21 models
A buddy of mine bought some USB buck converter boards and was going to make an adapter cable and I had the idea of this box instead. It has one set of power poles in and 2 sets out, and then USB to power a PI, what have you. This box is…
No Support needed Recommended Print Settings Material: PLA or PLA+ Nozzle: 0.4 mm Layer Height: 0.2 mm Wall Line Count: 2–3 Infill: 10–15% (Gyroid or Grid)
The IP5328P can be installed facing up or upside down (see "ud" in the filename), which makes it slightly smaller. The version with the IP5328P facing upwards is easier to install overall, but please note the picture showing the cable…
Here is the JuiceBox 2.0, it now has a USB C & A buck converter in it. It is still 1 PowerPole input and 2 PowerPole output. Here is the link to the buck converter used: https://www.amazon.com/dp/B09D98799T I printed mine in Orange ASA to…
Ich habe 3x40 mm Stifte genommen zum Sichern, einfach nach dem Hereinstecken leicht herunterziehen und es hält. Zum Herausnehmen und tauschen einfach rauf drücken, Stifte raus und wieder einhängen, und sichern. Gedruckt mit Carbon PLA…
Holds a juice box ~40x48mm, common size in Sweden (probably not just here). Good snug fit. Holds it in really well, even upside down. Edit: v2 - Small changes to handles and outer corners.
Full description and build instructions available on https://github.com/Devnol/Juicebox
Open the carton, hand it to the child, and in their excitement they squeeze it everywhere! This was designed to solve this exact problem, and neatly makes a portable unit with space for an attached metal straw - much longer lasting than…
This model is entirely my own design, but obviously heavily inspired by the original from Thump2010. The model is just a plain, unlabeled box. I added my callsign in the slicer. Main difference is the use of a different buck/boost…
Wider version of https://www.printables.com/model/891659-juicebox-holder Changelog: 2024-08-07 - Redesigned handles
I'd be surprised if anyone downloads this one :D Takes 8x3mm magnets.
Made a holder to hold my Juicebox charger with the Tesla charge adaptor connected to it so I can hang it from the wall without removing the Tesla adaptor. Recommended 0.2mm layer, 6 walls, 25% infill, PETG
The are some terminal covers for the 12V in side of the Lone Peak Juicebox camper electrical system. Print with TPU and they should be flexible enough to friction fit on the terminals.
Juice box holder / Saftkisten Ständer a stable and sturdy holder to keep the juicebox high enough to properly fit a glas below without placing it at the counter top's edge. Juice box ist placed slightly tilted to ensure proper flow.…
This is a thicc juicebox you could print.
This is JuiceBox , a robot from the game Crashlands that help Flux with advices, crafting recipes and also as a sidekick cargo pallet. I model this character to 3D print as multiparts, so you can make it at your time and also test some…
JuiceBox Ständer mit Abtropfschale – modular & magnetisch Entstanden für die PRINTED Hub 2026 Dieser Ständer ist ursprünglich für die PRINTED Hub 2026 in Rüdesheim am Rhein entstanden. Dort hat er sich im Einsatz bewährt, und jetzt gibt's…
🇬🇧 English version below 🇩🇪 Deutsch Schluss mit klebrigen Sirupflecken auf der Arbeitsplatte! 🍓💧 Diese Tropfschale kommt einfach unter den Spenderkarton Deiner Juicebox, dem Sirupspender, mit dem Du Dein Wasser mit Geschmack aufpeppst.…
No Support needed Recommended Print Settings Material: PLA or PLA+ Nozzle: 0.4 mm Layer Height: 0.2 mm Wall Line Count: 2–3 Infill: 10–15% (Gyroid or Grid)
This model is entirely my own design, but obviously heavily inspired by the original from Thump2010. The model is just a plain, unlabeled box. I added my callsign in the slicer. Main difference is the use of a different buck/boost…
A buddy of mine bought some USB buck converter boards and was going to make an adapter cable and I had the idea of this box instead. It has one set of power poles in and 2 sets out, and then USB to power a PI, what have you. This box is…
