I tend to like 3.5-4inches for the longest length and .6inches for the depth.
Lost the stylized Lucky Jeans Button from my favorite pair of pants. Sure, I could use any old button, but it wouldn't have the same flair... So 3D printing to the rescue! Category: Fashion
Bobbin + bobbin case (Toyota Jeans), compatible AISIN-1 printed with nozzle 0.4, layer 0.2, no support needed
Carrying one or more keys without a cover in your jeans pocket imposes a significant risk for your pockets and your smartphone (if that is in the same pocket). The key might poke through your pockets and you will loose it. Or it will…
It´s a support tool for sewing of jeans. I don´t know more about that. My mother asked for it, and it works.
This is a new version of my 1/87 H0-scale miniature figures. This time a woman wearing either a pullover or a hoodie with different hair styles. All different options can be combined in the attached blender-file. I added some…
