Counting matching models…
I could not find a zero clearance insert for my 2023 Metabo KGS 216 M as the old versions differ. I have included both the entire model as one piece and a version consisting of 2 parts for printers with a smaller print volume. Print the…
Zero Clearance insert for Metabo KGS 254m You need both part 1 and 2 plus 2x 5x20 mm sylinders to mount. Use original screws to mount
I love my Metabo KGS 216 M Miter Saw, but it takes up too much space when not in use. I wanted a storage solution to mount my saw to the wall vertically. I modeled these custom wall mounts to do just that. These mounts have been in use…
Couldnt find a model for the Metabo KGS216M so i made one. Did not fit my printbed so it is split in Part1&2. The full part is also uploaded if it fits your printer bed. Just print, install and cut a groove using the saw.
Same model but in one piece, for larger build plates.
Adapter to convert the Metabo KGS254M Miter Saw dust extraction port to camlock, for use with Peter H's Camlock connector Kudos to Peter for providing design dimensions and helping me out. Printed in Prusa Basic White PLA with 0.2mm layer…
Adapter für Kärcher-Sauger WD-Modelle https://www.printables.com/de/model/251437-karcher-wd-vacuum-cleaner-adaptor Adapter für Kärcher Sauger alte Pro-Modelle: https://www.printables.com/de/model/251475-karcher-wd-pro-vacuum-cleaner-adaptor
An adapter to connect the pipe of the vaccum cleaner to a Metabo KGS 216 M crosscut saw. Diameter vaccum cleaner: 35.7 mm Diameter saw: 41.5 No supports needed Category: Machine Tools
Replacement insert (sacrificial board) for METABO KGSV 72 Xact SYM crosscut miter saw. As a spare part or as a tuning, because: No sacrificial board required in contrast to the original, a tear-free saw cut as this insert is closed.…
Das obere Teil wurde aus PLA gedruckt, ggf. wäre hier PETG nicht verkehrt. Das untere Teil kann an das Oberteil angesteckt werden und wurde aus TPU 95a gedruckt. Mein TPU war leider etwas feucht und es wurde zu langsam gedruckt, deshalb…
A german translation can be found after the english one And another adapter for the Metabo KGS216 to osVAC M32 ... :-) There are already one or two models for such an adapter, but somehow I couldn't find the right one for me. Sometimes an…
I needed to learn my Metabo KGS 254 miter saw how to connect saw dust extractor using a DeWalt Airlock adpater. That's why I created this reduction.
Based on the excellent model of the Festool Cleantec adapter from PwnCNC, I have adapted the model to fit the extraction socket of the Metabo KGS 216 M.
This lever (on off switch) broke and this is a replacement parts could fit others Metabo as well: KGS 216 KGS 216 M KGS 254 M KGSV 216 M KGS 305 M KGS 18 LTX 216 Printed in PLA with 6 walls, 6 top, 6 bottom layers in 0.4mm nozzle with…
Můj návrh pro redukci hadice z LIDL vysavače průměr sací hadice je cca 34 mm a výstupní roury na pokosové pile průměr cca 41 mm sedí perfektně. Tisknuto z PLA bez podpěr
My KGS216M is an older version with different shape than the current version.
TL;DR Press-fit so you won't lose them (again), use (plastic) hammer with care Used filament: PLA(+) Infill: 30% gyroid Layer height: 0.2mm Notice: Will probably cause scratches on worksurfaces if you use hard filament. Use at your own…
Spare part for Metabo KGS 254 (thing it will works with 216 or 305). It si holder for laser. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 50% Filament:…
Metabo KGS 216 M side rails spare part model. My miter saw is model No.19260000, so if your miter saw is about the same model number, these should fit. In addition of .stl model I added the .step model, modify as you want. (I can send the…
This is an adaptor to connect the Metabo SPA 1200 dust extractor to the KGS 254 M Miter Saw Category: DIY
Are you tired of adjusting the Prusa Mini spool holder size when swapping from 1KG to 2KG spools? Then this is the spool holder for you! This stand can accommodate up to 2KG spools and is easy to swap out. The angled ends of the beams…
Replacement for Metabo Mitre Saw Guard Release Lever KGS 216 - all variants. Printed in PETG - use appropriate material. Use at own risk. Printed and tested for +months. No issues or wear.
Kabelhalter für Metabo KGS 305M um dickeres / längeres Kabel aufzuwickeln. Nachdem ich ein 5m H07RN-F Kabel montiert habe, reichten die originalen Halter nicht mehr.
Secures Flange
Adapter innen 45,5 auf innen 34,4 mm gedruckt in TPU, hochkant drucken Adapter 45.5 mm inner diameter to 34.4 mm inner diameter Printed in TPU, print vertically
Tiskl jsem v PLA výška vrstvy 0,13 segmenty 3 a hustota 18 bez podpěr..
I made this vacuum adapter for my Metabo KGS 216 to fit the big attachment with 46mm outer diameter of my Makita VC2512l vacuum. Beside this it holds the vacuum hose in place while rotating or cutting. Before it was hardly possible with…
Part numbers: BMW: 63117348932; 63127270076; 63117204272 Mercedes: 0008264324; 0008268124 Volkswagen: 5C7941607B
The lever from the Atika KGSZ 210 chop and crosscut saw was broken. No new part from the Manufacturer was available, so
Spareparts for my old Westfalia KGS1100 mitresaw. More specific the mittle part, that protects the saw table from the blade as well as the angle indicator. I will update this when or if I build more spareparts
Connecting the Metabo KGS 254 M Miter Saw dust extractor to CAMLOCK for use with my shopvac.
I made this vacuum adapter for my Metabo KGS 216 to fit the big attachment with 46mm outer diameter of my Makita VC2512l vacuum. Beside this it holds the vacuum hose in place while rotating or cutting. Before it was hardly possible with…
An adapter to connect the pipe of the vaccum cleaner to a Metabo KGS 216 M crosscut saw. Diameter vaccum cleaner: 35.7 mm Diameter saw: 41.5 No supports needed Category: Machine Tools
Je me suis inspirée de ce modèle pour créer ce porte-bobine de filament 2kg Prusament, il est adapté à la largeur d'une bobine et tient sur le plateau de la MK4. Il est composé de la base (en une seule pièce), d'un axe et de 2 rondelles…
