Counting matching models…
A universal component for mounting power banks or other accessories using 3M VHB tape or Magsafe Magnetic rings. You can also design Velcro fastening openings based on this component. Download the .STEP file to create your own accessory.
Tip/Donate Remix from the awesome model from https://www.thingiverse.com/ssulti - Thank you! Added a small bracket/rail in the back to allow for the attaching of the HB1101 JSAUX dock. The rail is a tight fit, you may want to sand or trim…
This is the 3D Modeling ToolKit for JSAUX ModCase of ASUS ROG Ally X. You can design accessories for ModCase of ROG Ally X. The mount structure of Ally X one share the same design of Steam Deck one. So you can basically use the existing…
different style variations of your favorite justice society superheroes.
Einfacher Adapter für das Jsaux Modcase von Jsaux Ally zu Jsaux Ally X.
Cover für Asus Rog Ally JSAUX 6/1
The battery cover for my remote control snapped off. This includes both a .stl file for a replacement, and the .scad file used to generate it. This cover is a little more beefy than the original -- depending on what type of material you…
Just an improvement over V1, using 2 x NF-A6x15 5V PWM, a Noctua NA-FC1, included 5V usb cable, and a USB A to C converter:…
Just a small strap to help keep the JSAUX heatsink from shifting on the ROG Ally X, using the bottom fan screw mounts to hold it in place. It can be difficult to get the screws to bite, but any thinner and the mounts began to break. I…
Just a set of covers to hide most of the red of the LED PCB'S included in the JSAUX RGB Backplate for the ROG Ally X. I printed at 100% infill in PETG with a 0.4mm nozzle on an X1C. The printers scaling has been corrected with the…
Just an enclosure for converting JSAUX's ROG Ally X cooler to 2 x NF-A6x15 5V. I printed at 30% infill in PETG with a 0.4mm nozzle on an X1C.
Multibuild Multiboard Jsaux Nintendo Switch 2 Dock Mount Mounts a Jsaux 7-in-1 Nintendo Switch 2 dock (HB0704) under your desk or to the wall Mounts to Multiboard or Multigrid using a 13mm Small thread bolt No supports needed Works well…
🇬🇧 English version JSAUX Steam Deck Case – Kickstand Module (by SkTx) A custom modular kickstand design, made specifically for the JSAUX case for Steam Deck. This model is intended as a replacement for the original JSAUX kickstand…
different style variations of your favorite justice society superheroes.
Several related models are included, designed specifically for use with the JSAUX Modcase. I'm using the Steam Deck version, so I don't have 100% confidence all of these models will work with other versions of the Modcase. Model…
Magsafe holder for under your monitor. Magsafe used was a Jsaux Magsafe Charger link below. JSAUX Magnetic Wireless Charger for iPhone 17 MagSafe Charger, Magnetic Charger for iPhone 17 Air Pro Max/16/15/14/13/12/Airpods, Aluminum Alloy,…
Specifically this was designed to used with the model on makerworld here: https://makerworld.com/en/models/2628591-improved-jsaux-adapter-for-msi-claw-sillicone-case (also by me but it's a remix of a model only found on makerworld so I…
This is the 3D Modeling ToolKit for JSAUX ModCase of ASUS ROG Ally X. You can design accessories for ModCase of ROG Ally X. The mount structure of Ally X one share the same design of Steam Deck one. So you can basically use the existing…
This cover is designed to fit over the body of a DEJSA lamp. I created it after accidentally tripping over the lamp, which caused the body to partially break. It slides perfectly over the lamp's body and can be used to change the colour…
Printed this excellent stand to allow for desktop like gaming on my SteamDeck. A few small modifications were required for the JSAUX ModCase and my ZSUS 14" 2k monitor. Printed in ESUN PLA+, 4 wall loops, 15% gyroid infill.
This is the official 3D Modeling ToolKit for the JSAUX ModCase for ASUS ROG Ally（PC0119） . With this toolkit, you can easily design custom accessories for the ModCase, unleashing your creativity. Download the STL files to start 3D…
This stand is created for the to fit under my MacBook stand… test no supports needed
the Universal Bracket is Jsaux Mod case files edited to accept a spiggot into the top side, the vent is my creation and the cable relief works pretty well on a 5-6~mm cable.
Made to fit this USB hub: https://www.aliexpress.com/item/1005008054068671.html?spm=a2g0o.order_list.order_list_main.41.7c091802AWyCrw You need a JSAUX modcase for this to work! Printed in ASA+, but PETG should work fine, maybe even PLA…
This phone mount is made for people who have the JSAUX grip/case on their steam deck and use a phone that is magsafe compatible. I printed it on its side, and you'll need support. To finish the project, you'll need a specific magsafe ring…
This mount is designed to accept the JSAUX MagSafe charger, pressure fit, so that I could mount it on the top of my bed's headboard. It is a VERY snug fit, probably depending on the printers' specifications, but it took a good amount of…
My Steam Deck OLED couldn't fit in the other snap in place dock because of my JSAUX Mod Case. The kickstand was getting in the way and it would sit kind of in there but would be crooked and overall just didn't seem secure- so I edited the…
The world’s most versatile mounting solution for portable gaming Check out more files for download under my profile here: https://www.printables.com/@get_mechanism Want a stronger/more official solution? We also offer injection molded…
a simple print to neatly attach your stock steam deck charger to the back of a Jsaux Mod case. originally designed with the UK plug in mind however it will probably work with all plug types. NEEDS SUPPORTS - see pictures.
Hanger for IKEA REJSA box Hanger for IKEA REJSA box, very useful for your kallax shelf and ikea rejsa box Enjoy it!!
This is my upgraded stand for the JSAUX ModCase, designed primarily to solve the problem of the original kickstand becoming loose over time. It features a mechanical locking mechanism with a spring, providing a distinct, tactile "click"…
🇬🇧 English version JSAUX Steam Deck Case – Kickstand Module (by SkTx) A custom modular kickstand design, made specifically for the JSAUX case for Steam Deck. This model is intended as a replacement for the original JSAUX kickstand…
Wanted to get my partner a lapdesk that holds their Steam Deck, specifically with the Jsaux ModCase. Other options out there didn't perfectly fit their usage which was able to hold their Steam Deck and didn't block the Steam Decks exhaust…
This adapter converts the proprietary JSAUX Modcase “strap” adapter to a more universal Low-Profile NATO rail. Designed to facilitate easy connect/disconnect. it includes cuts to support the Smallrig ‘Hawklock’ system. Consider the…
Hi it's EddieCoast with SteamDeckChop, you're going to be in a great mood all day! There are a lot of good docks / cradles / holders / display stands for the Steam Deck out there, but almost none that accomodate the JSAUX ModCase (PC0104…
The JSAUX ModCase is great for protecting the Steam Deck on the go but when the Deck is in use or docked, the cover is annoying to have laying around. I created a very basic bracket the protective cover can mount to in a similar fashion…
Adapter for the JSAUX steam deck mod case to house an Anker 7-in-1 USB C hub on the back. Part files are found on my github and can be accessed here: https://github.com/Kaisano/AnkerHub_JSAUX_Adapter
This is just a longer version of the https://www.printables.com/model/1201712-steam-deck-phone-mount-for-jsaux-case model. It should still work with the same magsafe puck. I also added a version that has an additional jsaux mount point on…
Several related models are included, designed specifically for use with the JSAUX Modcase. I'm using the Steam Deck version, so I don't have 100% confidence all of these models will work with other versions of the Modcase. Model…
Magsafe holder for under your monitor. Magsafe used was a Jsaux Magsafe Charger link below. JSAUX Magnetic Wireless Charger for iPhone 17 MagSafe Charger, Magnetic Charger for iPhone 17 Air Pro Max/16/15/14/13/12/Airpods, Aluminum Alloy,…
Specifically this was designed to used with the model on makerworld here: https://makerworld.com/en/models/2628591-improved-jsaux-adapter-for-msi-claw-sillicone-case (also by me but it's a remix of a model only found on makerworld so I…
Aesthetically, mounting my switch 2 horizontally didn't work for me, and I wanted to mount it vertical. Added a small blockage at the end of the mount, allowing for safe mounting of the switch 2 and other Modcase devices.
I wanted a stand for the charging puck I have. Maybe someone else could use it. Supports not needed, prints fine without. The puck isn't held super tightly, so I use a finger to push the phone off sideways. Any smaller and I don't think…
I have the JSAUX 6-in-1 Multifunctional Docking Station (HB0609), and it works well, but my Steam Deck is prone to tipping on the included plastic stand. I designed a wider, more stable version that holds both the console and the dock…
This accessory has not been tested as I do not own the JSAUX case, but was requested by a fellow Printables user. Please post a make confirming if it does or doesn't work. This mount allows you to attach two Mechanism accessories to your…
Logo for www.rejsa.nu https://rejsa.nu/forum/viewtopic.php?t=58040 Category: Automotive
RejsaCAN RejsaCAN is a 3x5 centimeter small ESP32 based board aimed at car use that I put together for my own use in my assorted crazy car projects. The board has an on board CAN interface and can be powered directly from the car (5-15V).…
This model is for two clips to be printed on both sides of the JSAUX HB0603 SteamDeck dock to increase the height of the Steamdeck. The existing design of the JSAUX HB0603(and earlier models) prevents airflow from about 25%-30% of the air…
A mod for the Steam deck JSAUX Mod case for storing micro cards. Can hold up to 12 SD cards.
The “SteamCooler” is here to save the day (or temps) In combination with the JSAUX transparent back shell and a non destructive thermal mod this cooler actually delivers cooling performance unlike those magnetic attached phone cooler who…
An adapter to use deckmate accessories with the JSAUX ModCase
Three card MicroSD holder that fits nicely between the mounts for the JSAUX Modcase Steam Deck case. When the kickstand is installed, the holder is completely covered. In the pics above, I've just affixed it with some double-sided tape.…
The OC cooler in combination with a non destructive Thermal Mod + JSAUX backplate will keep the temps on your overclocked Steam Deck under control giving you enough headroom to not worry about stressing your device with to much heat on…
I resized the Hard Drive mount for the Jsaux ModCase because the official one from Jsaux is too small You can find Jsaux files here https://jsaux.com/blogs/steam-deck/free-printing-toolkit-for-modcase-adapters
Adam Ijaz hates you. Dbrand made an adapter for the Steam Deck Dock but didn't make it for the--let's face it--far more common JSAUX dock most of us purchased before the official adapter came out. Thankfully, one of Dbrand's minions took…
I recommend printing it with the back flat on the build plate and using support unless your printer is really good at bridging, there is a 75mm gap that would need to be bridged.
I made a powerbank holder for jsaux powerbank that included in mod case power bank kit. 10% infill with 3 wall On .2 layer.
A slide-on attachment for the JSAUX Steam Deck ModCase that holds an Apple AirTag. It slides onto the ModCase's included strap attachment's base (remove the rubber straps first, of course). It's thin enough that the Steam Deck doesn't lie…
This is a collection of models related to the JSAUX Modcase for the Steam Deck. Their intended use is to be imported into a CAD project, so you can build compatible accessories around them <3. JSAUX has released an official set of models…
This uses the base of another model, but adjusted to add a small mount for jsaux mod case attachments. I made this one a bit longer than the mod case to use for a clone hero guitar attachment model. I may come back and shorten it so it…
I have revised this great model due to the fact that I didnt like the original fitment onto the Modcase itself. I printed with prusament PETG 6 walls, 15% infill.
Here is a universal mount for a Jsaux Mod case, can be used to mount a power bank, external ssd etc. I just use double sided tape and it works great! I recommend at least 6 walls and 15% infill. Petg is recommended.
First attempt at using FreeCAD to edit/combine parts found online, so it's not the prettiest thing ever. Sorry. This piece changes the orientation of the Jsaux Mod Case Strap Attachment from horizontal to vertical. Needed this because all…
There are 6 parts of 3D printing drawings Jsaux provide 1. A Deckmate adapter, after using this part you will be able to use Deckmate accessories on the ModCase system. 2. An Hard drive adapter with its own adapter to replace the ModCase…
After designing and using both of my existing non destructive cooler designs for the the Jsaux Backplate on my Steam deck I found the following conspicuity's: 1.) I pretty much use the big cooler (…
WARNING! THIS mod reroutes the air intake directly above the decks internal fan, this means that the air normally being pulled in by the lower vents will be greatly reduced!! You either have to make use of the Aluminum plate ( heatsink)…
Divider for Ikea Rejsa boxes. After removing the top of the box you can insert the box works well to organize desks and workshops !!
Lots of new features added compared to the original V1 model, including: 1.) A full size heatsink ( no need to get rid of some finstacks to lower the fan into it) 2.) A bigger 40x40x10 noctua fan, 3.) Docked turbo mode ( utilizes 5 volt…
My Jsaux modcase's stand became sad and loose, and I haven't even had it for a year, so I scoured Printables for the files I needed to combine, and voila! A replacement stand!
Inspired by JSAUX Modcase Vertical-Orientation Adapter by Sabrina. This was exactly what I was looking for, but Sabrina's design needs to be cleaned up, and the creator hasn't uploaded any CAD file, only an STL. So, I decided to design…
My version of the JSAUX ModCase has 3 plastic tabs on each side for the stand mount so the original version of this does not fit. My guess is that i have a newer revison of the ModCase that made the original design not fit. so i made a…
I did not like the mounting option that came with my JSAUX ModCase. I made this which can attach anything sucrely from any side using 15mm velcro straps trough the integrated holdes that are all around the model. This feels way more…
This design is intended to be a drill jig for the Steam Deck Jsaux Modcase front cover in order to allow airflow while the front cover is on. In my case, it's for use with an external display, so i don't have the internal display exposed…
I use the JSAUX modcase on my Steam Deck daily but one issue I immediately identified was the lack of protection against foreign objects damaging the charge port and/or accidentally turning on the unit in my backpack. There are three…
The deck goes in my backpack daily. Most everything else that travels in the backpack gets lint and dust in the cracks and openings. I didn't want that to happen to my deck so i made these covers. **** WARNING: Not removing/opening the…
its just a wall mount with the valve logo on it. simple and effective.
A mount that works with the Jsaux modecase to hang your Steamdeck on your Skadis pegboard.
The Wall Mount for the Steam Deck ModCase is designed to securely hold your Steam Deck on any wall surface. It provides a sleek and space-saving solution, keeping your device easily accessible and off your desk. The mount is sturdy, easy…
A Deckmate compatible adapter for mounting Deckmate accessories onto the ModCase. Download the .STEP file to create your own accessory.
A replacement component for the universal kickstand to replace the original kickstand on the ModCase. Mounting a hard drive is just one option; the hard drive or other accessories can be fixed using 3M VHB tape or Magsafe Magnetic rings.…
A TF card / microSD card storage slot to store your Steam Deck games, giving you more games on the go. Download the .STEP file to create your own accessory.
A VESA Mount Adapter for securing the Steam Deck to a VESA Mount. Download the .STEP file to create your own accessory.
Say hello to our latest HB0609! The HB0609 will be shipped together with a DOCK BASE compatible with ROG Ally X, ROG Ally, Steam Deck, Steam Deck OLED, and Legion Go handhelds. The HB0609 features a replaceable acrylic sheet where you can…
Three Options Available! *Simple: A modified version of the official HB0609 "slide" part, intended to help mount the HB0609 to the back of the JSAUX Modcase. *Extended: The modified “slide” plus a vertically oriented ‘ModCase’ connector.…
Simple design. No supports required. Print it face down. Everything is press fit. Link to JSAUX Charger: https://www.amazon.de/gp/product/B0B6ZK81WH/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
Simple JSAUX ModCase attachment that I made to attach my external SSD to. Use some velcro to secure things to the back. *Tested and worked with a 0.4mm nozzle and 0.4mm layer height print
