Counting matching models…
This model is of the steel ball weapon from the anime Jojo's Bizarre Adventure. A step version is included to facilitate modification. I had luck printing the halved version (print two copies as the halves are identical) at 0.1 mm layer…
Okuyasu used Za Hando to remove most of Josuke's body! A meme of Josuke from part 4 of Jojo's Bizarre Adventures.
This is the requiem arrow from Jojo's Bizarre Adventure Part 5: Golden Wind used by Giorno Giovanna
The Steel Ball should be rotating in your palm! In this model, this is achieved with a single 608 bearing located at its center. Note: if this seems like fun to you, you might also like the seasonal Easter Steel Egg . Printing The whole…
Print the Yoyo with 80% infill and the yoyo will weigh about 60grams. The screw and the 3mm middle-nut should be printed with 100% infill for strength. The nut should obviously be in the middle of the screw. The screw could break if you…
The charm floating around the Green Dolphin Street Prison, passed onto Jolyne when she is in trouble. If you are lucky, you might develop some bizarre powers. PART 6 Let's Go! Super excited to have this part animated! LocketTop x 1…
Saw the Killer Queen models but none of them was integrated with suports so i merged figurene and supports together
Joseph Joestars steel clacker balls from JoJo's Bizarre Adventure part 2. There is both a full model version and a split. I printed at 35% infill.
Here we have Polnareffs Earrings witch I Modeled with Solidworks. There is the right and the matching left earring in the folders down below in different versions. You will find the .prt File for Solidworks and .step for other CAD…
YoYo, do you need a present or entertain the kids? Print this YoYo with a batman motif, add a thin string and assemblies according to the instructions. You can use a drop of super glue for the connection. Jojo, potřebuješ rychle dárek…
Just finished season two of JoJo's bizzare adventure. Loved Iggy, he is favourite mutt! So I made a sculpture of him you can print. :)
Just a JoJo keychain Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.3 Filament: Prusament PLA Galaxy Purple
ゴゴゴ… Printed and glued a magnet strip on the back of each. Printed these at different scales to get three of em. Kept the Z height the same to make filament swaps easier.
Can be printed and used as an ornament or turned into a keychain. Use any type of plastic that works for you.
Steel Ball 1:1, J.Lo Zeppeli stand (JoJo Part 7 Steel Ball Run) Dimensions (mm) : 80 x 80 x 81 I used around 74 grams of filament Must use supports
Jojo's "To Be Continued" Arrow redesigned as the one available I had issues slicing. Print Settings Printer: Hypercube Evolution Rafts: No Supports: No Resolution: 0.2 Infill: 35% Filament: 3DOn ABS Atlantis Blue Notes: May need a brim…
Emperor Gun Jojo's Bizarre Adventure
suports :no infill: cups 15% lithophane 99% tips: If you found Difficult to remove support i recommend this settings: 0.25mm z distance 75% xy distance 3mm support spacing 4 interface layers 0,2mm interface layer spacing (Hope i help a…
Credit to original creator: https://www.thingiverse.com/thing:5206053
A 3D recreation of the Brooch Giorno wears in the Golden Wind season of JoJo's Bizarre Adventure. Multi-part/color support. A nametag magnet such as this one from amazon is a good way to use this on a cosplay or as a pin.
Today I saw how agsworkshop made a mod for the Montana Mask as the bane mask from the dark knight rises and loved the concept. Since I really Enjoy Jojos Bizarre Adveture (Specially Part 2) and i have already seen quite a few memes about…
litofania de jotaro
A while back I modelled the details for Jotaro's cap from Jojo's Bizzare Adventure - Stardust Crusaders. The files include the band, two different sized buttons and hand detail. The band has been broken down into three pieces for printing…
its a badge with the menacing lettering
Killer Queen can erase you at any time. For you see, Killer Queen can turn anything it touches into a bomb." Killer Queen is a muscled humanoid Stand with cat-like features. Its abilities all revolve around bombs, whose blasts are capable…
Jojo's themed guitar pick
just some 2d logos if you have any questions just ask, you can also propose me more ideas to make If you found this useful, please donate what you think it is worth to my Paypal me. ([email protected]) Help cover the time of design.…
Cream Starter 1:1, Hot Pants stand (JoJo Part 7 Steel Ball Run) Dimensions (mm) : 44.7 x 89.5 x 161.6 I used around 73 grams of filament Must use supports
Easy to attach/print/use :)
Mojo Jojo Mojo Jojo plotting to take over the world from The Powerpuff Girls Single extruder 5 color design First bottom layer: White Second layer: Blue Third layer: Green Fourth layer: Purple Fifth top layer: Black
V2 came with more Joja Tiles and I've updated the Joja holder to accomodate them. Should fit perfectly with the original 3D printed organizer
Who volunteers to go to the farm? The proximity cuff used by the Green Dolphin Street Prison, perfect for a Jolyene, Hermes, or Foo Fighters Cosplay! Careful, don't stray too far! RightSideCuff x 1 LeftSideCuff x 1 GreenDolphinLogo x 1…
Total printing time:~7h33m Used filament:~57,26g 0.12mm layer height . Not colorized Inproved strenght by 2 walls,infill 100% you don't need to add support, the program did it by default.The support is easy to remove and requires no…
Main Print Page Color sequence: Primary Color Blue (Jojo) Green (Animal) Beige (Buildings)
Pomôcky: Niť Skrutka M5x25, matica Vrstva: 0,3 mm Tryska: 0,4 mm Materiál: PLA Pomôcka je vytvorená v programe FreeCAD.
Litophania de Cujoh Jolyne
This is a 3D printable version of the Medicos Jojo SAS Paper Craft Road Roller. Please see pictures for construction. Some DTL pieces need 2x printed with 1 mirrored. Update 7/9/26: Angled Display Stand now avaible. Allows room for Star…
I don't really pride myself by uploading a lithophane as my 3d model but couldn't find any Joji related content on this page so here it is. Printed on stock ender 3v2 with 0.12 layerheight and 0.28 layer width. PLA
King Crimson embodies Diavolo's personality, as he frequently speaks through his Stand. Aside from that, its face frequently possesses a low or irritated expression, though, on rare occasions, it also shows a triumphant grin when certain…
Tento model je pouze podobný joju od JOJO Factory, berte to na vědomí, prosím, pokud budete prezentovat, což je zakázáno (!) toto jojo jakožto jojo od JOJO Factory, neneseme za to žádnou odpovědnost.
This model was inspired by JoJo's Bizarre Adventure the anime series. Sticky Fingers is a humanoid Stand that mirrors the height and build of its user, Bucciarati. Covering the upper half of its face, it wears a helmet adorned with a…
Your girlfriend asks what kind of wallpaper do you want to hang? Don't worry and download this model. Now your interior will be harmonious and your relationship will be happy, because HOW CAN YOU GIVE UP JOJO the handle mechanism is…
Total printing time:~8h5m Used filament:~47,91g 0.12mm layer height . Not colorized Inproved strenght by 2 walls,infill 100% you don't need to add support, the program did it by default.The support is easy to remove and requires no tools.…
Oh my God! Joseph Joestar from JoJo's Bizarre Adventure Decor
Well, Jotaro and Star Platinum on a E3D Buggy because yolo. Remix of: https://www.thingiverse.com/thing:4374819 https://www.thingiverse.com/thing:4586114
Jojo - Dio Brando Road Sign Category: Toy & Game Accessories
🥚 Introduction How does Gyro celebrate Easter? By replacing his regular steel ball with a steel egg ! For printing, there are two options: The full rotating fidget (four printed parts plus bearing and weights) A plain egg , just for…
Keychain for Dutch "drop jojo" liquorice candy.
A highly detailed 3D printed collectible bust of Noriaki Kakyoin, the brilliant and loyal Stand user from the legendary anime and manga series JoJo's Bizarre Adventure: Stardust Crusaders. This stunning miniature model beautifully…
A highly detailed 3D printed collectible bust of Joseph Joestar, the charismatic and cunning protagonist from the legendary anime and manga series JoJo's Bizarre Adventure: Battle Tendency. This stunning miniature captures his confident…
Giorno Giovanna's famous ladybug brooch from hit anime and manga series JoJo's Bizarre Adventure. This model incorporates design aspects from both the manga and anime: the pattern and design from the manga and coloration from the anime.…
okoyasu and the hand are my fav characters so i made a dummy 13 the hand head .(Its my first ever model to create so pls no hate i did my best)
My granddaughter loves to have fights with her dinosaur toys. I made her 2 monsters to expand her collection.
JoJo's Bizarre Adventure Menacing Decor
Vlascový závěs na rostliny je praktická pomůcka pro pomocné zavěšení rostlin ve skleníku či na zahradě. Závěs má výměnné háčky jak na zavěšení těla závěsu, tak i na vyvěšení rostliny, či větví. Je určen pro vlasec 0,5mm a na cívku se ho…
pour commencer, la figure utilise un model déjà créer mais il a ses propre accsessoire.
I don't know if anyone will actually download this except me.
Model of the no dignity meme from Joju's bizarre adventure part 4 (Diamond is unbreakable) With smoothed edges to prevent pealing.
JoJoman made me a trophy, so here's his. I let my inner child show.
robot de R.E.P.O. inspirado en un personaje de anime utilisado el mismo diseno de construction.
A highly detailed 3D printed collectible bust of Caesar Anthonio Zeppeli, the proud and skilled Hamon user from the legendary anime and manga series JoJo's Bizarre Adventure: Battle Tendency. This stunning miniature model beautifully…
Detailed 3D printable Chibi Dio Brando From Jojo With The World Stand figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
The Polnareff's earring from the anime JoJo's Bizarre Adventure I looked for this earring on a bunch of different platforms, but I couldn’t find anything I really liked, so I decided to make my own design! Unlike some other creators, I…
he made me a follower trothey so i made this for him go download his models
Cream Starter 1:1, Hot Pants stand (JoJo Part 7 Steel Ball Run) Dimensions (mm) : 44.7 x 89.5 x 161.6 I used around 73 grams of filament Must use supports
Steel Ball 1:1, J.Lo Zeppeli stand (JoJo Part 7 Steel Ball Run) Dimensions (mm) : 80 x 80 x 81 I used around 74 grams of filament Must use supports
this is the letters from the hat of diego brando in jojos steel ball run
pour commencer, la figure utilise un model déjà créer mais il a ses propre accsessoire.
This is a 3D printable version of the Medicos Jojo SAS Paper Craft Road Roller. Please see pictures for construction. Some DTL pieces need 2x printed with 1 mirrored. Update 7/9/26: Angled Display Stand now avaible. Allows room for Star…
Jojo's Bizarre Adventure I'm a huge fan of JoJo's Bizarre Adventure, and since Jotaro’s true form is his hat, I created a fanart version of it and shared it with everyone. The print file includes the original version( Long 48mm), a…
A 3d printable model of Bridgets Jojo from the videogame Guilty Gear
A test cat created using www.doodle3d.com as a demonstration for our students
This model fits perfectly on the Gridfinity base plates. I made it to neatly store a yo-yo, but it can of course be used for anything round. It has a 56.6 mm wide and 15 mm deep hole.
this is the letters from the hat of diego brando in jojos steel ball run
DiverDown was delivered with only one elbow protector to my trainee, so we decided to create this spare part. Print it with rafts so, how the stl-files are. Print Settings Printer Brand: Anycubic Printer: Predator Rafts: Yes Supports: Yes…
Credit to original creator: https://www.thingiverse.com/thing:5427331
Scroll down for the english translation… “ JOJO ” als druckbare LED- Namenslampe. Druckeinstellungen: Infill 8%, no Supports, 0.2 mm (Möglichst die Z-Naht so verstecken, dass sie an den Klebepunkten ist.) PLA (nicht UV-beständig, besser…
it's jojo's bizarre advanture's signiture SFX text, ゴゴ made by Hueforge. Shoud print this order used Black until layer 5 used Darker side color(TD 6.0) until layer 14 ( i used Sunlu Red in example) used Light side color(TD5.0) till end (…
To you want to remove ice from the windshield and give your car a stand? Use this!
Dice set with sharp edges inspired by JoJo's Bizarre adventure
Tower of Gray : Jojo's Bizarre Adventure: Diamond Records
