Counting matching models…
There are 2 versions of the bottle cap. V2 is a little more solid and grips better than V1. V2 MIGHT be a little too tight for small kids…but that also depends on your choice of material. Material used: Filatech FilaFlexible40, blue…
Update 28.07.2025 Recently change my printer and was now able to print a 7x7 plate. Added the lighweight with connectors model some seconds ago! Update 17.12.2024 Added model with connectors. Build the size you want or extend it! / Model…
Aus TPU drucken (denkt dran, den Retract / Einzug auszuschalten) Vorteile des Flaschen Korken + Schutz vor Bienen + Kohlensäure erhalten + “Welches ist meine Pulle” + Schutz vor K.O. Tropfen!? TikTok Video dazu:…
Kluczyk do zastosowania z kluczem 13mm lub grzechotką ¼"
Der seitliche Befestigungsclip der Abstützung war leider gebrochen, ich habe es als Ersatzteil nachgebaut. The clip of the side Loop Support was broken, with the modell its easy to replace it.
It contain for all Filament Prusa Printers a gcode and the normal stl.
Bottle Cap Treasury Introducing the Bottle Cap Treasury – your perfect companion for the fascinating world of bottle cap collecting! This storage box seamlessly blends appealing design with high functionality and has the capacity to house…
A a new Idea for your household or as a replacement for a broken lid to make a second life for the jar possible. Tested and suitable for €uro coins. If you are interested in the surface pattern and how you could spice up your prints:…
Inlay für Kronkorken um einen 8x3mm Neodym Magnet wir z.B.hier: https://amzn.to/2FPV8sI anzubringen. Kann als Pinnwandmagnet oder für Kühlschränke verwendet werden ;) Print instructions Category: Organization Print Settings Printer Brand:…
The possibility of a support in the middle.
I needed a "holey" lid to accomodate an air lock for my jars. After browsing various collections without finding what I needed I measured an existing glass lid, drew the profile in Fusion360 and rotated id around the centre hole. It's not…
Sýkorky / Tits 20cm, 10 cm, 5 cm - two colours
Ich habe einen Ring entworfen um ein Hygrometer in einem Ikea Korken Glas Unter zu bringen. Der Ring sollte mit den Gläsern der Größe 0,5L - 2L Kompatibel sein. Ein Boveda mit 30g lässt sich ebenfalls im Deckel unterbringen. Gedruckt in…
Karaffendeckel Ø67 Außen, Ø63 Innen, 6mm Höhe I made it with ASA, but PETG should be also good.
Simple decorative object for new year's eve. Life-size cork with a clover leaf (with or without year date)
I really loved DerBeckhausBehncke space saving design solution for his WECK sprouting jar. It just takes up a minimal footprint in my already overcrowded tiny kitchen. But I didn't have any WECK jars nor metal mesh, so I decided to work…
A Idea for your household or as a replacement for a broken lid to make a second life for the jar possible. Tested and suitable for €uro coins. The Funnel was inspired by a classic offertory box, but with some optimizations for printing…
A little fidget toy that can be printed in under 1 hour and my first published model. It can be spinned around or you can rotate the two halfs in one hand. The sound can definitely annoy your friends. I hope you like it
English: This thing has a 100x15mm round ferrit-magnet inside. It's designed to catch bottlecaps falling down when using the wall-mounted bottle opener. It collects the bottlecaps - so it's a bottlecap collecting-point and has to look…
I had a lot of different varieties of chili sauce to label, so I came up with this design. It's customizable so you can put your own text on it. Or simply print the plain .stl file and use a pen. These jars aren't exactly produced with…
The logo is not in he stl model. Modell ohne Logo. Material: Flexfill 98a
Hi, wenn ihr für ein Geschenk leere Glasflaschen wieder mit alten Kronkorken verschließen wollt, klappt das hiermit recht einfach. Das Innenleben braucht ihr 3 mal. Die drei Teile werden mit einem Gummiband zusammen gehalten und kommen…
Use these covers to identify your IKEA Korken jars . We made them especially for distinguishing salt and sugar, but there's also a file with no text, so you can add your own label using PrusaSlicer 2.6+ (check this video from CHEP for a…
Each holder fits 4 mason jars with a diameter of 11cm (e.g. IKEA KORKEN 2l). Usable for sideways or upright storage. Multiple holders can be stacked vertically or sideways using the interconnector in the slots on all for sides. The…
The model This is a vertical storage solution for organizing and displaying IKEA Korken jars. It has three levels of rows, and the number of columns is configurable, you can print any number of columns that you want. This is made for the…
Abdeckungen für Flaschen mit Kronkorken mit Zahlen von 1 bis 24. Damit läßt sich prima ein Adventskalender erstellen. Die Zahlen sind in der Konstruktion 0.1mm erhöht sodass sie sich im Slicer gut einfärben lassen. Diese Erhöhung ist nach…
Bei uns passen 6 der Halter perfekt in eine Reihe und verkeilen sich in der Schublade perfekt ohne zu rutschen. Einzelne Halter in der Schublade rutschen natürlich. Anmerkung: Anscheinend gibt es bei Ikea verschiedene Chargen an Korken.…
Einfacher, 3D-gedruckter Weinkorken zum kurzfristigen Wiederverschließen von Weinflaschen. Der Korken ist aus flexiblem TPU gedruckt und bietet einen dichten Verschluss. ⚠ Hinweis: TPU ist nicht lebensmittelecht . Der Korken sollte den…
This adapter allows you to stack two IKEA Korken jars (0.5l) or IKEA Korken jars (1l) . Other sizes have different rounding and will not fit! I waned to stack two of those in a drawer but they always fell over. This stacking adapter fixes…
i made this to keep cloth nice and snug over my jar for kombucha making. I designed this for IKEA korken 2L tall jar. No idea if it will fit other jars but i think it is kinda standard size. Ive printed it in PLA but it may be better to…
Cabinet door holder for Ikea Korken (little 13cl ones) spice jar. Screw them in place with self-tapping screws or use some superglue.
Jar lid Korken Ikea. It is a little difficult to tear off the support.
Designed this adapter to fit Ikea Korken jars to e27 fittings. Print with 1,0 - 1,2 mm outer layers, top/bottom ca. 1,0 mm and infill around 15 - 20% should work fine. Please be aware to only choose low power light bulbs to minimize heat,…
Ich habe ein Gewürzstreuer für Korkengläser und To58 Deep entwickelt. Aus TPU drucken.
Halter für Kronkorken, Schlüssel oder andere Dinge, welche magnetisch sind. Schöne Deko für den Kühlschrank. Als Magnete habe ich Magnetkugeln mit 10mm Durchmesser genommen, welche im Netz für kleines Geld zu bekommen sind. Diese sind…
A cap which fits for the big IKEA KORKEN
This gets put in the lower hole of the steertube, use one o-ring in the groove to be sure it doesn't go out
I had to print with supports.
Die gedruckten Teile müssen anhand der Bilder zusammengeklebt werden. Es kann jeweils ein 45 Grad schräger und eine senkrechter Schnitt gemacht werden mit einen handelsüblichen Teppichmesser mit 0,5mm Klingendicke.
Dieser Halter ist für Kronkorken gedacht (Biedeckel) wir benutzen ihn für Gummideckel die zum Schutz der Flaschen sind vor Wespen Bienen oder anderen Tieren.
J'ai conçu ces bagues suite à l'achat de 3 bouteilles Bouteille Korken de 15 cl chez Ikea. J'ai d'abord créé le modèle simple pour distinguer les bouteilles (chacun sa couleur ^^, puis j'ai ajouté les trous sur le côté pour faciliter le…
Klucz na 3 zęby do wkrętów na gwint M6 do korków Adidas COPA Sense.1
Don't pull on the cork, twist it.
Thanks to download & ❤. These basketweave containers protect the Ikea Korken 1L bottles (and their contents). I uploaded two versions: the tight version is the one I printed. But it's Really Tight (warm soapy water might help). The other…
I wanted to have a clean solution to hold a hygrometer and a boveda pack for my IKEA Korken jars. This solution fits completely into the lid and doesn't stick out. It requires around 3-4g filament to print both parts. I use the 1L Korken…
Design for holding small ikea korken jars sideways for e.g. a spicerack.
I wanted to create a convenient desiccant holder for my KORKEN jars. Usually there's some residual moisture in the sugar, salt, or other things that I store in these jars. This desiccant holder helps in eliminating it. I put some silica…
I printed with 3 walls and 25% infill. Seems to be strong enough for 3 1 litre glass bottles.
Apparently, they don't sell these separately, at least not in Switzerland. The original becomes brittle and breaks after a few years, so I made this one. Let's see how it goes. Outer diameter 102mm Inner diameter 75mm Print using TPU,…
Jen lehce zvětšeno pro sklenice na cukr, sůl, mouku... Pasuje na: https://www.ikea.com/cz/cs/catalog/products/50213546/ - KORKEN 1l https://www.ikea.com/cz/cs/catalog/products/70213550/ - KORKEN 1.8l (akorát na 1kg mouky)…
Dieses Modell ist ein Fermentieraufsatz, der genau auf das IKEA-Bügelglas „KORKEN“ passt. Dazu wird der Glasdeckel des KORKEN-Glases ausgehängt , und der blaue Aufsatz wird an seiner Stelle in den Bügel eingespannt , wie auf den Bildern…
Thanks to download & ❤. These basketweave containers protect the Ikea Korken 1L bottles (and their contents). I uploaded two versions: the tight version is the one I printed. But it's Really Tight (warm soapy water might help). The other…
I made this lid insert to keep a silica gel moisture absorber inside the Korken jar from Ikea. If you store anything in this jar and you want to keep it dry, then try this!
Since planning to get back into some airbrushing again, had the thought that it would be great to also get a spray pot for cleaning out between different colors of paint used. Since those typically cost about $20 - the idea of customizing…
Replacement screw cap for tubed foods like Kaviar, Mjukost and so on.. Just print it with the treads up and it'll work. Some detal in the top (pointy bit) will probably not look as nice due to supports. Print Settings Printer Brand: Prusa…
Needed some labels for my ikea korken jars. The stickers were not that nice so i designed something else. They fold in because off their thickness and stay nice in place and above you goods.
A beautiful minimalist painting of a Titmouse on the wall or with a stand on the table. Size 200 x 162 mm You can find the small print stand for the table on my profile ↓ https://www.printables.com/model/759271-small-wall-decoration-stand…
I wanted to have a clean solution to hold a hygrometer and a boveda pack for my IKEA Korken jars. This solution fits completely into the lid and doesn't stick out. It requires around 3-4g filament to print both parts. I use the 1L Korken…
Holder for Hygrometer from AliExpress and Ikea Korken Jar. Search for 'Hygrometer' on AliExpress. No glue needed. Put the Hygrometer into the Top-Ring and turn it. Push the four plugs into the other ring. Now put the ring onto the…
Simple and easy holder to clip a Xiaomi LYWSD03MMC into the lid of an IKEA KORKEN glas. It sits in the space in the lid and can freely rotate. I tested it with a 0,5L KORKEN glas. But it should also fit the 1L, 1,8L and 2L KORKEN version.…
