163 models
Gidday Andrew, Thankyou for providing the back of the mask. I did my best and got all the way to revision 17 of my test trials before I was finally satisfied I'd done all I could do to get it to look remotely close to having been…
utilize original buttons and screws from factory key fob. perimeters 6 100% infill supports - build plate only rev4 -change shape to improve print quality (print with exterior side facing up) rev3 -stiffness increased by ~43% to help the…
This is my interpretation in Gauge 1 (1:32) of the DE1 railcar designed by Allan (Rotterdam) for the “Nederlandse Spoorwegen” in ‘50’s. https://en.wikipedia.org/wiki/Blue_Angel_(train) https://nl.wikipedia.org/wiki/Blauwe_Engel These…
Update 25 October 2025: I have uploaded a step file of the standard back plate for your adjustments and ideas. Since the adhesive version of the back plates of the Xiaomi Aqara temperature / humidity / pressure or vibration sensors…
In the '50's the Dutch Postal Services and the Dutch Railways placed a large order for "Plan C" rolling stock. Besides several series of carriages and streamlined multiple units, 10 coaches to transport mail were ordered.…
Classic Playcards deck of 54 with options CARDS Standard 52-card pack, ranking AKQJT98765432 + joker Diamonds Hearts Clups Spades 2 3 4 5 6 7 8 9 10 Jack Queen King Ace Joker Use your cards wherever you want since they are waterproof when…
In the 1930's the Nederlandse Spoorwegen ordered 4-door bagage wagons DIV. Because of the new, welded steel construction they were nicknamed "Stalen D" (steel "D'). Initially they were deployed within the Netherlands, only just crossing…
Huge shout out to @szech713 for the original design and including step files! *** All v2 Models are the newer version that has a slot for the RFID chip as well as a better battery holder.*** I always hated the incredibly large key fob…
Custom chassis rails designed for scx24 . all mounting holes are slotted to allow fully customizable set up and tuning
N scale Catenary based off the type NJ Transit uses to replace damaged legacy poles along some of their lines. This particular one is based on Photos of one in Peapack NJ. Depending on preference it can be printed either parted out or as…
Saint Nicholas Mitre / Sinterklaas mijter 3D model voor sinterklaasfeest. The Saint Nicholas Mitre (mijter van Sinterklaas, Mitre de Saint-Nicolas, Mitra Świętego Mikołaja, Mitra Svatého Mikuláše, Szent Miklós püspöksüveg, Mitra di San…
You'll need: 6x Hex-Nut 3mm 6x M3x12mm Screw
Effortlessly organize your kitchen with the Spice Jar Holder (IKEA RAJTAN), a storage solution designed fully compatible with Catch-All Trays of height 2. Print three holders—left, middle, and right—to create a 100x200mm block that fits…
This is a Rack for use with IKEA Rajtan bottles for spices. The hole in the middle is used for M3 threaded rod - thats horizontal fix. Vertical fix is achieved by M3 Nut and M3x6 or M3x8 screw. You can stack them vertically and…
ER2 mods: Spyder threaded barrel adapter (not currently 100% compatible with all barrels), Buffer tube and mounts for AR style milspec butt stocks, new larger pump handle with integrated weaver rail, and a clamping feed neck. I also made…
This card adapter is compatible with the JTEE3D Super Thin Apple AirTag available on my website and Etsy . The Slim AirTag can clip in to this card adapter with a bit of force. If you don't have a 3D printer, you can also purchase this…
I have runed this boat with 2205 brushless motor and 2 x 18650 lion and was fast as hell. To build this awesome boat check the original link below https://cults3d.com/en/3d-model/game/rc-mini-jet-boat
Designed to fit the RAJTAN spice jar. Height: 263 mm (fits the MK2/3 heatbed if oriented diagonally) Width: 64 mm Depth: 70 mm If you have more than 3 rajtan jars, print more of these and put one next to another.
The default height of 35mm is designed to fit directly above a Arturia Keystep (see pictures).
Holds 4 Ikea RAJTAN Spice Jars securely slightly tilted backward to not slip out. print so mounting hole is down on the bed use 3-5 perimeters no supports required…
You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL Jednoduchá cedulka na schránku
Habe den Schraubbaren Aufsatz, neu überarbeitet. Für das Ikea RAJTAN Gewürzglas. Schraubaufsatz jetzt mit Rändel und neuem Gewinde. Have the screwable attachment, reworked. For the Ikea RAJTAN spice jar. Screw attachment now with knurl…
I wanted to print descriptions on my Ikea Rajtan Spice pots. So I put together a blank lid, to which you can add some text (I added the SKP file so you can edit it in Sketchup to add your text). If you don't want any text, print it face…
Spice Rack for IKEA RAJTAN This 3D-printed spice rack is specifically designed for IKEA RAJTAN spice jars, ensuring practical and organized storage in the kitchen. The rack allows efficient use of space and is intended for mounting under…
JTS Airacuda max barrel weaver airgun
A two-part housing for a Jtron battery isolator switch . The design has openings on both sides and allows direct insertion into the battery cable. 4 screws M4x16 needed to mount top to bottom. Mount to a baseplate with two screws on the…
cedule na které je napsáno: NEVHAZUJTE REKLAMU
Tisk na dvě poloviny, podpěry, výplň 10%, tryska 0,4, PLA.
We have been using IKEA Rajtan spice jars in our kitchen for some time, but they've lately moved to a wide drawer where they rattle around and get disorganized. These interlocking tiles fit the drawer and keep everything in place. The…
Tossed together a b style standoff for my lancool since i snapped two off while cleaning my computer, then snapped off another seeing just how brittle they were x) Printed standing upright with and without supports... and supports on base…
Creality CR 10 mini Cura 5.1.0 Print Quality 0.2 Nozzle 0.6 PrimaSelect PLA Red
Several lids broke on my Ikea Rajtan set so i designed replacement, then i experimented with adding few holes in the lid.
Remix from @sterinli27 s Edge Bracket for “free” under desk mount. So this is a symmetrical version. Printed in ABS black on an BambuLab X1 Carbon
Small transistor keychain charm. Learning fusion 360, so this was used for practice. Just a little nick-nack I tossed on my keychain + car mirror.
I don't have a 3D printer myself! If you print this, please post a 'Make' with a photo. I'd love to see how it turned out!" Instead of using plain, flat surfaces throughout the design, I incorporated a honeycomb texture to add more visual…
I used the free SolidWorks demo time to remix this and adjusted the diameters of the central part that holds the spring and the two ears that stick out into the slots on the valve body and slot into the index point of the valve holder,…
Contains an option for attaching to the top shelf (16mm) and double-sided tape. Parametric model, you can change the number of stacks.
The Jtron Battery Isolator has a removable switch handle which can easily be lost. The switch is used e.g. on the TowFLEXX aircraft tug. This is the 3D model to print a spare handle. Organic Supports and colour change for the embossed…
It's lid for rajtan-like jar in few different versions. I used one with “PET” embossed and with oring. Long time ago, before Ikea era in my country, I bought jars for spices. Some time after I bought second bath of jars and recently I…
Bracket for hanging the Aqara shock sensor on the door handle. This allows the alarm system to be extended to indicate that someone has grabbed the handle or that the door has been opened. The model is made in Fusion 360 and is…
A basic case for the jtagulator Hardware: 3x m3x8 bolts 3x m3 washers 3x m3 heat inserts (3mm long ones)
Modular spice rack for Ikea Rajtan containers, need to be assembled with superglue. Gives uniform 3mm walls in all directions no matter how big you make the spice rack.
Summary Tapón para deposito de agua limpiaparabrisas alfa romeo 147 JTD Alfa Romeo 147 JTD Scheibenwaschwassertankdeckel Print Settings Printer: Custon Rafts: No Supports: No Resolution: 0.20 Infill: 100 Filament brand: basic Filament…
Modular side circles for protogens! I like to call them cookies! these allow you to service them and work really well. They require 2x M3x5 (ISO-7380) and 2xruthex style m3x6 heat set inserts. The LED rings are pretty standard WS2812B…
Skejtoletadlo / Aircraft skateboard
This is a custom laser cutter/engraver mount for the Quiet Spindle Holder in the X-Carve CNC Machine. The laser head is built by JTechPhotonics. I use the 3.8 watt Version, but any head should fit (as of Sept/2017). The mounting holes for…
This is a custom laser cutter/engraver mount for the Dewalt Spindle Holder in the X-Carve CNC Machine. The laser head is built by JTechPhotonics. I use the 3.8 watt Version, but any head should fit (as of Sept/2017). This will mount your…
Modular display/storage system for the Ikea Rajtan jars. Requires only one screw at the top and additional shelves can be added to the bottom to increase the number of jars displayed
This was created to keep children (specifically with disabilities) from disconnecting the tubes or opening the flush valve during feeding. The lid is designed to be difficult to remove for a child but possible for an adult.
JTS Airacuda Magazine Organizer. This holds 22 caliber magazines. The tray nests in the lid when shooting.
The Jejtaj is a weapon wielded like a pair of brass knuckles. However, with enough practice, one can parry bladed attacks. (Sorry NOT alot of info on this Klingon Battle Blade)
My first work. I used and remixed Ceiling Rose Canopy Abzweig-Baldachin Big/Groß by Jeans84 (https://www.printables.com/model/1184814-ceiling-rose-canopy-abzweig-baldachin-biggross). I also used standard E27 construction sockets. The Lego…
Adds holes for a magnet and the two pass through bolts for the Jtech 7w Laser with the magnetic mount. Lets you easily clip the laser on and off with the magnets without removing the spindle. You will need 4 8x3mm magnets…
clutch centering tool 1.9 jtd 8v engines
You'll need to remove the plasic bits from the pins to get them trough the holes and then reattach them
This is a custom laser cutter/engraver mount for the Dewalt Spindle Holder in the X-Carve CNC Machine. The laser head is built by JTechPhotonics. I use the 3.8 watt Version, but any head should fit (as of Sept/2017). This will mount your…
You can put 7 of the holders horizontally plus and left end piece to fill the width of the Maximera kitchen drawers. I've made a universal version that holds several other jars, plus 3 universal double-sized versions. To avoid movement…
Policajt pro chytání na položenou, boilies. Možnost přidělat na prut a nahazovat s ním. Jedná se o pomůcku pro lov na položenou a nemusíte ji při každém náhozu a vzdolávání dávat dolů, jen ji nacvaknete na prut. Nastavení tisku a fotky…
De kunst van het schijten is a creepy figure sitting on a toilet in low poly....
Protects MSXBOOK/OneChipBook's front JTAG port from the dust.
Single part jar holder for the Ikea rajtan, should be able to be printed without supports or brims on most printers. Designed to be epoxied to a back board.
Allows you to shorten your speaker by the hight of the middle part to place it on a sideboard or similar.
I wanted to turn my analog headphones into bluetooth ones for when my other bluetooth headphones needed to charge. Its goofy looking but very comfortable. Feel free to remix. You can also use just the top part as a starter point for your…
This is a spice rack modeled specifically for use with the IKEA Rajtan glass jars. Each hexagon has a locking system that slots into each other to form a sturdy structure. It also has a small bump at the bottom that fits with the under…
Laser cross hair mount for a Tajima neo C1501. There is nothing model/brand specific abut this other than the geometry This is constructed with... typical laser pointer with a cross pattern 12mm(you need to find a way to power it)…
This is a little device I made to help find the center point of a JTech laser. It also should have the approximate 3" standoff between the cut material. Check out the video I have talking about how it works: https://youtu.be/op-MNw-HkwM
-Printed on a Bambu Lab P1S with PLA Basic and standard .2 layer setting on .4 nozzle. -Auto oriented with support only needed on counter bored hole -Print 2 Slider Nuts -Hardware Required: 6mm x 4mm magnets (4 total) M5 .8 x 12mm Button…
Got some pro-comp used wheels, with only one cap present, decided to make my own design, based on Volk Rays Nut cap I had lying around. original pro comp part no: 8327041 / 7327042 "Wheel Center Cap, Chrome, Universal Cap, Push-Thru, 3.27…
Print arm and arm cap from something solid. I used PETG. Print strap from TPU. Disable top and bottom from the middle part. Change infill to something you like. Installation instructions: -Remove yokes from the headband and slide arms on…
Gridfinity with magnets, holder for jacobs chuck JT33, with chuck key
Pletací háky z ukončením, ve tvaru koťátek
Disclaimer: Laws regarding airgun shrouds and moderators vary by country and/or local jurisdiction. Although it is legal in a lot of areas, make sure to check if it is legal before printing. This is not easily adaptable for any firearms…
This mounts the JTech Dual Pro 14W 445nm laser head to a Carbide3d ShapeOko router spindle. The existing mount is 3d printed. This will require similar magnets and pins as the existing mount, but will give you more adjustment, increase…
This 3D printed JTAG tool is designed to accommodate Dupont wires, providing a compact and ergonomic solution for various electronics and programming tasks. The model is perfect for hobbyists and professionals alike, facilitating…
Militärisches Symbol zur Verwendung in Ausbildung/ Befehlsausgabe
Print met de buik van de bij op de plaat. Print met support
Looking for a practical and stylish solution for your Ikea Rajtan spice jars? This 3D model allows you to print the perfect replacement or addition to the original lids. Create your own color combinations and customize the look of your…
A simple 30.5mm diameter hole with a 1mm bevel in a 1x1 Gridfinity Refined block.. suitable for a hole load of uses, but designed to hold a standard superglue bottle or a JT16 glue stick. I kept it a fairly loose fit so there was no…
Screws right on, like the original lid. The model itself does not contain the sieve part. This is added in the slicer via a cylinder and infill only (and maybe an outer wall if you like). The 3mf file contains all that. That cylinder has…
I needed a rack mount solution for my jtz map02 mini pc so I came up with this. I used the JetKVM mount from JaredC01 but the rest was done by this redneck... so please be nice. Feel free to remix this and see what else it can be used with.
ALL FUTURE MODELS WILL BE SHARED HERE: https://cults3d.com/en/users/antirice/3d-models I didn't find any holders for JTS AK 12ga mags that would attach to the Honeycomb Storage Wall, so I made my own! Printer: FLSUN V400 Filament: Duramic…
This 3D printable keychain features the letters JT, making it a stylish and personalized accessory for your keys. It's designed to be both durable and lightweight, ensuring it can withstand daily use while adding a unique touch to your…
Tištěno se strunou PET-G.
Made an adapter for the Panasonic GH6 to put it in my JTZ DP30-Cage. Tight fit and saving money and letting me test again some construction-abilities
Printing Instructions: Material: PLA Infill: 100% Layer Height: 0.2mm Supports: No Rafts: No Brim: No Color change at 1 mm or 6 layers. Slovak version. Happy printing!
Cedule "Nevhazujte letáky" k nalepení na schránku. Její přítomnost obvykle výrazně snižuje množství letáků nacpaných do schránky. Pro správný vzhled je nutné přidat do poloviny tisku změnu filamentu. Prusa-slicer umí toto detekovat a po…
Description I like to spend time with my friends connected online. Mostly when I'm checking the printing. The idea of this remote controlled pourer I had for many years in my head. It's much better feeling when I don't pour the shot by…
Designed a plastic shelf cap to support a radio on top of a Jetstream JTPS32MAB Power Supply. Printed it with PLA, and it has held up fine so far.
Gridfinity holder for the Arrow Fastener JT27 stapler with room for 1 box of staples. Buy me a coffee
The Teknic ClearCore motion controller has a JTAG debug port on the PCB, but it isn't accessible without removing the cover. This replacement cover has an opening for the debugging cable to attach without leaving the entire board exposed.…
Tento model se tiskne naležato aby bylo použito co nejméně podpěr. Používal jsem vrstvu 0,12mm. Perimetr jsem nastavil na 3.
Eine Reparatur Schiene für den unteren Lufteinlass zum Ladeluftkühler. Die Gummilippe steht unter dem Unterbodenschutz über und geht gerne kaputt. Mit dieser Schiene und ein paar 3mm Nieten ist alles wieder schick.
Printing Instructions: Material: PLA Infill: 100% Layer Height: 0.2mm Supports: No Rafts: No Brim: No Color change at 1 mm or 6 layers. English version. Happy printing!
This is a material storage organizer for the small vacuum former JT-18 and JG-08 (both small dental vaccum formers). The Inner dimension of the container is 130 x 130 mm that fit the material size used for these vacuum formers (Material…
Keserű pitbull 19m-re, avagy Szuperpitbullra készült fénygyűjtős első célgömb, illetve hozzá illő hátsó nézőke. Bármiféle átalakítás nélkül felragaszthatók a fegyverre. Javasolt pillanatragasztóval rögzíteni, mert ha esetleg le szeretnénk…
The original JTech laser mount for the Shapeoko3 is convenient but reduces the X-axis and can wiggle on direction changes. This model allows the laser to mount in the router clamp and is more rigid. The trade-off is not having a magnetic…
Tato cedulka byla originálně určená na hromadnou školní akci.
As someone who loves using the JT-TC66C voltage meter regularly, it quickly became one of my favorite tools. It's incredibly handy to take everywhere, but I noticed that my greasy fingers would often make it dirty, and the electronics…
