17 models
Festool Zero Clearance Insert – Precision cuts with maximum safety! Print your own Festool Zero Clearance Insert for cleaner cuts, higher precision and maximum safety. Cleaner cuts: Minimizes tear-out and splintering for flawless edges…
Prevent blow-out on the back side of your workpieces with this simple solution. It clips right into the “half-circle” recess in the middle of the fence bracket. Once clipped in, unclamp both side fences and pull them inward, until each…
Keep your Kapex from blowing out the grain on the back side. I've seen similar items, but they were bolted to the saw only worked at 90 degrees. This is easily removable and also allows the saw to move freely while installed. Front face…
Similar to the Colliflower Cube only you don’t have to replace your rear fence. Mine reuses the existing back two bolts for the throat plate. It will cut straight on and bevels but you can't rotate the fence for miters otherwise the…
Festool Kapex 60 Niederhalter für Klemme KL-KS 120. Damit kann man die Klemme die eigentlich nur für die Kapex 120 funktioniert auch an einer Kapex 60 verwenden. Einfach von unten durch das vorhandene Loch mit einer M8 Schraube am…
Adapter for the 36mm Kapex hose. It has the tabs built into the adapter which will click in and hold the hose just like a normal Festool hose. Printed with PLA with no supports (with the larger diameter on the build plate)
I was wondering how to make some cheap version of stop for FESTOOL Kapex saw. This works for me pretty well. There is an older version of the stop at the pictures. In the provided files you will find little tweaked version. You will need:…
I own The Cube for Kapex (Zero-Clearance Fence) from Jack Colliflower. (https://www.colliflower-zci.com/store/colliflower-zero-clearance-fence-for-kapex) It's an ingenious design and works great. It has also improved my dust collection.…
Recommend printing with 4-5 perimeters in order to not have exposed infill after you cut through the part and if your saw is off center a little (like mine is). Orient the print so the overhanging tabs at the joint sit on the build plate.…
Print in TPU. All walls, no fill or bottom/top layers. Normally the “hooks” on the hose do not need to be engaged in the holes as the adapter should be tight enough to hold on the hose.
This is an adapter to connect the standard FESTOOL Kapex KS 60 E miter saw vacuum port to a SHOPVAC camlock connector. On side A is the festool part and on side B the camlock male part. An additional thanks to…
Upgrade für deine Kapex KS60 um den original Niederhalter der Kapex KS120 verwenden zu können. Einfach anschrauben und die Klemme KL-KS 120 zum festhalten verwenden. Beidseitig verwendbar. Einfach von unten durch das vorhandene Loch mit…
This holder has especially been made for the underframe of the Festool KAPEX KS-60-E and can hold up to 4 tools. The main_body.stl is available in two versions: with/without Festool logo. Mounting is very easy: Print the main_body.stl and…
Put this holder in the MFT table nearby from KAPEX KS and you have a Support for your cutting material. The holder is a support and replaces the flat systainer.
The mounting holes on the Kapex were too small for the bolts on my Harbor Freight stand. These blocks screw to the feet of the Kapex and allow you to mount it with larger bolts to your miter stand. You may have to tweak the size of the…
Didn't want to spend a bunch of money on expensive dust collection hose so I made these to adapt cheap 1.5" dust collection bulk hose to my vacuum and KS120. The Kapex-side adapter has internal features to engage and twist with the port…
Festool Zero Clearance Insert – Precision cuts with maximum safety! Print your own Festool Zero Clearance Insert for cleaner cuts, higher precision and maximum safety. Cleaner cuts: Minimizes tear-out and splintering for flawless edges…
