Counting matching models…
Just a simple clamp to "get a hold" on the Vorwerk Kobold 300s vacuum arm. The inlay of the clamp is coated with foram. The clamp itself is fixed with long M3 screws (but also can be customized). Foam:…
I have bought a Makita battery powered vacuum since I already had the batteries. Since I have a lot of Vorwerk accessories I needed an adapter but none of the available ones would fit. Therefore I combined the models by parkis and…
Replacement for the upper cable hook of the Vorwerk Kobold VK130/131 vacuum. Part optimised for printing; print as shown below:
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
A kobold with a pickaxe Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE Other kobolds seen in…
Support me on Patreon! https://www.patreon.com/printedencounter
My take on the Pathfinder Kobold uses trademarks and/or copyrights owned by Paizo Inc., used under Paizo's Community Use Policy ( paizo.com/communityuse ). I am expressly prohibited from charging you to use or access this content. My take…
32mm scale miniature for tabletop gaming. Support on Patreon: https://www.patreon.com/printedencounter
A winged kobold remix made in Meshmixer, using Schlossbauer's Kobold and Planar_dragon's dragon wings. All rights belong to the respective authors, I merely combined the two. Print Settings Printer: Elegoo Mars Rafts: No Supports: Yes…
32mm scale miniature for tabletop gaming. Support on Patreon: https://www.patreon.com/printedencounter
A enemy for Tabletop. Category: 3D Printing
32mm scale miniature for tabletop gaming. Support on Patreon: https://www.patreon.com/printedencounter
32mm scale miniature for tabletop gaming. Support on Patreon: https://www.patreon.com/printedencounter
32mm scale miniature for tabletop gaming. Support on Patreon: https://www.patreon.com/printedencounter
A enemy for Tabletop. Category: 3D Printing
A enemy for Tabletop. Category: 3D Printing
A enemy for Tabletop. Category: 3D Printing
A enemy for Tabletop. Category: 3D Printing
Here are the Player Characters from "The Last Heir", a streaming DnD game that's pretty fun to watch and plays Sunday evenings. Follow here for more details: https://m.twitch.tv/koboldpress/profile Want to access even more models not…
I printed it with a Bambu P1S out of PETG without support in 1h47min. (standard PETG settings) The high version is 45mm wide - 42mm high -95mm long and the lower one is 32mm high. At the picture where its shown at the wall i used the HIGH…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Gain access to pre-supported files & more by supporting me on Patreon!
A enemy for Tabletop. Category: 3D Printing
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models and that I make random minis for people then come follow and support me on Patreon https://www.patreon.com/c/Adamnant - where you can ask me…
Cannon stand is a remix of this model here: https://www.thingiverse.com/thing:338952 Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page…
A kobold perfect for the dragon minions that we all need. Prints well as is with supports and a raft. Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
A enemy for Tabletop. Category: 3D Printing
my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.16 - 0.2 Walls: 2 Infill: 5% Material: Brand: GraKit Material: PLA Color: Tri-Color Black/Gold/Red printed on Creality Ender 7
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Gain access to pre-supported files & more by supporting me on Patreon!
Kobold of the jungle! Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://mz4250.com/ Patrons have access to all my files in one place, a request…
A Kobold female. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
A enemy for Tabletop. Category: 3D Printing
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://mz4250.com/ Patrons have access to all my files in one place, a request…
The Modell is a Remix for FDM Printers it s Based on the KOBOLD Colaction from MZ4250 here on Printables SEE his colection of nearly 2.000 STL the Modell is optimised to 0,2mm Layerhight for DaD use 0,1mm Layerhight and 0,5SCALE on your…
Wallmount for vaccum cleaner Vorwerk Kobold VB 100 I used an TPU filament for the black rubber insert. Just superclued it inside the groove. I will also relase a model without groove in case you do not have any TPU, but to be honbest the…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Should have a snug fit on your charging adapter. Holes 5 mm for countersunk head screw. Tight the screws by hand. A narrow gap between this part and the wall is provided to press the charging adapter securely against the wall. My Print…
Easy to print kobold necromancer for TTRPG (DnD) Should work with both 0.4 and 0.2 nozzle, but I recommend the later. There are 3 versions: 25mm base, 28mm base and full size. I have fixed the crystal so it's not suspended in the air.
A buncha reptilioid-style kobolds for all your player harassing, dragon worshiping and trap setting needs! These will print support-free so have fun and happy printing! EDIT: These have a little bit of sag in a few places so I'm not quite…
Ich habe für das Modell weißes PLA Filament verwendet! Mit Glow-in-the-dark Filament sieht es nachts bestimmt super aus! Druck: Düse 0,40 mm Schichthöhe 0,2 mm Im Prusa Slicer die maximale Druckgeschwindigkeit auf 80 mm/s…
A wallmount for the Vorwerk Kobold vacuum cleaner attachment set. Unfortunately looks like Vorwerk sells well thought out Devices but doesn't waste one thought on how the accessories could be stored properly. I only used some few supports…
Had to modify Jcjames design for it to fit on the t track of a Kobolt 10in table saw.
Here is a winged kobold / dragonspawn model. I have it in in both 20mm and 32mm and I added a variant with a shortened tail (in case the long tail trailing off the baseplate isn't your jam). I printed the 20mm version but may still print…
Falls der Kobold Einzug halten soll, noch einmal Fußabdrücke als Schablone. Mit Fensterschnee, Zucker oder Mehl kann man mit der Schablone Abdrücke vom Kobold oder Wichtel herstellen. Bringt kleine Kinder zum staunen, wenn dann auch noch…
Here is how you should do it…… 1. Download the Model 2. Print the Part 3. Screw it to the Wall 4. Make your Wife happy and and explain her that 3D Printing is very very unsefully!!!!! 5. Try to buy a new Printer without getting divorced……
👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models come follow me on Patreon https://www.patreon.com/c/Adamnant for updates and exclusive minis. Here is another model from my list off of…
This is my take on a Kobold Rogue. You might need to resize this model to fit your RPG needs. This is my take on a Harengon Barbarian. You might need to resize this model to fit your RPG needs.
Kobold Rogue, a sniper wielding heavy crossbow. By default the model is scaled to fit with other 28-32mm miniatures. Printed on an FDM printer without issues and no supports. If you like the model and want to support me, and have access…
Antriebsrad für einen Kobold PB440. Bei unserem Kobold PB440 (Polsterboy) war das Zahnrad welches die rotierenden Bürsten antreibt abgenutzt und ist nur noch durchgerutscht. Da ich es nicht als Ersatzteil gefunden habe, habe ich es…
This is my take on a Kobold Ranger. You might need to resize this model to fit your RPG needs. This is my take on a Harengon Barbarian. You might need to resize this model to fit your RPG needs.
This is my take on a Kobold Barbarian. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…
This is my take on a Kobold Paladin. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…
Kobold Warrior - Print-Ready Miniature by Mike Gyver Minis! ⚔🎲 Unleash dungeon chaos with this cunning Kobold Warrior, sculpted in a dynamic pose clutching a jagged shortsword with his sling at the ready. ⚔ Expand Your Forces Looking for…
This is my take on a Kobold Artificer. You might need to resize this model to fit your RPG needs.
This is my take on a Kobold Druid. You might need to resize this model to fit your RPG needs. This is my take on a Harengon Barbarian. You might need to resize this model to fit your RPG needs.
This is my take on a Kobold Cleric. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…
Cookie cutter for the logo of the "Jupfis" (a goblin or "Kobold") at the German scout association DPSG. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA Blue
Kobold Shaman wielding a sickle, a scavenged spellbook, and a threatening bone helmet. By default the model is scaled to fit with other 28-32mm miniatures. Printed on an FDM printer without issues and no supports. If you like the model…
Because the accessories for the Vorwerk Kobold VT-300 vacuum cleaner are very expensive and we have a lot of accessories for our Miele vacuum cleaners, it was obvious to create an adapter. This allows us to use the Vorwerk Kobold with its…
This is my take on a Kobold Gunslinger. You might need to resize this model to fit your RPG needs.
This is my take on a Kobold Monk. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
This is my take on a Kobold Warlock. You might need to resize this model to fit your RPG needs.
Cable holder for a Vorwerk Kobold vacuum cleaner. My design is rotable like the original. Fits for following Vorwerk models: - Vorwerk Kobold VK 135 - Vorwerk Kobold VK 135 SC - Vorwerk Kobold VK 136 - Vorwerk Kobold i31 Printing:…
This is my take on a Kobold Bard. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Easy to print TTRPG (DnD) player character of a Kobold Swordsman. Works well with 0,2 and 0,4 nozzle.
A supportless model of an undead kobold. Perfect for a necromancer's summon or as an uncommon enemy! By default the model is scaled to fit with other 28-32mm miniatures. Printed on an FDM printer without issues and no supports. If you…
Stačí tisknout z pla 100% výplň
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
The dirtbin by LazyOdin fits perfect in my VR100 robot but looks a bit strange. That's why I added a lid to cover the whole bin bay. Like the source by LazyOdin it also uses the roomba 880/900 dirt bin filter. Edit: After four months of…
Kobold Snowball - Print-Ready Miniature by Mike Gyver Minis! ⚔🎲 Unleash frozen chaos with this mischievous Kobold, captured in a dynamic pose with a massive snowball hoisted overhead and ready to launch. Perfect for winter campaigns, this…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Every problem has a solution. Sometimes that solution explodes. This Kobold Artificer is a heavily detailed fantasy inventor packed with enough tools, gadgets, potions, and questionable engineering to outfit an entire adventuring party.…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
a concept stage 15% scale model of my F-210 Kobold design that is planned to be turned into a working rc plane later. cut int the middle for printing.
cut flange to 3mm thick vs original 4mm, bolt heads may need to be ground thinner
Falls man die Akkuhalterung nur hinstellen möchte, habe ich ein weiteres Modell ohne Bohrlöcher hinzugefügt. Infill: 20% sind mehr als ausreichend, reicht evtl auch weniger. Auf den Bildern habe ich es in 0,28 gedruckt.
Vacuum cleaner Cable holder for the Vorwerk Kobold i31, ours was broken. The original is rotatable, my design covers that.
A vacuum robot is a great thing and ours is so flat, it can even go under the couch. Unfortunately it won't find its way out and will get stuck, so I had to design an extension to the turret, so the safety switch will tell it to turn…
