Counting matching models…
This is my self-designed, 3D printed, handwired, mechanical keyboard. It's a 75% layout with clickable volume knob and runs on QMK Firmware, so you can reprogram it to whatever you like. This is an extremely involved project and is too…
A remix from doubleomarty nice looking wrist rest. It does not properly fit my YMDK split 75% keyboard so I have to make some adjustments. Original file https://www.thingiverse.com/thing:4787470 The Keyboard…
BMW K100/K75 Keychain Printed with BambuLab P1S 0,4mm nozzle
Print with supports, secure to handlebar with two wide zipties and done. Harness not included. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: Yes Resolution: 0.24 Infill: 30 Filament: Devil Design PETG Category:…
Die Abdeckung habe ich in 100% Volumenfüllung gedruckt aus hitzeresistenrerem PETG. Die Originalen Schrauben M6x20 habe ich gegen M6x30 ausgetauscht und bislang ist das ganze ohne zu schmelzen im Einsatz. Benutzung natürlich auf eigene…
Adapter um einen Scheinwerfer an die 41mm Gabelholme anzubringen.
Be warned: this model is designed to be printed at around 32mm scale on a resin printer, but the legs are wildly skinny compared to the bulk of the body. It's doable (i've printed several with no real problems), but it does require care…
In the same style as my Discipline 65 case, here is a case for the LCK75, R2. I'm saying R2, because I'm not sure if this would fit an R1 board or not. If the bottom plate is unchanged from R1 to R2, this will fit an R1 as well. Print it…
A spare push-button for the SK75 dive knife from Subgear Print instructions Rafts: Doesn't Matter Supports: Yes Resolution: 0.1
Well, what else do you expect me to say about this? Print out of TPU and that's it
Motorrad-Lenkergriff-Gummi-Hülle für K750 aus TPU. Dafür habe ich SUNLU Flexible TPU Filament 1.75mm, 95A TPU genutzt.
I designed inner piece of dash switch, because I needed ON/OFF/ON switch for additional lights, but had only warning light switch. Once you open OEM switch there is bottom part with copper contacts - remove it, make new contacts out of…
Die NuPhy Kick75 ist eine mechanische Tastatur, die von Grund auf für die Maker-Community gedacht ist — mit offiziellem Support für 3D-gedruckte Anbauten und Anpassungen. Statt eine fertige Tastatur zu kaufen und dabei zu belassen, lädt…
This is a 10mm riser feet for the $45 Nuphy Air75 clone sold on Aliexpress, like https://www.aliexpress.com/item/10050058 . It's a tight fit on the original magnetic feets so you may have to deal with your XY compensation, no need for…
Why I Made This The keyboard feet that come with the Feker IK75 don't have the strongest latching mechanism and I managed to break mine Description This was my first time using Fusion360 and I whipped this up fairly quickly. I'm sure the…
Custom gauge holder designed for Dniepr MT-9, Ural, and K-750 motorcycles. It mounts to the upper steering column shroud using three screws. I designed it to add oil pressure and current gauges to my Dniepr MT-9 without interfering with…
I designed this knob cover for the Feker IK75 to cover the knob with another color matching the Keycaps. I printed it in TPU to have a nice touch to it. It turned out perfect and I like it. Simple and helpful.
Tachohalterung inklsv Schaltereinbau für Griffheizung Vorgesehen für einen 95mm Tacho von Acewell. Aussparung für Schalter KCD1-105 Wippschalter 250V vorhanden.
Pojemnik do Expresu do kawy marki Bosch model TCC 78K751 - to moj pierwszy projekt stworzony na wlasne potrzeby program
The Acorn! The one true organic. Comes in two flavors, fixed axle and unresponsive c bearing. For the fixed axle you will need 2x printed halves 1x 4 mm x 20 mm stainless steel pin 2x mr85 response pads (or flowable silicone) super glue…
This is a modified version of the MK75 that adds a 5 way switch, lots of macro buttons and an OLED The wiring is shown on a picture. If you wish to replace the 5 way stick with either a button or a knob check out the original files here:…
As seen in my video:
Attached thread to mount a M12 nut onto the knob
The Acorn! The one true organic. Comes in two flavors, fixed axle and unresponsive c bearing. For the fixed axle you will need 2x printed halves 1x 4 mm x 20 mm stainless steel pin 2x mr85 response pads (or flowable silicone) super glue…
This is a modified version of the MK75 that adds a 5 way switch, lots of macro buttons and an OLED The wiring is shown on a picture. If you wish to replace the 5 way stick with either a button or a knob check out the original files here:…
Securely friction fits into the attachment point on the Kick75 after removing the red silicone cover. This remix fixes a design issue with the original model NuPhy released, which sat proud of the bottom of the keyboard just enough that…
3D Printed Sunflower Tall Knob for the NuPhy Kick75 (Multicolor) Add a touch of summer to your keyboard with this beautifully designed 3D-printed Sunflower Tall Knob for the NuPhy Kick75 . This decorative multicolor sunflower cap is…
3D Printed Simple Flower Tall Knob for the NuPhy Kick75 (Multicolor) Add a touch of spring to your keyboard with this beautifully designed 3D-printed Simple Flower Tall Knob for the NuPhy Kick75. This decorative multicolor flower cap…
3D Printed Floral Phone Stand for the NuPhy Kick75 (Multicolor) Bring a natural, calming vibe to your desk setup with this 3D-printed Floral Phone Stand attachment, designed specifically for the NuPhy Kick75. Featuring a soft sage green…
Cover, for brake fluid reservoir Model Years: 1982 - 1996 Manufacturer #: 32 72 1 454 944 For BMW Paralever Modelle R80GS R100GS R100GS PD from 1990 and R80R R100R R100R Mystik R80GS Basic K75 K75C K75/2 K75S K75RT K100 K100/2 K100RS…
This is a hub cover for my BMW K75s (1988er) motorcycle. The hub cover should also fit for other K75/K100 models with the same rim. The cover is made of Shore 95A TPU (Eryone) with 25% gyroid infill. The GCODE file prints with 210°C…
