Counting matching models…
This is a repair Kit for Braun “Universalschüssel” fitting the machines K850 K1000 K3000 3210. To remove the broken part you can drill a small hole in its center and punch it out with a nail. To press in the new part, i added two parts…
An der Rührschüssel der Braun Küchenmaschine K3000 gibt es einen oberen und unteren Mitnehmer. Wenn diese reißen, funktioniert der Antrieb nicht mehr. Ersatzteile sind leider nicht mehr erhältlich. Hier ist der obere Mitnehmer, den…
Update (2026/07/01) - V3: I adjusted the V2 model to reduce the width of the screw holes so that the deeper portion of the model is continous. I had a print failure recently where the print split on the thinner portion. The screw hole is…
As the original hopper was to big to fit under the kitchen cabinet, I designed that one which is more inline with my daily consumption anyway ;)
This is a short hopper with lid for a Mahlkonig K30 Vario grinder. I could never fit the OEM hoppers under my cabinets and had to use an acrylic tube for years. Now I've finally been able to print my own ideal hopper. Works great! Still…
Horizontal Storage for DIN2080 SK30 Tools This item lets you store SK30 DIN2080 tool holders horizontally in drawers. It fits the Hoffmann GridLine rubber drawer liner to prevent it from shifting. Printing recommendations: PLA, enforce…
This tool allows you to keep your machine's taper clean. Just add some 2mm felt stripes to the cone so you can wipe the inside of your machine spindles clean.
WIP - the handle is maybe 0.2mm too long over it's entire length, and there's not enough margin on the “boltway” parts: I cracked my handle slightly while putting them in. But it fit on line, so I probably will not fix this model, unless…
Din-Rail mountable holder for BT30/SK30 tools.
Simply just replacement legs for the Corsair Raptor K30 keyboard. Designed to be printed at 0.2mm LH with extremely minimal and easily removed support under the lugs.
Printed in PLA 0.2mm Layer hight 25% Infill Mount with a M6x25 Screw
This is a toe clip adapter or mounting bracket that replaces the front reflectors on Rockbros K307PT Mountain Bike pedals, making it possible to install toe clips. It is durable and fits well. However, it does require you to drill two…
Air duct models for connecting PWK carburetors to the Dnepr OHV engine (650 cm³). Fits with the original gearbox (with reverse) and K750-style chimney. This setup removes the original pipes and choke system, with no need for a new one. It…
Sennheiser EK3041/EK3241 QuadPack holder for Zoom F8 Porta Brace AR-Z8
CHEVROLET SIERRA, K30 ATTACHING THE DOOR PANEL Türverkleidungsbefestigung Chevrolet K30, Sierra usw. Gedruckt habe ich die Teile 6 sind erforderlich mit PETG I printed The Parts 6 are required with PETG 100% infill 0,3 Layer mit 0,6 Nozzle
I found that the design of the original X carriage on the Xtool D1 printer made it really difficult to remove slack - the adjustment being by nut and bolt and squeezing the bottom deep groove bearing against the rail…the adjustment…
Unfortunately I don't have a photo of the broken band, but repair is quite straight forward: Cut the Band flush. Punch a pair of holes for the new flap. Use the clip as a reference. Mount the new flap. Secure with the clip, maybe use some…
You would need a few supports, maybe add some loops, do what you want.
This is the elusive lower iron support that holds the wiring harness for a Waring WMK300 waffler. It will work with all of the 300s as far as I know. Print it out of PETG minimum. Those suckers get hot. You may want to make a couple of…
4mm bit holder scale for Nextool k30.
A hinge in my kettle broke so I designed a replacement part for it. Printed with 0.1 layer height. - Print on side with supports. Needs ABS / ASA. I tried PETG and that melts after few boils.
Ersatzteil ist nicht mehr lieferbar, deswegen von mir gezeichnet. Drucken mit PETG und 80% infill ohne Support. Mit 0,1mm FAST Detail halten auch die Abstandhalter problemlos. Am MK4S passt es gerade noch diagonal auf den Drucktisch.
Parts are printed in different orientation and then glued together. Latches are 100% perimeters
An extended version of the original tool holder from bortech88.
WIP - the handle is maybe 0.2mm too long over it's entire length, and there's not enough margin on the “boltway” parts: I cracked my handle slightly while putting them in. But it fit on line, so I probably will not fix this model, unless…
A hinge in my kettle broke so I designed a replacement part for it. Printed with 0.1 layer height. - Print on side with supports. Needs ABS / ASA. I tried PETG and that melts after few boils.
I purchase this cheap amp online and wanted to mount it on a wall for easy access. The mount can be attached to a wall (or whatever!) with two or three flathead wood screws. I ended up only using the two top screws for my project and that…
This tool allows you to keep your machine's taper clean. Just add some 2mm felt stripes to the cone so you can wipe the inside of your machine spindles clean.
An der Rührschüssel der Braun Küchenmaschine K3000 gibt es einen oberen und unteren Mitnehmer. Wenn diese reißen, funktioniert der Antrieb nicht mehr. Ersatzteile sind leider nicht mehr erhältlich. Hier ist der obere Mitnehmer, den…
Overview Dead_K is a lightweight 3" deadcat ultralight quad (~91 g dry weight) , designed as a vacation drone : portable, reliable, and optimized for easy filming with a DJI O4 Light — no propellers in the camera view, no fuss. It’s not…
I purchase this cheap amp online and wanted to mount it on a wall for easy access. The mount can be attached to a wall (or whatever!) with two or three flathead wood screws. I ended up only using the two top screws for my project and that…
Clip de fixation Tube PTFE de la Palette 3 Pro sur extrudeur de la 3DEER MK300 PTFE tube attachment clip for the 3 Pro Palette on the 3DEER MK300 extruder
Print Settings Rafts: No Supports: Yes Resolution: 0.2mm Infill: 15 Filament: PLA Notes: Print upside down with feet to the sky. To use less material choose organic/tree supports.
Printed in PLA but PLA+ or PETG would work as well or better. Prints lying down and they fit snugly on the powerstrip.
