Counting matching models…
Prints in one piece - no assembly or screws required. It slots onto the right-hand side of the Joolz Air+ stroller where there is a little notch, as shown in the video. It rests on the bar, not the notch, so it should be pretty strong.…
We wanted to add a cupholder to our baby stroller which fits all sorts of cups and baby bottles. The cupholder is mounted on the left and/or right inside of the handle. There is by default a mount (knob) there. Cupholder fits Philips…
We needed a cupholder for our stroller . So first I look for the options that were available and my favorite was https://www.printables.com/model/644449-joolz-geo-stroller-cupholder sadly in our stroller the cup was tilting so I decided…
Gyroscopic cup holder. The rings are modified from the original for better fit with screws, and nuts. Requires 2 12mm, 2 16mm M2.5 screws, and 4 M2.5 nuts. Use Loctite to secure screws in nuts. Print without supports. STEP files are…
I printed it with Polyterra PLA. 4 perimeters and 100% infill. Support is needed!
We wanted to cover our baby better from the light during sunny days. the model from ArnieX was detaching super easy from our stroller so I decided to make it more sturdy . hopefully this also works better for you. remix from ArnieX…
A holder for a common type of self scanner found in AH, Jumbo, Plus supermarkt in the Netherlands, Saisbury's and ASDA in the UK, and many more. (Practically every supermarket has the same self scanners). Model is made to clip onto the…
Print it at 45° angle without supports. Longer print time, but much stronger final print. I used fuzzy skin on the outside. Recommended print parameters: Minimum filament: PETG Recommended filament: ABS/ASA Layer height: 0.2mm Perimeters:…
Our Joolz stroller doesn't have an attachment for storage the footboard away. So I created a little attachment that solve this problem for us. BONUS* If printed on 50% scale could be use it as well for the visor as an attachment similar…
A simple hook that was stress-tested for many years on our stroller. There's a cutout to add an M5 x 15mm long (or shorter) button head cap screw for extra piece of mind. This recess also ensures that even with infill, there's enough…
The opening for the bag strap is 26.5mm x 5mm. Two are required. I'd recommend printing at 100% infill. Each clip is 5g of filament. PLA+ seems to work fine, but this would be better printed with a more UV resistant material such as ASA.…
This is a simple clip-on reinforcement I designed to fix the worn sun-canopy mechanism on the Joolz Day stroller. On older Joolz models, the canopy hinge can loosen over time and no longer stay in position. These two printed parts…
A clamp for the plasticlamp system adapted from the original clamp. It's print in place and uses an m3 screw and nut for securing the two halves together. Major props to the plasticlamp designer - this system is awesome!
I didn't want to get the lamp Joolz sells ( I think it's overpriced with limited capabilities, and uses a non-replaceable battery), so I modeled an adapted for a Wurkkos H25S (uses a standard 18650 battery, can charge it, is cheap, and…
This is a Remix of https://www.thingiverse.com/thing:2170054 and https://www.thingiverse.com/thing:684785 to fit my Römer infant car seat on the Joolz Pram. There is an M6x 35 mm bolt with a self locking nut needed to lock the Car seat…
Should be printed in ASA or ABS with at least 5 outer perimeters and 40% infill. Might also work in PETG
This is a replacement grip for Joolz Day² No Support needed. I modified the handle so that it is now more robust.
Redrew the cupholder in Fusion 360. Altered the design so tapered coffee cups (not straight) fit better. For instance Starbucks cups. The mount clip remained the same. Credits to #MKomstachev for the original design and mount. Print…
