Counting matching models…
Please check your roll size before printing. My roll diameter is about 10.6 cm. If this is to small you can rescale the model in the slicer program I recommend to set supports just under the free arms (use support-blocker at other parts)…
Your very own piece of the Eras Tour, inspired by the Folklore Cabin. The top slides off, making it easy to store friendship bracelets inside. There are two versions: one with a nail nick to remove the roof more easily, and the other…
For those that don't know, during The Eras Tour at some point Taylor sits on top of a wooden cabin with a moss covered roof. It looks quite similar to the small nativity set we've had for years. So naturally I made a way for Taylor to sit…
Made this for my girlfriend to add a little decoration to her calendar. It is the title of the album, which the photoshoot for the calendar was done for, in a similar font as the original. The print is a little thin to be made with a…
These are gasket mount case designs with optional tenting for KLOR. All four variants are supported. The top and bottom pieces fasten with 6mm x 3mm neodymium magnets. The optional tenting fastens via M3 heatset inserts. The lid pieces…
Hueforge print of Taylor Swift's folklore album cover. Print at 0.08mm layer height, 0.16 base layer height., 100% infill. Filament Colours Used: PLA Matte Black PLA Grey PLA Light Grey PLA White Swap Instructions: Black until layer #6 at…
Here lies Hotend Harry, Nozzle Neal and Extruder Earl, Three former nonfictional characters from hobbys' past who enjoyed this hobby maybe a tad too much and had their demise accordingly. Folklore has it that they continue to haunt makers…
Taylor Swift album folklore, CD holder wall mounted
Support for the album Folklore (Taylor Swift) Printed in PLA, with support, and a filament change.
Right now it is just a solution for storing and sorting the monster/hero/ally/affliction standees for all the Folklore the Affliction releases (the base game, Dark Tales and Fall of the Spire expansions). I plan to expand it to the full…
Lithophane I made using the online lithophane tool, https://itslitho.com/ I had the settings adjusted so it had a width of 100mm, but there's not much fine detail on smaller areas of the image, it was fine for our purposes, though. If…
Da ich in meinem Bad sonst kein Platz hab, habe ich mir diesen stabilen Klorollenhalter gezeichnet, und gedruckt. Durchmesser der Heizungsrohre 23mm ( Zehnder Heizkörper ). Gedruckt mit PETG, 25% Infill, 0,3 Draft. Die beiden großen Teile…
Show off your new keychain that others will be admiring! This keychain was inspired by traditional Slovak folklore pattern on the dresses, pants, etc. ~ enjoy ~
Please use all parts from the original model and print these files to use M3 screws. The cariage model used for the modification is the tight fit one.
A storage solution for Folklore The Affliction and both expansions (Dark Tales and Fall of the Spire). Has a box to store all the standees. It does also include space for the World Events, Crafting & Recipes cards, Adventure Creation Kit…
it was made for my hacklord costume but i posted it just cuz btw if u dont know size it to ur head it does NOT come in the size ur head is also remix it or not idc
Made this folklore inspired planter to fit small shelves I have at home. Pattern is inspored by house paintings and embroideries from Čičmany . I have issues printing right outer corner of tray properly and so far I did not find reason…
Sharing an edited version of GEIST's Klor Konrad keyboard case for my personal Klor choc build with keywell adapters. Keywell adapters by github.com/Rookwork/Voyager-keywell-adapters Choc pcb version of the Klor made by…
Dazu muss man nicht viel sagen- Um das ganze in der Mitte zu halten habe ich am oberen Rohr O-Ringe verbaut.
A classic Jiangshi “hopping vampire” inspired by Chinese folklore, posed with stiff arms and eerie presence. Designed as a striking monster statue for horror-fantasy collections, folklore displays, or spooky tabletop scenes. Perfect for…
This is everything needed to create a gingerbread house inspired by the Taylor Swift's Folklore cabin. The front and back are fully printed because I was worried about them being structural with gingerbread. Everything else is made with…
Folklore CD holder wall mounted, Taylor Swift album
Taylor Swift Folklore Album Hueforge! Print at 100% infill with a layer heigh t of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is…
These detailed miniature shoes are inspired by traditional Opanak , the iconic folk footwear from the Balkan region. They are designed as decorative pieces – perfect for hanging as wall decor, window ornaments, cultural displays, or as a…
Bring a dramatic, mythological touch to your festive display with this imposing 3D printable Devil figure! 🔱😈 This horned figure, cloaked and holding a trident, is often associated with the darker side of Central European winter folklore…
Der Magnet den ich verwendet habe hat einen Durchmesser von 25 mm .
Jednoduché puzzle z 12 dílků, které otestuje vaše logické myšlení. Tisknou se různé barvy v různých vrstvách, viz. obrázek.
If you’re still living in the folklore era (honestly, who isn’t?), this one's for you. I designed this HueForge bookmark to capture that misty, ethereal forest vibe from the album cover. It’s got that grainy, high-contrast look that feels…
Strigoi bust A strigoi — the vampire of Romanian folklore, the one the villagers dug up and staked — as a small bust for a shelf. Gaunt skull, deep-set eyes under a heavy brow, hooked nose, ears swept back to points, and a jaw hanging…
A classic Jiangshi “hopping vampire” inspired by Chinese folklore, posed with stiff arms and eerie presence. Designed as a striking monster statue for horror-fantasy collections, folklore displays, or spooky tabletop scenes. Perfect for…
These detailed miniature shoes are inspired by traditional Opanak , the iconic folk footwear from the Balkan region. They are designed as decorative pieces – perfect for hanging as wall decor, window ornaments, cultural displays, or as a…
If you’re still living in the folklore era (honestly, who isn’t?), this one's for you. I designed this HueForge bookmark to capture that misty, ethereal forest vibe from the album cover. It’s got that grainy, high-contrast look that feels…
Der Magnet den ich verwendet habe hat einen Durchmesser von 25 mm .
Print instructions material: PET-G is strong enough, ABS would be better, NYLON is the best infill: 100% for PET-G suports: yes layer: max 0.2 mm Print all parts in horizontally, all layers must be in 90° to the longitudinal axis to avoid…
Hallo Maker, hier eine Klorollenbox, für alle Wanderer, Camper und Freunde eines Aufgeräumten Bades. Die Box ist aus PETG also perfekt auch für feuchte Räume. Viel Spaß damit
Your very own piece of the Eras Tour, inspired by the Folklore Cabin. The top slides off, making it easy to store friendship bracelets inside. There are two versions: one with a nail nick to remove the roof more easily, and the other…
Da der original Klorollenhalgter immer wieder bricht, habe ich einen Ersatz konstruiert. Am besten liegend mit etwas Support drucken. Since the original toilet roll holder keeps breaking, I have designed a replacement. It is best to print…
Simple remix of VOID's SAEGEWERK Redux case, with the top main top plates edited to feature the KLOR logo. Available both as a multi-color print file as well as simple cutouts as seen in my KLOR video.
Print instructions material: PET-G is strong enough, ABS would be better, NYLON is the best infill: 100% for PET-G suports: yes layer: max 0.2 mm Print all parts in horizontally, all layers must be in 90° to the longitudinal axis to avoid…
Hallo Maker, hier eine Klorollenbox, für alle Wanderer, Camper und Freunde eines Aufgeräumten Bades. Die Box ist aus PETG also perfekt auch für feuchte Räume. Viel Spaß damit
For the details look into original model. Klor keyboard has 4 variants. The Redux case is designed for SAEGEWERK version. This is the remix which fits Klor Konrad. Any missing parts can be found on original model. It is for Bluetooth…
Paranormal Mystery Art - Cryptids - Alicanto of Chilean Folklore 3D printable model.
Folklore (by Taylor Swift) Lithophane made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
Description Language: DE, ENG, FR, CZ Configurable: YES CAD Program: FreeCAD V2 empfohlen; recommended; recommandé; doporučeno DE Klorollenhalterung Abdeckung. Im FreeCAD leicht konfigurierbar ENG Toilet roll holder cover. Easily…
1.5mm thick. print using your favorite plastic. I recommend PETG but any plastic will do.
