Counting matching models…
Why spend your hard-earned money on mechanical switches that cost $0.30 each (or more) when you can print your own for just $0.02 worth of PETG? After numerous revisions, this refined design delivers satisfying tactile feedback that…
Original photo taken from: https://knowyourmeme.com/memes/josh-hutcherson-whistle-edit I will upload my own print photos when I print it for myself, I will also share my print settings.
Just set a pause print at the top of the magnet and two filament changes. White then blue then red. I found that slowing the print speed after changing filament helped with the narrow lines. Designed for 0.2mm layers. I used a 10x2.5mm…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Printing and using this bottle opener will significantly increase the chances of the Buffalo Bills winning the Super Bowl. Printed in PLA with two colors. Insert a penny to allow this tool to open bottles. It is press-fit Enjoy! Go Bills!!
3d model of JOSH HUTCHERSON WHISTLE MEME
Scroll down for the english translation… “JOSHUA” als druckbare LED- Namenslampe. Druckeinstellungen: Infill 8%, no Supports, 0.2 mm (Möglichst die Z-Naht so verstecken, dass sie an den Klebepunkten ist.) Ich arbeite in der Kinder- und…
caja joshi y toad, forma parte de una colección sobre cajas de Mario no olvides visitar mi perfil, también decir que las tapas a partir de 2mm puedes cambiar el color igual que hice yo saludos CUB SOCIOS:…
This is an attachment that can be mounted on a yard sign that was created from a picture of Josh Allen hurdling. Print two, one normally and one can mirror to fip it to the other side. Two connectors are used with some superglue to hold…
for mounting GPS receiver on quadcopter drone on the nose over the FPV camera FITS: Lumenier QAV-S 2 Sub250 Joshua Bardwell SE 3in frame link HGLRC M100_Mini GPS link MATERIALS: TPU 95A (optional) M3x6 or M3x8 screws (4 each) PRINTING…
print with PET-G or PLA with around 80% sparse infill also if you make a youtube video on this model I made please link the model in the description and comment a link to the video in the makes & comments p.s: i will feature ALL youtube…
⚔ ProjectXopen Series: Wall-Breaker Joshua Jos.06 (破壁巨刃-約書亞) This is a fully custom-engineered, high-performance Beyblade X compatible blade and ratchet system, independently developed by inoueting . Designed to challenge official defense…
Based off the concept art from Josh Kao I recommend scaling the sword down to 81% when printing. I made multiple handles but only #3 felt right when handling the whole sword. Use a glue that has a long set time so you can line up the…
As you might guess, I have a slatwall in my studio which my guitars live on. I was using some wire slatwall shelves for pedal storage until I had an epiphany. “I bet I could blatantly rip off Josh's JHS Pedals pedal wall and 3d print it –…
A small remix of one of the included headstocks from the Blend file
print with PET-G or PLA with around 80% sparse infill also if you make a youtube video on this model I made please link the model in the description and comment a link to the video in the makes & comments p.s: i will feature ALL youtube…
It's for G2 bionicle heads (okoto heads)
Book Markers Mark II, Sara, Nell, Monica, Michael, Maria, Lynn, Laura, Kim, Josh and Gerri.
Second Version of my Runcam Thumb Pro Baseplate for the Lumenier QAV-S Bardwell Edition FPV Frame I have to reprint mine so I make a few improvements. The Cam is more in the front. The Screw-Holes are tighter A Version with a mount for a…
Landing feet designed to specifically fit the JB QAV-S 2, 5" drone Printed with a Prusa MK3, I used 80% infill and M3x8mm screws. Other prints just didn't quite have enough wiggle room in the bolt pattern. These fit flawlessly! The TPU…
My 5-year-old grandson loves time in the shed, learning about stuff. Josh found it difficult to separate the stick of disc magnets he was playing with (under strict supervision) He said it was hard, so I suggested we build a tool to help…
Part of my National Parks Series of Lithophanes which I will be designing more of as time progresses. I will be donating 50% of the net tips, for this design, to The National Park Foundation (NPF). This lithophane simply slips onto a…
Lumenier QUV-S 2 Joshua Bardwell edition Gopro Hero 8 mount 22.5 degree ND filter compatible Printed in TPU
Joshua ISD string art best if printed at a 0.24 layer height with the wall generator in Arachne mode and overhangs on
This is a CADDX Peanut Support for the QAV-S Joshua Bardwell Edition Frame. I didn't do much design on this one, please be sure to check the sources and thank them :) Category: R/C Vehicles
hat coms off so turn on supports
This is a model i modded for Josh-3D's eurorack case which i kept as true to the original as i could. I only had to modify the mounting holes and add a small cut out on the back. These are mounts that let you attach to the side panels…
0.4 nozzle 0.2 layer high 2 walls 15% infill gyroid multi color
print at around 15% infill
Student design from Teen Maker Hour. Created using https://doodle3d.com/
The AI part... Not sure how long that will last. https://g.co/gemini/share/e933a16720b9 Printed flat at .16 res .4 noz K2 Plus - 2 hrs Picture: Josh.jpg Lithophane Resolution: 0.14 Colored Resolution: 0.8 Layer Height: 0.1 Width: 150…
print with PET-G or PLA with around 80% sparse infill also if you make a youtube video on this model I made please link the model in the description and comment a link to the video in the makes & comments p.s: i will feature ALL youtube…
This is a model i modded for Josh-3D's eurorack case which i kept as true to the original as i could. I only had to modify the mounting holes and add a small cut out on the back. These are mounts that let you attach to the side panels…
print with PET-G or PLA with around 80% sparse infill also if you make a youtube video on this model I made please link the model in the description and comment a link to the video in the makes & comments p.s: i will feature ALL youtube…
Landing feet designed to specifically fit the JB QAV-S 2, 5" drone Printed with a Prusa MK3, I used 80% infill and M3x8mm screws. Other prints just didn't quite have enough wiggle room in the bolt pattern. These fit flawlessly! The TPU…
I mostly enjoyed using Samsung's S-pen compatible Z Fold5 case, but it had a few downsides. After the top of the front case near the speaker cutout broke, I decided it was time for a new case, with some upsides! I present to you Josh's…
I made my own adjustments for a card tray to fit sleeved cards.I made my own adjustments for a card tray to fit sleeved cards. 3D Print Insert/Organizer for a game Blood Rage. Fits all the expansions. ATTENTION! This is just modified…
I used a fan chain, but other chains will work too. PLEASE say something if something went wrong and you have any advice
The AI part... Not sure how long that will last. https://g.co/gemini/share/e933a16720b9 Printed flat at .16 res .4 noz K2 Plus - 2 hrs Picture: Josh.jpg Lithophane Resolution: 0.14 Colored Resolution: 0.8 Layer Height: 0.1 Width: 150…
Made some rafter hooks, got caught up in ideas and options. Made for 2x4's. I print with 6 walls and 30% infill with PETG. Alter as you wish! They stack pretty well for multi print. The Outside and V2 inside i will redo so no supports are…
Super Fast Print In Place Fidget Spinner No assembly, no bearings, no waiting. Pop it off the build plate and start spinning. This is a print-in-place design engineered for maximum spin and zero friction. It’s a quick print that uses…
https://www.biblegateway.com/passage/?search=joshua+24%3A15&version=NIV Make sure to put in a filament change point. This is the magnet I use.…
This is a key tag with the name Josh on it. I hacked this out on Tinkercad for a friend of my son's as a demonstration of what a 3D printer is and how it works. Download this thing if your name is Josh, you're changing your identity and…
The front of the frame standoffs are narrower than the next spot back of standoffs which makes printing a little more difficult. Also the typical way of mounting the GoPro using the next standoffs is too far in my opinion. This design…
Remix of Josh-3d's stackable trays, 8-compartment tray
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 = Josh…
A replacement for the original cutlery drainer or to add an extra one to your Joshep Joshep dish drainer. Compatible with this model https://eu.josephjoseph.com/products/y-rack-dishrack-light-blue Need more accessories? Visit the…
caja mario bros y joshi , forma parte de una colección sobre cajas de Mario no olvides visitar mi perfil, también decir que las tapas a partir de 2mm puedes cambiar el color igual que hice yo saludos CUB SOCIOS:…
caja joshi mario bros, forma parte de una colección sobre cajas de Mario no olvides visitar mi perfil, también decir que las tapas a partir de 2mm puedes cambiar el color igual que hice yo saludos CUB SOCIOS:…
My first thing! Designed in TinkerCAD and edited in Prusaslicer, for all the Josh's out there who would like a fantasy style name plate. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: Doesn't Matter Supports: Yes…
Simple antenna mount for Lumenier QAV-S (Joshua Bardwell Edition) frame.
