Counting matching models…
This is a 3D model for the CS:GO Karambit knife. The model is 1:1 scale and is 19 cm (~7.5 in) long. The download contains 3 different models, including the full body, and two different split version. If you have any problems, contact me.…
Karambit knife with a lot of details. Printed on MINI, 0.2 layer height, supports
NEW FIXED FILE !!! This was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
A compact and satisfying Makarov-style fidget keychain featuring a smooth, functional sliding top. Designed for stress relief, display, or everyday carry, this mini model keeps the iconic look while staying completely safe,…
I had old utility blades with no usage laying around until I found this awesome design . I thought a few improvements could be made, so I changed the design a bit and added “grippy” features and “clicky” flexures. You can find a video of…
So, I got a little side-tracked and designed this, hope you like it!
Everyone loves bolt-action pens so why not have a pen that looks like a bolt action rifle? What started as a joke turned out to be one of my favorite 3D Printing projects to date. be sure to check out everyones awesome makes! BOM printed…
Klipy służą do wpianania w profil drukarki i układania w nich przewodów, oraz owijania ich za pomocą trytytek:-).
Karambit split into three separate models
An minimal yet elegant combat Karambit knife. The Finger cutouts use the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or…
A karambit I derived from another model. The two halves can be glued together with or without pins, but the pins will make guiding the two halves together easier. I DID NOT MAKE THE ORIGINAL DESIGN.
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Viz Manual_1990_CZ.pdf See Instructions_1990_EN.pdf Hotový model na fotografiích je na prodej. The finished model in the photos is for sale.
Heyho Ich glaube mein Schwein pfeift :) (German) my daughter had a beautiful ocarina made of clay. Unfortunately, this had fallen down and shattered into 1000 pieces :( So since she was very sad I downloaded and printed a simple one. But…
We take Mario Kart live a little too seriously in our house, so I spent way too much time putting together some themed trophies. Saw a similar idea somewhere on google but they didn't share their STL so I made my own improved version…
Lord of the Ring - The One Ring dice bowl by Skar84 - Thingiverse This is a reupload because of course thingiverse is so broken the page and file is gone AND you cant even log in anymore. All credit goes to Skar84
Super Mario Kart inspired toy with movable wheels and steering. I hate supports so all parts designed to be printed without supports. All tolerances are checked for easy assemble. Make sure your printer is calibrated. Every printer is not…
This is an OpenRC Project for a Go-Kart As Some friends and I decided to create an extra class for hobby driver with self printed RC cars ... we started this project. We will try to reuse as much as possible from other projects so that it…
Hi Craig, This was all I had, hope it was what you were after, Cheers Jace https://en.wikipedia.org/wiki/TT\_pistol
Mario Kart Tournament Trophy for 1st 2nd and 3rd place. Category: Games https://www.thingiverse.com/thing:1531195
I had bad results (too tight & too small joints) with the other one's tiles grid… made my design. Easily snaps together with big L-shaped joints to grow the board in any direction as necessary. It helps when the board has to be shifted if…
Summary This is a clamp-on vise with interchangeable TPU pads and a 5" operating range. 100% 3D PRINTABLE Additional Parts: 3x Retaining Clip.stl 2x Guide Rod A.stl 2x Grip.stl Assembly (See Pictures): Adhere Frame Base Pad TPU to Frame.…
Description: Elevate your fidget game with a 3D printable Folding Karambit Knife Fidget Toy! This unique creation seamlessly combines a sleek design inspired by a CRKT style folding Knife with the satisfying functionality of a fidget toy.…
Popular well with CS2. I also created a remix where the blade can be printed separately. Without AMS.
Edit: Added version for more common 2-notches 61mm/2.4inch blade. Whole thing is slightly bigger but it still fits nicely in the hand. My remix of super cool design I found here on Printables:…
Karten und Geld Halter für Monopoly. Größe 224mm X 142mm
Perfect for: Collectors Keychain accessories Gifts for friends or firearm enthusiasts The design is carefully detailed to ensure high-quality prints even on basic 3D printers. Printing Settings Recommended layer height: 0.2 mm Supports:…
Self modeled in Fusion360 off screenshot from a Karambit blue gem in CS2, enjoy!
Fast and easy to print, the bearing needed is 61703ZZ 17x23x4mm, I ordered mine here: https://aliexpress.com/item/32816178869.html the bearing fit is tight so use something hard to press it in
First a little explanation: Subitus means impromptu in Latin. Karambits are a type of Indonesian martial arts knife. Disclaimer: Karambits are very dangerous and (quality) utility knife blades are razor sharp . Even if you are an…
Here we have a remix of zykovkristian's model of a V8 Business Card holder. I made some changes to make it easier to print (crankshaft alley removed, oil pan bores removed, crankshaft bores reduced, details in the head minimized, map slot…
This is my Tokarev TT-33 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. I made my example at 1:3 scale on my resin printer. You could scale it down for GI Joe…
My version of 3D Printable Folding Karambit Watch the video: youtu.be/GuLe6meCFzg I was inspired by Koss video: youtube.com/watch?v=JAw94JMxOrc BoM: 4x Door handle screws, 8x M4 washers, CA glue. If you don't have door handle scerws you…
Introducing the remarkable 3D-printed Karambit Key Spinner, a fusion of functionality and aesthetics that seamlessly combines the practicality of a keychain with the mesmerizing charm of a spinner toy. Crafted with precision and…
Karambit CS:GO Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.12 Infill: 25% Filament: Smart materials PLA Black and red Category: Toys & Games
Model je určen pro zkušené modeláře. Model je stejné koncepce, jako zde mnou zveřejněná dakarská Tatra z roku 1990. Pro tu jsem ale sepsal podrobný návod, doporučuji přečíst a nastudovat! U Tatry 6x6 je větší změnou pouze poháněná přední…
Printed with 0.2mm layer height.
The source marked this model as adult content.
Length - 213 mm Handle length - 140 mm Blade length - 50 mm Blade holder thickness - 5 mm Knife thickness - 17 mm Lock type - Back lock Print settings: Infill -100% Material - ABS plastic Layer height- 0.2 mm Print speed: 50 mm/s Screw…
Brief History of the Karambit: The karambit was originally an agricultural implement designed to rake roots, gather threshing and plant rice in most of island Southeast Asia. It's a smaller variant of the Southeast Asian sickles. It still…
UPDATE 25/08/2026: Updated description. UPDATE 7/08/2026: Removed old files. MAJOR UPDATE 16/07/2026: 2.0 out now, no supports and better looks. SUPER SMALL UPDATE 22/03/2026: I've changed to xtrud3r, or x3 for short! Also changed the…
You have to print it in 2 parts and then fit it in the fall, you have to pay attention that when they fall into your stack, they fit together carefully, so you don't even need glue, because if it breaks, it can be replaced.
Check the difference section at the bottom for feature list! I really liked the original model. Thanks FreddyZ! I started just wanting to make it easier to print, but feature creep got to me. But the result is good, and it was a good…
can be printed together the model needs to be glued together or separately in other colours can be printed without support the Kart is very realistic Print in place kit card , Assembly required
No support Magikarp. Colored 3mf included.
Dummy 13 Go Kart! UPDATE: Now includes split rims/tires for TPU tires. --- Rev up the fun with this 3D-printable go-kart designed specifically for Dummy 13 action figures! This sleek and compact vehicle features a detailed steering wheel,…
Printed at 0.2mm layer height with a 0.6mm nozzle on my MK3S
Simple karambit fidget toy, not sharp, not pointed, no gluing and no support necessary. --- Einfaches Karambit Fidget Toy, nicht scharf, nicht spitz, kein kleben und kein Support notwendig.
This project is a remix of the Valorant Velocity Karambit by MaitreLancelot on Thingiverse ( https://www.thingiverse.com/thing:5198504 ) This project was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot…
Thank you JonnieZG for sharing your "Vacuum Sucker for Drilling" ( https://www.thingiverse.com/thing:2939576 )! Great design since through the hole you still have full visibility on what you are doing, while in the same time through that…
Print in place kart kit card. Assembly required. Printsettings: 0.16mm layer height No raft No support A multicolor version is coming soon!
3D model of Karambit, in parts so you can print easily
these Figures are made by Frogkillerpl. I really love them. the Figures are not the original from the boardgame but very similar. at the moment i try a little bit to find the correct size and print procedure, so i cut the figures und…
Update Jan 2024 - I added a third version (v3) with a center square and fewer connecting lines for faster printing / less filament usage! Update - I added a second version with connecting lines for faster removal from the bed Since bed…
Whipped this up quick in fusion360. My take on the Beskar bar in The Mandalorian.
I made it in the image of a traditional Japanese lantern. Necessary items in addition to 3D printer products A 60*120 piece of paper “ precisely " cut from A4 paper LED tape light Power supply Please refer to the image for how to…
Turkish drone Baykar Bayraktar TB2 model. Printed on Artillery Hornet 3D printer. Material ABS To print from ABS, I had to add a tower, which is connected to the wing.
Just simple Gravity Karambit Knife Fidget Toy. Need 5 M3 12 bolts to assemble. Some glue for blade.
This box is a remix of my own UNO card box which was inspired by JeremyVS's "Customizable Card Box with Cutouts" over on Thingiverse (https://www.thingiverse.com/thing:137961).
Stojánek na pokémon kartu --- Pokemon card stand
Banana Training Karambit. Print with a good amount of infill for a nice momentum. Have fun printing.
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) KARL - THE READING GHOST /…
A beskar brick wallet I remixed from a couple of other designs. I use it every day!
Pokemon Karten Ständer: Für die Standardarten Feuer, Wasser, Elektro und Pflanze Kein Support notwendig. Für Multicolor layer change bei 9,20 bei 0,2 mm layer height. Pokemon card holder: For the standard types Fire, Water, Electric and…
The print consists of two parts. Print them separately and slot them together with some glue.
See Original : https://www.thingiverse.com/search?q=foldable+karambit&type=things&sort=relevant Print Settings Printer Brand: FlashForge Printer: Adventurer 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: KCamel PLA Black…
This karambit utility knife prints in one piece and requires a razor blade and two M3 button head screws . Use the techniques shown in this video to produce different designs! If you are looking for a compact utility knife, check out my…
The karambit is a traditional knife from Southeast Asia, featuring a curved blade resembling a tiger's claw. Initially designed for agricultural use and later adapted for martial arts such as Silat, the karambit is ideal for…
I have printed the original from Dani Projects and as I wanted to glue the handles together, they wouldn't close fully. So I added some distance (total 1,2 mm) to them and it worked like a charm with no need of cleaning up. Use supports…
wooden beer mug tankard Can Holders portalatas cerveza vikingo
A scissor holder for the Skådis / Skadis system. Specifically for the Fiskars 21cm scissors.
EN: Simple carabiner with safety lock against opening and slipping out in three sizes. It is a plastic product - it cannot be used instead of a real metal carabiner! Rather suitable for hanging toys to a baby stroller etc. CZ: Jednoduchá…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint This one is a two part bust with a separate base. Supports will be needed for the back of his…
This remix of Dani Projects' Karambit Knife streamlines the printing process, especially for multi-color printer setups. It combines the original parts into two, a half-knife and a half-handle, enabling one-shot printing without…
Bosch PST 650 jigsaw. Makita BO 5030 sander. Makita 9910 sander. Bosch PKS 40 circular saw. 2 mm width. Category: Parts
For those who find classic grids distracting and boring ;-)
I now als designed the knife in two pieces so dont need as much supports as before
Schnell und problemlos zu druckender Kartenhalter. Egal ob Erwachsener oder Kind, dieser Kartenhalter ist für alle da.
since I'm a big fan of Anime and now I've finished watching DanDaDan I just had to make this mask because the series is so freaking awesome.
This is a model inspired by Steal a Brainrots SECRET Karkerkar kurkur. This was made in tinkercad from scratch
Couldnt find a nice model to tprint so i created this one based on a picture i found on the flaticon.com site. Link for this and more pictures: https://www.flaticon.com/br/icone-gratis/karate_2265094?related_id=2265094&origin=search Hope…
Ruby Roundhouse for the Prusaprinter competition. Some company for my Bravestone. I will definitely finish the split version, but due to the deadline I didn't make it, hopefully you will like it ;) JUMANJI !!!
I used no supports. I split the model into two parts and then glued them together.
A jokari paddle, one side got a little bumpy though.
Einfacher Verschluss für Silikonkartuschen. Verwendetes Gewinde: M15x1,5. Dieses sollte auf die meisten Kartuschen passen. Fusion360 Datei ist mit angehängt, so könnt ihr alle nötigen Anpassungen vornehmen.
This card tower is designed to hold both the Karak and Karak Regent expansion cards. For Carcassonne, it has been tested with the Basic game and the Inns and Cathedrals expansion. For optimal use with Karak, I recommend pairing it with…
so this is a folding karambit, credit to Biobernhard (thingiverse creator). i found this model online and re edited it to be able to be printed in separate colours, only requiring a little super glue to keep them together. ill try to find…
The Mandalorian beskar armor left arm (whistling birds). The model is based upon on-screen pics and it is not very accurate (I haven't been able to get quality pictures of it). UPDATE: Uploaded new "electronics friendly" version (V23). It…
Can't print a lattice cube? Ring coolers don't help much? Too lazy to print a Bullseye or Hero duct? The Karo cooling fan duct was designed with the following considerations: I want to actually be able to print a 3x3 lattice cube without…
V8 Visitenkartenhalter / Business Cardholder
Mario Kart Please use and download updated mariokart2legs (3.1.25) - Thank you WildVal Old version will be left up for a year or so.
Clicky karambit, but with no overhangs. I highly recommend using the 3mf with negative parts for the M3 nuts to recess into. I exported it from Orca Slicers, and it unfortunately might not work in Prusa Slicer.
Why? My buddy showed me those when we were talking about a drywall ceiling I was about to put up in my living room. While many different tools like that exist already I wanted to make my own to practice CAD and add mounting for the “laser…
1st place trophy for a Mario Kart tournament. Ideal for recurring friends or office tournamnets, since the trophy has removable tabs where you can either manually write the names of the winners of the tournament or directly 3d print them…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
