1,948 models
Welcome to my design adventure! My goal was simple: design a car tray for eating/working that attaches to your car steering wheel; the catch: the final product print time should be less than or equivalent to ordering the equivalent tray…
Print approx. €40.45–€49.44 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to remove the radius overhangs on the print but realised the original STEP files were exports of the STL so I've exported clean STEP files as well as made my minor tweaks. Thread was changed to GL20 thread to hopefully improve…
Print approx. €4.16–€5.08 excl. taxPreliminary estimate for one variant
Nice and easy to print on vase mode with 2 or 3 outer layers (depending on the size) Material - any - we printed it using PLA :) Happy Printing!
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
I stacked 10 of the original honeycomb wall part on top of each other and separating them with a thin layer gap for easy separation. I also used ironing on each layer to make the separation of the pieces easier. The piece is turned upside…
Print approx. €48.28–€59.01 excl. taxPreliminary estimate for one variant
This is a printable model of a device which folds a 1cm Keder / Piping out of a 4cm fabric strip. It folds the edges to the inside and than folds it to a U-shape, so you can sew it to your fabric edges to prevent from frazzling.…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for PETGSource material: PET
This is stacked version of Prusa Protective Face Shield - RC2. I added only small pieces to support visor pins. The rest of Face Shield is untouched. Gap between parts is 0.3mm. Print instructions Supports are not necessary. Print with at…
Print approx. €4.20–€5.13 excl. taxPreliminary estimate for PETGSource material: PET
First modification on my rooftop tent. This little clip allows you to dry your clothes under your tent. I tested the clip in ASA PETG and CarbonfiberPETG, all materials stand our 3 week journey. !!You need to print it with 0.25 and 100%!!
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
This model uses a torsion spring to pull the head and neck back into the body. It is extremely satisfying to play with, and the model (at 100% scale) works great! I haven't had time to play around with the scaling, but I wouldn't go too…
Print approx. €6.07–€7.42 excl. taxPreliminary estimate for one variant
Naked Snake From Super Smash Brothers.
Print approx. €7.08–€8.65 excl. taxPreliminary estimate for one variant
Hey, After we have uploaded our Face Shield CS V2 you gave us great feedback. So now we present our 4pcs. and 8pcs. 4x stacked version. We have made a 3mf file with the right settings - especially for the transition between the two…
Print approx. €10.92–€13.35 excl. taxPreliminary estimate for PETGSource material: PET
Star Wars - Darth Vader Unmasked
Print approx. €6.36–€7.77 excl. taxPreliminary estimate for one variant
Hey, After we have uploaded our Face Shield CS V2 you gave us great feedback. So now we present our 2pcs. and 4pcs. stacked version. We have made a 3mf file with the right settings - especially for the transition between the two Shields.…
Print approx. €6.33–€7.74 excl. taxPreliminary estimate for PETGSource material: PET
This beaker mounts to the IKEA Skandis pegboard. The beaker has an inside size of about 16x50x114 mm³. It holds make-up articles like lipstick and eyeliner. It shall be printed with a flat side to the printbed. Support is needed for the…
Print approx. €4.00–€4.88 excl. taxPreliminary estimate for one variant
We got many messages asking for a stacked print for the 0.8mm nozzle. Because we had some problems with our model we redesigned the Prusa Faceshield Stacked and redone the print settings to make it work with 0.8mm nozzle. THE VERSION IS…
Print approx. €6.37–€7.79 excl. taxPreliminary estimate for PETGSource material: PET
This is a "lock" which means you can tell at a glance (just poke your head in the room) if the cage doors are completely closed. It's for piece of mind since otherwise to know the cage is fully closed you must physically tug on each door,…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
IMPORTANT UPDATE There is a newer version of the phone mount for VanMoof, which includes cradles for multiple phones and will be updated in the future. This version here will not see any updates in the future. You can find the newer…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
I saw that the screw holes on the TPU Chasis Front Bridge on my Cramer Truggy were getting a beating, so I thought I'd make a cover that would protect the screws holes and look good at the same time, similar to the rear spoiler. PS: I…
Print approx. €0.90–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
Wicked Tree Halloween Candy Bowl. ah … this is kind of a mess … ah shucks.
Print approx. €23.75–€29.03 excl. taxPreliminary estimate for one variant
Stargate Rings Puzzle - Blocked! I designed a Stargate Ring Platform for use in a game I am working on. After scaling the platform up, I realized this would make an interesting puzzle. This is the result of that effort. Puzzle concists of…
Print approx. €5.56–€6.79 excl. taxPreliminary estimate for one variant
Cracked egg for easter decoration, you can add some collorfull decorations in slicer or you can paint it but i like it natural white use petg for sure pla consume moisture BTW: i use full egg and modification for the crack design bcz i…
Print approx. €23.55–€28.79 excl. taxPreliminary estimate for PETGSource material: PET
Cracked Egg
Print approx. €3.00–€3.66 excl. taxPreliminary estimate for one variant
My PTFE Tube kept falling forward so I remixed the design to force the tube to rest against the frame. The arm should line up with the centre of a standard spool. Printed mine with PETG as that’s what I had loaded but PLA would work just…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Decorative Easter egg with a cracked shell look. The egg is designed as a hollow shell and has an cracked opening on the front. Ideal as an Easter decoration, for filling with small figures, sweets, or LED lights. No support required. The…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
A kohlrabi tag to label your vegetable patch. Part of a tag collection. Two versions (the gigant one is actually the same as the little one, just made wider, feel free to accommodate it to your aestetic needs). Three-colored (two switches…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
This heart box is made of a base, cover and ring that locks the top and bottom together. It says “My Valentine. You unlocked my heart .” The design concept for this is provided by V Murano on his Desktop Makes U-Tube. I modified his…
Print approx. €2.68–€3.28 excl. taxPreliminary estimate for one variant
This stacked donut planter combines a modern and simple design with an easy-to-print, no-support-needed, hidden drip tray. Available in four tested sizes (9 cm, 11 cm, 13 cm, and 15 cm), it caters to a variety of plant needs. While the…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
Overhangs at the bottom of the pot and poor drainage will be corrected in the future. →V1.1 Improved bottom. →v1.2 improved drainage. Supporting overhangs and drainage holes.
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for one variant
Print it upside down, some support for the lines and letters will not harm.
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
A Cracked Eggshell Decorative Holder crafted as a 3D printable product designed for those who appreciate the delicate beauty of nature. The holder consists of two parts: the base and the cover. The cover, inspired by the organic form of a…
Print approx. €2.80–€3.42 excl. taxPreliminary estimate for one variant
This one is similar to the previous LED lightbar which goes under the MK3S MMU, only this time the bar is mounted on the end of a 5mm x 250mm long section of gooseneck tubing. The gooseneck tubing itself comes from a PC mike stand bought…
Print approx. €2.49–€3.04 excl. taxPreliminary estimate for one variant
I loved squid games 2 so I made this mask so you can 3Dprint this hope you like it
Print approx. €8.83–€10.80 excl. taxPreliminary estimate for one variant
Magnetic mount for holding a Naked Juice Bottle Fruitfly Trap to a ferrous surface with a PS:1 logo.
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
These are custom cracked-style Dominator Titanium Top Bars designed to fit on drumsticks. I gave them a worn, aged look with subtle crack textures for that raw, used aesthetic. The surface features wave-like detailing and airflow holes…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
Newest Edit: 6-10-2024 New version follows the same concept as before but now the lid closes completely in both stacked and unstacked positions. Plus rounded edges for the little ones. Includes faster print time (albeit still takes a fair…
Documentation & Assembly Guide - Please Read! I've moved much of the documentation here. Many of your questions are answered here (or will be answered) as I fill it out. READ DOCUMENTATION HERE Status updates April 22, 2025 Rendered STL's…
Stacked version of the Prusa Face Shield - US version (RC3 version) A prototype face shield that we developed. This is a version for the US based on the community feedback, the design was adjusted to fit: American size sheet (11x8,5…
10/12/2022: Uploaded the correct nut and lead. The first ones were mirrored. The drill was inspired by push drills such as this one by LoboCNC: https://www.printables.com/model/132326-push-drill-with-adjustable-chuck The chuck is based on…
Introducing the ultimate reading accessory for book lovers: our cool bookmark with an attached STL file. Made from durable, high-quality materials, this bookmark is designed to last for years to come. The vibrant, eye-catching design will…
I really like the original cat key hook design by a-arruti , but I had trouble getting the lever to print right, and be strong enough to use. I looked through comments, and saw others were having the same trouble. I want to put several of…
It is that that time of the year again as the darkness draws nearer, and things begin to get a little bit… spooky ! A wee festive model kit of a wicked cackling witch upon her broom designed to be hung up, a perfect alternative gift to…
Wicked Skull Dice Tower. (UPDATED) UPDATED FILES: 4/28/2024 5:28PM CMT. NamingConvention: skulldicetowerfin (OLD FILES REMOVED) Thanks for your Input Raptor King. This is why I adore this community. Awesome feedback. New uploads have…
Beautiful low poly designer bowl that almost looks like a cracked stone. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL +…
WORK IN PROGRESS First, I want to thank 86duino the original author for his excellent work, we can find it on cults and thingiverse . I really like the work done but the watermark completely “distorts” Mario...so I made the following…
This is a Fusion template for creating stacked gridfinity grids. These grids are symmetrical top-to-bottom, so they stack easily. Use Modify→Change Parameters to change the size of the grid and the number to stack. Grids are stacked with…
I liked the original design but found three issues. First the holder is too shallow for bigger soaps. Second the filler just sits freely and is easily flipped when I pick up the soap. Third the flat bottom is too slippery on flat wet…
I remixed the Precision Tweezers by M4NU to a cranked version. For that I chopped off the folding mechanism and added the 45deg angled legs. The folding mechanism is ideal for remodeling the legs and also in terms of “printability”…
Build Guide Bill of Materials FAQ Open Beta Fileset (not all components complete) Buy hardware or printed parts at SilverFoxIndustries A spiritual successor to the Gryphon, though not a replacement. Leaning further to the direction of…
These are 2-, 4-, 6-, and 8-stack versions of the HSW 211x248 wall panel. Print at 0.28 layer height with 5+ perimeters to avoid infill. There is a one-layer separation between each panel. Import the STEP file to your slicer, split the…
I created the stacked version of the HSW for print with less downtime. The total print length is 9,5h on Bambulab X1E with AMS on normal speed settings. DON'T change the settings. Use Support for PLA filament or water soluble filament for…
The source marked this model as adult content.
remix of suprised halloween ghost
I'm pretty happy with my new Creality Ender 3 V2 Neo, though in a short time (like 2 weeks of usage) fans started to produce funny noices. Taking to account, that original fan casing hides both fans and it's impossible to see if they are…
Please refer to https://www.printables.com/model/581649-elegoo-neptune-44pro-cable-chain and https://www.printables.com/model/596277-elegoo-neptune-44pro-cable-chain-new-90deg-mount-z/files for the full set of files you need to print for…
Solidworks model for a parametric stacked wave spring. I couldn't find a satisfactory wave spring model in Solidworks, so I made my own. It will be used in a future design. In theory it should work for extension & compression; my…
Brim-Yes Supports-Yes Layer 0.2mm Printed from PCCF, it makes a good sound, almost like metal, but PLA is good as well.
This is how it works: Numerous modifications have been made to achieve a higher chance of a rolled Six. First, the side opposite the Six (One) is fully filled and therefore heavier than the other side. Second, the edges on the One side…
Straight from the Jurassic, here comes Stego—the cutest herbivore to ever wobble through time! With its iconic plates, chubby shape and gentle face, this speedy print is perfect for dino lovers and desk decor fans alike. ✔ Pochissimi…
Last Update: 2024-20-03, Updated files for 11/32 SAE Wrench Holder, previously there was a very rarely provided 7/32 SAE Wrench, I have left this in the STL files but removed from the 3D Model Files. I also corrected incorrectly…
This is Hooky the funny, helpful multifunctional snake hook I designed it for multiple use cases for my Ford Nugget Fiamma F45s awning, where it does a great job. It fits in the 7 mm Keder rail and locks itself under load. It is very…
Hello everybody, this is a collection / remix I did around christmas as a gift. I basically started off with the stormtrooper head https://www.thingiverse.com/thing:4267739 as kalunho3d's description supposes I used the hands and rod from…
For FDM printers Supports: Yes (organic) Raft: Doesn't matter Nozzle: 0.4 Layer: 0.2 Infill: 15-20%
The injector design from @uepsie, which I received when I ordered the Zaribo 320, is pretty good. Just the thread wasn't perfect for the tube from Super Lube. So I reworked it. Now it fits real good! :) I hope you gonna like it. Please…
I used PLA, all your favorite flow cals etc should work great, I did mine at .2 layer height with a .4 nozzle. Your slicer will show errors, do not print with supports. The layers “floating” is why they come apart so easily.
This version has the top half reworked to be much easier to assemble. I have also included print files. The body has been modified to support the 6x3mm magnets (you can remove this modification in the print file to revert to the smaller…
Gridfinity Tweaked Licence Creative Commons with Attribution 4.0 See: https://creativecommons.org/licenses/by/4.0/ Full text in LICENSE file included. Author: Tim Watts <[email protected]> Copyright: 2023 Source code: Gitlab This aims…
Subscribe Now! -lapse print video : https://youtu.be/Mpftevek_fM Remix to support free and printed. Subscribe to find out more support free 4K Time-lapse video: Subscribe Now!…
This was a lot of fun to remix I learned how to use several things I had never used before in Blender and I have already been asked print several of these. UPDATE 11-17-2019: Layed the models flat on the build plate for better adhesion.…
You can find this print from a creator on thingaverse. I only modified it a little to be larger and function better with a couple more pens in the holder. I recommend printing with Black PLA at 15-20% infill. Maintain all the same…
A tightly wrapped person Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. Print video: Cloaked man - supportless FDM print - YouTube NOTE other…
Want a commercial license to sell my prints? Join as a member to my Patreon https://www.patreon.com/c/Salvadori3DArtworks or my Thangs https://thangs.com/designer/Salvadori3D Hey everyone! This little guy has been sitting on the back…
Cracked D&D dice set (D4, D6, D8, D10, D12, D20) fixed and optimized for printing
This is an adhesive backed cold shoe mount. Can be used to place camera and microphone gear that utilize cold shoes anywhere you can get 3M VHB tape to stick. I specifically made this to mount a Deity V-Mic to my primary workstation for…
I reused the idea from brimstone326, see the original thing here: https://www.thingiverse.com/thing:4725342 I like the idea my kid can insert a Pokemon card inside the Pokedex so I just extend it about some other features and the Pokedex…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. The model…
This model represents a level five iteration of the Sierpinski Pyramid fractal. Instead of being made up of individual octahedra, it’s constructed from a unique shape with extra faces, creating a bold, wicked appearance. This version…
Gate and Arch - No Supports: https://www.printables.com/model/436334-medieval-palisade-gate-arch-print-in-place-no-supp Matching Wall Set: https://www.printables.com/model/435566-medieval-palisade-wall-set Lookout Tower…
Customizing the model: If you want to customize the model, i have provided two user-parameters in the fusion-360 file: Socket clip diameter and socket y offset to change how far into the lamp your light goes (see photo). If you want to…
Roller with spikes. An safe way to get some sensory impulses. fully insired on https://littleouchies.com/ so if you have the money please order one from them. Not expensive! Print without support. Layerheight not important I included the…
Stacked Gridfinity Grids with modeled support
This is a rework of a 3d scan of the Virgin Mary a seen in Lourdes. Reworked a little. very cool in pop colors. A nice touch of grace in a cool deco. Printed in adaptative layers to be fast but very precise on the hand and face. Fast and…
UPDATE: I've seen your comments about issues with printing the 2 halves. I've designed new versions with better structure connecting the parts. I hope these redesigns work better! Replica of Mjolnir as appearing in Thor Love and Thunder.…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint
Edit: Added v4 lid which now has nubs for easier turning, as a few have suggested. I didn't see any remixes yet so I added this one myself :) I noticed that the original model had a tendency to come undone and you can't really see what's…
Spinny, the strip cutter.
Die Anregung für den Starlink Kederleisten Adapter kam durch Gogo 4 Camper. In seinem Video hat er einen Starlink Adapter für seinen Wohnwagen vorgestellt. Dieser passte auf unseren Wohnwagen gar nicht. Von seinem Adapter ist nur noch die…
We are soon launching a KICKSTARTER ! Assembly documentation can be found here: https://outofmarbles.com/pages/docs This is the hand-cranked version of our bucket lift. Check our other models for motorized version. You will also need to…
3D Model Of The Iconic Linked Sword On Roblox. Enjoy!!
Keeps annoying wasps and flies away
The Wicked Ring. Designed using Stable diffusion produced images to use as uv maps.
Happy Thanksgiving/Merry Christmas my friends! Just a fun little turkey kit for you all. Prints quick so get a production line going and hand them out to your friends and family! Not really much else to say about this one... it's cute I…
A wire-spoked wheel modeled in Fusion 360. It is a scale model of the Borrani wheel for Alfa Romeo 2600, in a 1:18 scale (although it is not 100% accurate). Featured in the Prusa Academy Fusion 360 online course. Intended primarily for an…
Fixed solid holes on mount Please refer to https://www.printables.com/model/631300-tweaked-cable-chain-mounts-for-elegoo-neptune-4 for additonal parts. I only created to fix the missing holes on the mount.
The source marked this model as adult content.
![Phone Mount for VanMoof S2/S3 [Legacy, newer version linked in description]](https://media.printables.com/media/prints/41892/images/418608_27bb6a0e-767c-4f68-becf-206b6da75dc2/vanmoof_s2_smartphone_mount_2020-oct-02_09-28-49a.png)
