Counting matching models…
This page is a Wiki regrouping all the necessary informations about 3D Printable TPU Files for the Kayoumini 2.5" . All of the .stl files are available in the “Files” tab. Kayoumini 2.5" Starter Pack - All you need to know Recommended…
This page is a Wiki regrouping all the necessary informations about 3D Printable TPU Files for the Kayouloin 7" FPV Drone Frame. All of the .stl files are available in the “Files” tab. Kayouloin 7" Starter Pack - All you need to know…
This page is a Wiki regrouping all the necessary informations about 3D Printable TPU Files for the Kayoudur 5" . All of the .stl files are available in the “Files” tab. Kayoudur 5" Starter Pack - All you need to know Recommended…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Print in rigid filament (PLA, PETG etc). Total plastic required is ≈140g. Additional hardware required : 6x2mm Magnets 1.75mm Standard filament (PLA, PETG, Whatever) for the hinge. Hinge and magnets are mounted as shown : Use cyano glue…
The agent Kayo (from the game valorant) knife. This was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. https://www.riotgames.com/en/legal
Added another layer to the original design to hold the individual Battery strap strongly in place - minimizing potential damage to the FC/O4 air unit during a crash. Added a version that holds the XT30 cable firmly in place, away from the…
Lens Mod Instructions
I made this to hold my Betafpv Lava 450 packs, but you can find the (super simple) source in the downloads so you can easily edit the dimensions. Print out of TPU.
This page is a Wiki regrouping all the necessary informations about 3D Printable TPU Files for the Kayouflip 5" . All of the .stl files are available in the “Files” tab. Kayouflip 5" Starter Pack - All you need to know Recommended…
Update 08.02.2026 noticed that you can't flip the video feed in the goggles anymore. So cam needs to be rotated 180 degrees and therefore the "backplate" needed changes 15, 25 and 35 degree mount for Kayoumini 2.5 and the Flywoo O4 Wide…
Updated version now allows easy ND-Filter switch and adds support for 12mm and 15mm Standoffs.
I make these per request, so DM me, or email me at [email protected], and I will try to get back to you as soon as possible. If you're using Cura, I made a short tutorial video here for how to print it: I'm making valorant keycaps for…
Remix du très bon kit TPU led pour Kayoumini de shaks -TPU de bras UltraHeavy/light version ©®™ -Backpack lineaire kit TPU led avec passage de cable xt30 (sans antenne ELRS, c'est pour les faible) -Camera mount pour baby ratel 2 à angle…
Made for Kayoumini with Flywoo DJI O4 Lite Wide-Angle Lens Angle - 35/40/45°
Salut à tous !! Voici une protection de bras plus venère pour le Kayoumini . Je cherchais des protections de bras pour protéger nos petits moteurs de chez happymodel qui sont très fragiles. Pour ce qui est du filament j'utilise le…
Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder
The agent Kayo (from the game valorant) flash. This was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. https://www.riotgames.com/en/legal
Short front brake lever for a kayo motorbike. printed from PCCF 6 walls 40% grid infill .2mm layer height
Introducing the Kayo Motocross Keychain, a perfect accessory for motocross enthusiasts and 3D printing fans alike! This detailed keychain captures the essence of the Kayo motocross bike, showcasing its sleek design and intricate features.…
Holds antennas firmly in place + easy printing + polygonal design.
Reduced weight of @mosch_3121698 's design by +1 gram. Adapted to 15mm standoffs. 25 degrees only.
Kayoumini Flywoo Wide Canopy 20 degrees 12mm and 14mm Standoffs. I print lens down for best results.
Case for kayoumini. Inpired by this model https://www.printables.com/model/1169325-kayoumini-25-travel-case Printed with PLA without support
This is an antenna mount for the Kayoumini quad. It features holders for the RX antenna, the VTX antenna and storage for 2S balancer plug. Choose between 14 and 15 mm standoff height and 3.5 and 4.0 mm standoff diameter. Print with TPU in…
DJI osmo nano Kayouloin case 25° Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu Free my models 6a74c3eeeb1d
Simplified and easy to print Kayoumini Travel case with and without magnet insets. Additional Hardware required for magnet case versions: 6x2mm Magnets 1.75mm Standard filament (PLA, PETG, Whatever) for the hinge. Attention Designed for…
This is a fully parametric reproduction of the original Kayoumini frontend by Kayou Frames in Autodesk Fusion. You can easily tweak it for any camera by changing the user parameters here: Here are the available parameters A quick rundown:…
Light-weight (2.3g / 1.7g) Flywoo O4 Wide Lens mounts for the Kayoumini. My goal with this Mod was to create a very light and compact canopy. By moving the tall Flywoo wide lens in front of the bottom plate it created two additional…
Kayouloin ELRS mount vertical. (RP3) Category: 3D Printing
Shaks DJI Osmo Action 5 pro for kayouloin 7" tilt 25° et 30° disponible new version Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
Inspired by YannickFPV's great designs for the other DJI cams. Protect your Osmo Nano while smashing your quad into walls! No TPU in view in ultrawide! Supports generic ND filters, like TBS and CameraButter. Print vertically with…
A little Stylish rework of the canopy for the caddx ant (i actually redesigned it from the ground up, but i made it to be the same shape) with some slots to be colored with nail polish. that is a bonus if you care for color matching your…
Backpack pack Kayouloin 7" gps 25x25mm avec 1 ou 2 antennes Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
The “full” version is more resistant, it weight ~2g more at 100% infill
Information The other designs I saw with a holder for the balance and/or XT30 connector had only one of the connectors on the strap or not at the right place. So I just modified the version with the balance connector and added an XT30…
Modified original 20 degree Kayoumini to use DJI 03 lens. Printed in TPU as the original.
Kit 12mm pour KM avec backpack elrs + linéaire et les protection de bras.
Kayoumini 2.5" backpack housing XT30, default DJI O4 antenna and TBS Tracer Immortal T (I believe it has 80mm cable). For 15 x 4mm standoffs. Slightly larger version of "kayou_ass_xt30_90d_fixed" with XT30 removable without soldering and…
KayouLoin Support GoPro Filtre ND 9 10 11 12
Vous avez besoin de rajouter une table basse à votre kayouloin ? Ce fichier est fait pour vous Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
KAYO flash, a modded version more robust. Also a divided version for easier printing
KAYOUFLIP ARMS BUMPER KD STYLE ADD ultra heavy 20-06-25
KayouLoin Support GoPro Filtre ND 9 10 11 12 tilt 25° Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
KayouLoin Support GoPro 9 10 11 12
case pour Osmo Action 3/4/5 Kayouflip / Kayoudur Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
This is a lens cover for the Kayoumini frame from Kayou Frames. It prints quickly and only using 1.5g of filament, so its a fast and cheap upgrade for the drone. It snaps into place and to remove it just pull out of one of the tabs on the…
Vitesse maxi augmentée de 80 km/h si imprimé en rouge.
Fits both front standoffs and adjusts perfectly behind the front TPU. The button on the side is ideally positioned for the Vifly Finder 2 Buzzer. Choose between 12.5 or 10 mm as the capacitor diameter size.
tadam les print soidixsant inutile de rady
This is a storage box designed for the Kayoumini , featuring an upper holder that can secure up to 6 batteries . The design was made using Flywoo Explorer 420mAh HV 2S 80C batteries , but other batteries with similar dimensions may fit as…
This is a backpack for the kayoumini, the Happymodel Crown antenna, and an ELRS T-Antenna. An 18AWG power cable should fit on top, but I didn't test that. There's a short and a long version. The short one is a quick edit in Meshmixer,…
Frontend to go alongside my Betafpv CO3 Lens Mod for the DJI O4 “lite” that can be found here: https://www.printables.com/model/1380946-dji-o4-lens-mod-betafpv-co3-lens-my-best-to-date I've only exported the 25deg STL that I use, but I'm…
Remix "Kayoudur/Flip Gopro Session 4/5 Mounts". NO TBS FILTER SLOT 30° Category: 3D Printing
Shaks DJI Osmo Action 6 for kayouloin 7" tilt 25° Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
Set of files to protect your already stirdy KayouDur based drone. For the moment, the set consists of : A different model of motor protection. I don't know how better/worse it is to the original but I wanted to make my own. A lipo…
This is my HDZ Nano90 TPU camera mount for the KayouMini FPV quad frame. In order to reduce weight, instead of holes, I use a single perimeter, with 15% gyroid infill. This creates a light “air matress” effect that protects the camera…
I built a KayouMini with the components I had left: a Flywoo Nano V3 and a TrueRC Singularity antenna. The camera mount lets me install the ELRS antenna and route the XT30 cable over the top so it won’t get hit by the props. The antenna…
This fits a kayoumini build using the XT30 cable that comes with the AIO15 and I have tested it with the flywoo explorer 420mAh HV 2S LiPo Inspired by models such as: and
Here's a camera mount for the new original DJI O4 wide-angle camera. I designed it for my own frame, which you can find here: The camera housing should also be compatible with the Kayoumini. It was designed for base plates ranging from…
EN: These are replacement feet for a "Kayoom" armchair. They are simply pushed into the square tubes. For good stability, I recommend PETG and 100% infill. The corresponding model file for FreeCAD is attached. DE: Dies sind Ersatzfüße für…
KayouLoin Support GoPro 11 Mini Filtre ND
se monte à la place de "KD-F_O3_Antenna.stl" sur la page officielle des TPU Kayoudur / Kayouflip de @KayouFrames_1397485 Utilisez des antennes en 5.8 Ghz Exemple d'antenne utilisées, en 5cm de long:…
Information I made a 20° and a 25° degree camera mount for the BetaFPV C03 cam. I couldn't find any good mounts for the C03 that looked like the original. Kayou Frames has a 30 degree version on their Printables page but that's pretty…
Just a quick remix of the original 20 degree o4 camera mount for the Kayoumini. O4 ND filters from Flywoo. I do recommend printing in black TPU or at least not in a translucent colour like I did because you will see some of that colour…
Petite conception rapide, histoire de tester, de s'amuser, pour faire une MPX en mode Kayoumini. On gratte un peu de poids si on compare au TPU Red Bull. On perd à peu près 10 grammes, ce qui n'est pas négligeable. On retrouve un peu le…
I did create this Vista antenna protection for my Kayoudur 5inch frame: Added 25° and 45°. I added ELRS antenna mount (I use Happymodel EP1). Print Settings Printer Brand: Artillery Printer: Artillery Genius Rafts: No Supports: Yes…
Kayouloin FPV Cam 19mm w/ RX ELRS. Category: 3D Printing
This was made for using the lux camera with the aio15 in the kayoumini.
Here are a few camera mounts for the Flywoo DJI O4 wide-angle camera. You can also attach ND filters! The mounts were actually designed for my own frame, which you can find here. The camera housing should be compatible with the Kayoumini.…
I created this buzzer support for Kayoudur. This is compatible for Vifly Finder 2.
Remix of the backpack for my two antennas, space for wires underneath and antennas up top.
You can use the flywoo o3 lite nd filters with your o3 lens mod (dji o4 lite). For 12mm standoffs / 25 degrees of tilt
Information The backpack is designed for the RushFPV Cherry II but should fit with other RHCP antennas that are the same size. I also uploaded the STEP and F3D file if you want to edit the design. Printing Instructions Print with 95A TPU…
This is an improved mount for the Caddx Ratel 2 / 19mm Camera with less Tpu and Standoffs in view while keeping you lense well protected. Never broke any camera with this mount.
KayouDur & KayouFlip Support GoPro 9 10 11 12 Logo Kayou
KayouDur & KayouFlip Support GoPro 9 10 11 12 ND Phen X Frame
DO *NOT* SHOVE THIS INTO JST PLUG ITSELF. This fits in the space between the frame and the outside of the plug
BackPack pour KayouMini BT3 Un mini backpack pour inclure proprement une mini antenne et un mini connecteur BT3 pour votre mini Kayou. Vient se prendre sur les mini entretoises arrières qui stabilisent le TPU. Mini protection pour la mini…
I did create this arm protect for my Kayoudur 5" frame. I added a feature to use zip ties... But finally, I never used zip ties and never lost it. Print Settings Printer Brand: Artillery Printer: Artillery Genius Rafts: No Supports: Yes…
KayouDur & KayouFlip Support GoPro 9 10 11 12 ND
RUSH FPV Tank Solo VTX mount for Kayouloin. Category: 3D Printing
This is an Ikea Skadis holder for the tiny but mighty KAYOUMINI. It has 2 hooks so it doesent rotate in the pegboard. I printed it in ELEGOO pla and it only uses 7 grams of filament, so it's an easy and fast print.
KayouLoin Support GoPro Filtre ND 9 10 11 12 + Batterie
Kayoudur Arm Bumper Airbumper offers more impact protection and saves your carbon arm. Remix of Lightweight High OG Skid. Best printorientation is shown in last picture.
Kayoumini C03 30° Cam Mount w/ Integrated ORT Micro Vee and x14 ELRS antenna mounts. Remix from original. Prints with supports lens down. You will need the 40mm version of the micro vee when using the Happymodel x14 analog AIO. Printer…
la caméra filmera en 8K / 240FPS si imprimé en rose bonbon
I was bored of difficulty to support the KayouMini camera TPU prints. So I made this little manual support that needs to be inserted mid print at Z=4.20mm It allows perfect no support printing of camera TPUs. Print the support in PLA,…
Kayoumini Canopy for O4 lite with Betafpv's C03 lens mod. Print in TPU
Gopro Session 4/5 Mounts for Kayouloin. Category: 3D Printing
Kayoudur rear bumper. Category: 3D Printing
To increase clearance between the bottom of the frame and the floor
0.4g heavier than stock baby ratel 2 tpu The buzzer itself adds another 2.7g
HardCase pour Osmo Action 6 Kayouflip / Kayoudur Paramètre d'impression: 30-50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
This is a storage box designed for the Kayoumini , featuring an upper holder that can secure up to 8 batteries . The design was made using Flywoo Explorer 420mAh HV 2S 80C batteries , but other batteries with similar dimensions may fit as…
Salut a tous !!! Voici une version du kayoumini où vous pouvez rajouter une Runcam thumb pro Poids: babyratel 30° (3.05g) + runcam mount = 4.89g Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
Kayoumini Runcam Split 3 Light Category: 3D Printing
Wall stand for Kayouloin. Category: 3D Printing
Infill density : 15-20% gyroid
