Counting matching models…
This lure is my go at a 3d printed jerkbait which sadly are very rare to find on printables or thingiverse. I designed this off of the Westin Swim and gave it the same details. I would be very happy about some makes or even fish you…
Jerkbait Fishing Lure Description: Discover the innovative Jerkbait fishing lure, specially designed for discerning anglers like you. This lure allows you to adjust the casting weight and balance individually – easily through the Bambu…
First try designing a fishing lure, been making them for years from wood, but decided to model one, so everybody could use it. -it is wire trough lure, made for 0.8mm wire -i haven't printed it yet(I'll update you, as soon as i make it)…
A test Piece to calibrate Linear Advance and Jerk.
Use these hooks to hang up your meat for making Biltong (Beef Jerky)
Jerk plastic fish bait for baitcaster or spinning. Print with support if necessary. Adjust infill to help with floatation. Pockets for rattle weights or lead shot . Adjusting the infill and weights added can make it a sinking/ suspending/…
Quick vase mode print to tune Jerk. Goal; print model in vasemode with increasing jerk settings, then measuring which jerk value is the lowest possible, without sacrificing quality
the image is the original from Gemini ender3V3 0,2nozzle valejo Colors Supportfree modellation from Blender Have fun BAD Paintjob as i am OLD ++++ PLEASE see the Other Female's i made for Boardgame
holds either 42 or 44 baits, has two removable compartment covers
I still like my old IKEA “Jerker“ writing desk with its rails and extra boards to put things on. But as always you never can have enough storage. Yes the desk is not the nicest, but I could not find a better one that can keep so many…
Simple prototype model and build of a jerkstopper for USBA-Male to USBA-Female cable. I printed this in a low resolution setting and it worked so well I didn't bother to optimize it. This can easily be modified to reduce material…
Inspired by Pompano Brownies Big Bertha DIY Beef Jerky Gun on Thingyverse… I made my own simpler version using : 1x normal silikon gun for 50mm diameter cartridges 1x 21,5cm piece of a waterpipe 50mm x 1.8mm (both bought in a hardware…
Pencil and tool holder. JERKER IKEA table. Držák na tužky a nářadí. Stůl JERKER IKEA.
Mount your Plugable 7-Port USB Hub (USB3-HUB7c) securely to the IKEA Jerker desk frame. USB Hub slides in the top of the mount. I included a slit in the top face so the led lights indicating connection are still visible. Mount uses ¼" x…
Holder for digital caliper IKEA JERKER Desk Držák na plastovou šupléru (posuvné měřítko) (Stůl JERKER)
Mount your Dell WD19 laptop dock securely to the IKEA Jerker desk frame. I based this on SirJoga's Thingiverse post (https://www.thingiverse.com/thing:4877019) though in the end I made it up from scratch with my own measurements as a base…
Headphones hook/mount for two headsets, which I design to fit my IKEA Jerker Desk. There are four pieces, and only two unique parts. No hardware, so it's easy to readjust the height. Enjoy! NOTE: (Max headband width: 40mm)
One holder is an extension cord for the Powercube and the other is for the Powercube. Holders need to be filled 100%. CZ Držák stačí jen nacvaknout na hranu stolu. Jeden držák je na Powercube prodlužovák a druhy na Powercube. Držáky je…
Hanger JERKER table. Neck laces, Lanyard or something light. Hák na tkaničky nebo něco lehkého.
not as much of a jerk as you could've been award, as presented in a escene/meme of avatar the last airbender. better printed in a multicolor machine.
I printed this in PLA but i dont use any heat in my box. If you plan to use heat better with PETG.
Inside should be bag, 1L zip bag from IKEA works great.
This part allows the Nesco Food & Jerky Dehydrator (model number FD-75PR) to be used for drying filament. Place it between the base and top of the dehydrator (in place of the shelves), It's 343mm in diameter by 89.5mm high - it just…
I wanted a holder for my Bose QC35 II headphones and, like amarand didn't want to damage the headband, so was please to find his design . I wanted it to fit under the slide out shelf of my original IKEA Jerker desk, which has a metal end…
Fits into a 90 degree corner and holds the jerky gun so that you can use both hands to load ground beef or other ingredients into the jerky gun. This is made to be an exact fit for the Lem Jerky gun (53.5mm external diameter). I suggest…
I create in the anyLab Commercial License: Want to sell physical prints of these models? Get a full commercial license and access to my models by supporting my Patreon : https://patreon.com/3Dwex
Two Sconce-like mounts free up desk or shelf surface. The depth and fit holds the charging base securely while the speaker can be lifted away. Held in place by one bolt and two pins positioned to fit the discontinued IKEA desk “Jerker”…
JERKBAIT – 3D PRINTABLE FISHING LURE 🇬🇧 ENGLISH DESCRIPTION An original jerkbait fishing lure designed for an aggressive side-to-side action when worked with sharp rod twitches. The lure features deeply embossed scales and a two-part…
Couldn't find anything so I made this model for testing speed-acceleration-jerk combo and seam settings on a model closer to real models instead of a 1-walled lying lab tower... Designed for three 0.42 walls. Use seam painter to set seams…
Nothing washes a mayo tuna salad on white and a couple of Twinkies down better than a sugar free Tab.
a very simple USB-Keeper Keycap-Addon-thing. this addon is intended as an addon for the ikea Jerker USB-Keeper by Erik004 . as i kind of noticed that despite the glorious design of the usb-keeper, my keycaps were still not accounted for.…
holds either 42 or 44 baits, has two removable compartment covers
Nothing washes a mayo tuna salad on white and a couple of Twinkies down better than a sugar free Tab.
Couldn't find anything so I made this model for testing speed-acceleration-jerk combo and seam settings on a model closer to real models instead of a 1-walled lying lab tower... Designed for three 0.42 walls. Use seam painter to set seams…
STOP BEING A JERK! THERE, NOW I'M YOUR LIFE COACH, sign Category: Signs & Logos
STOP BEING A JERK! THERE, NOW I'M YOUR LIFE COACH, sign Category: Signs & Logos
Mount Plug'n brand power strips (like https://amzn.to/3QIUulc ) to your IKEA Jerker desk -- no screws needed! Need to print 2 per power strip, of course. Holds the power strip just far enough away that it will fit over any (standard…
I found this image on facebook and made it into an stl. I have no affiliation with this group. Gemini told me this was a disk golf group called circle jerkers.
Raccord IKEA Jerker pour réhausse Ceci est le raccord pour fixer la réhausse du bureau IKEA Jerker (j'ai un V1, mais cela doit aussi fonctionner pour sur les montants d'un V2). Quand on dispose de l'option réhausse (qui se monte au-dessus…
!! A work in progress !! Possible to print standing on it's tail without any supports (requires good bed addhesion). Settings that work best right now: PLA 60% infill (grid) 3 walls, 3 top, 3 bottom Does not require weights to be added,…
Here's my fruit cake from me to yall! Hot from the oven and full of lovin' Enjoy the JerkMaker-9000... Plankton's own, with Fruit Cake so bad it will take the Christmas spirit right out of you! Printed on Photon Mono 4. Requires Supports.…
Držák na nohu stolu JERKER. Bez šroubů stačí jen nasadit na nohu. JERKER table leg holder. Without screws, all you have to do is put it on your foot.
Pencil and tool holder. JERKER IKEA table. Držák na tužky a nářadí. Stůl JERKER IKEA.
a very simple USB-Keeper Keycap-Addon-thing. this addon is intended as an addon for the ikea Jerker USB-Keeper by Erik004 . as i kind of noticed that despite the glorious design of the usb-keeper, my keycaps were still not accounted for.…
I've got a jerky gun that's a constant hassle to store. When you stand it up in the cupboard, it always manages to find a way to lay down sideways and get tangled up in allll the other things in behind it. I made this little cradle. The…
The Jerk - Navin R. Johnson (Steve Martin) - 1979 3D printable model.
Držák na nohu stolu JERKER. Bez šroubů stačí jen nasadit na nohu. JERKER table leg holder. Without screws, all you have to do is put it on your foot.
I designed this holder for the link cable for my Facebook spy device. It holds a fairly large and girthy cable, and protects your USB ports from being ripped out if you wind the cable properly, like in the image. You'll need screws to…
Cable holder/organizer that bolts on to the vertical support side rails of an Ikea Jerker desk.
Cable organizer for running cables along the cross bar below the IKEA Jerker desk.
A mounting bracket for the IKEA Jerker desk to use with the Multifunction arm by RostaP My Print Settings: 6 Walls 35% infill (or more) Cubic Infill 0.2 Layer height (upto 0.3 should be fine) Tested with PLA+ and PETG
A bolt-on Speaker Shelf for the Ikea Jerker desk. This is shaped specifically for the logitech speakers I use, but I have included model files so that you can modify them to suit yours.
Small stand to organize and display my jerkbaits a bit better. Nice to show them off in a vitrine to other friends ;)
jerkbait - oryginal size 200x55x30 with 15 mm holes, tail twist angle 40 degrees, perfectly imitates an agile fish :) perfectly balanced , pikes love it! guarantees effectiveness :) the tail can be printed separately from a flexible…
I wanted a phone holder that would stay out of the way by hanging on the edge of a shelf on an Ikea Jerker desk, so here it is. Picture shows a Pixel 6A. I printed with 5% infill PLA and it seems sturdy enough. I made a variation that…
Jerkbait 20g 7cm. Necessary things: wire 1.2 mm epoxy resin PETG filament It is necessary to download the template according to which the wire is formed.
