161 models
This is a Skadis Holder for the Wera Kraftform Micro Screwdriver with 6 Slots. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg (you need to print 2 Hooks). As shown in the Pictures the Holders can be…
Simple Toolholder with collet system in “Kraftform” Design a) If you want to print with 2 color, use the file “Kraftform_2K” b) If you want to print with 1 color, use the file “Kraftform_1K” c) If you want to print with Fuzzy Skin, use…
Wera Kraftform mit Shimano HollowTech Tool (TL-FC16) Entdecken Sie die innovative Lösung für das (De-)Montieren der Kunststoffmutter an HollowTech-Kurbeln - die perfekte Kombination aus dem Shimano TL-FC16 Tool und dem Wera Kraftform…
Hello together, here you can see my idea of a holder for the Wera Kraftform Micro screwdrivers ;-) The lower hexagon is there to keep the screwdrivers aligned and the upper circular shaped arms hold them in place. Would be nice if you…
Minimal space consuming stand for set of Wera Kraftform Micro screwdrivers.Almost any screwdriver from Kraftform Micro series should fit. Model is ready for print, no need for rotating. No supports. I printed it with 0,2mm layer height.…
I made this holder for the Wera Kraftform Micro screwdrivers. I put a lot of emphases on compactness, each holding 7 screw drivers. There are many similar holders, but I wanted it to be half pitch and high density. I tried making it 3…
Screwdriver Holder for Wera Kraftform Micro series Big Pack Print Settings Printer: Cetus mk2 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20 Filament: Das Filament PLA Black Category: Tool Holders & Boxes
Only a small remix with space for 8 screwdrivers
This is another remix of the Wera Kraftform Micro Screwdrivers. The photos show an older design, which was not stackable, which was really dumb. The uploaded model is a updated version and is stackable .
Holder for Wera Kraftform Plus – Series 900 Big Pack for the Multiboard The holder for Wera Kraftform screwdrivers (900 series) is designed for use with the Multiconnect System by @DavidD for Multiboard. Both holders are intended for the…
Multiboard mount for Wera Kraftform Micro screw/hex/torx drivers
I have made this using the idea from Bob, but redrawn in FreeCAD. I've also decided not to have the model “spring” to grip the screwdriver shaft (The wedging action was damaging the screwdriver handle). So now the screwdrivers just sit…
Maybe my mounts are a little bit “overdoing” :-) , but the Wera Kraftform Screwdrivers are really good and expensive. That's why I wanted to give them a special mounting. If you want to print the labels in 2 colors, you've to set a…
This is a Skadis Holder for the Wera 817 Kraftform Kompakt Screwdriver/Bitholder. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg . The Design is inspired by the ikea skadis wera mini grips holder from…
Wera Kraftform Micro holder Adaptable desktop holder for Wera Kraftfrom Micro. The Example shown in the pictures fits the Big Pack set with 25pcs and still has some extra space for additional ones. The parts of the holder can be screwed…
5 x 5 x 4 Gridfinity Wera Micro Kraftworm Holder
As everyone knows, Wera Kraftform Screwdrivers are of their own kind. Good grip, precise manufacturing, a joy to use. As I own the Big Pack 300 and use them a lot, I was looking for holders to mount them to my Skadis Pegboard. One day I…
This is a Skadis Holder for the Wera Kraftform Screwdriver (with 6 Slots). Material: PLA Infill: 20%
Scadis pegboard holder for 8 screwdrivers from Wera Kraftform.
I can across the design of TJDesign and I liked it. Printed in two parts without supports, multiple sizes, holds secure and you don't have to lift it all the way up because of the cutout. But during the printing a came across the problem…
This is a remix of @Skrivkunnig_276816 's holder for Wera Kraftform Micro screwdrivers. It has room for 5 screwdrivers in a 2x5x4 Gridfinity bin. I wanted a smaller version with room for 5 screwdrivers, just the ones I need for printer…
I included model files as pre cut to 2 parts for smaller printers and as a single models for printers capable printing 4x6 sized gridfinity bins.
Remixed for 10 capacity and length reduced by 3 mm so it would fit on my circular bed. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Tool Holders & Boxes
Remixed from Ricard2K's stand - the top part (screwdriverstand.stl) is unchanged, as it fits the screwdrivers perfectly. I have redesigned the base (Wera Stand 2.stl) as whilst the original is functional and clearly works, I kept having…
A remix of Peaches491's Wera Kraftform Kompact pegboard mount, for the IKEA SKADIS pegboard/mounting system. Integrating the most secure/best hook/mount I've yet to find from crijnsjan's digital calliper holder. Print upside down with…
A remix of the model from users dodasch and Staubi that couples directly with a quick release chuck 3MF saved with OrcaSlicer 1.7.0 Printed with Sunlu PETG black and mint green
French cleat holder for the Wera Kraftform XXL set.
I wanted a clean and small sized wallmount for my Wera Kraftform Turbo Set. Therefore I designed a Bitholder and added a Remix of https://www.thingiverse.com/thing:3090993 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts:…
A easy to print holder for Wera Kraftform Kompakt screwdriver to attach onto the honeycomb storage wall. Version 1 requires a M3 screw and nut also you need to print the insert-with-M3 from the Honeycomb Storage Wall . Version 2 includes…
The existing model for the Honeycomb Storage Wall (HSW) by BjoernF only featured 5 slots, leaving me screwed, as I have a set of 6 Wera Kraftform Micro's. So i've remixed the original from Bob, using the concept from BjoernF. Open source…
Two adaptor brackets which, when combined, allow for the installation of Wera Kraftform Screwdriver, Hex & Torx Driver etc. racks with 1"/25mm pegboard. The adaptors are based on an stl file I found online designed for IKEA Skadis rack…
Hack up your allen keys , heat key up and insert into handle.
I recommend printing a single driver holder to check fitment. Adjust the model a percent or two as necessary. This holder requires printing a left and right flat ‘sidepiece’ for each holder panel from the DDD Wall Control project.…
I designed a better holder for my set of 6 WERA Kraftform Plus Torx T40/30/25/20/15/10 screwdrivers than the one that was supplied. Advantage: Minimal space requirement in height (~1cm) for hanging and therefore also suitable for small…
This is a Lid Mount for Sortimo L-Boxx to store 15 Wera Kraftform Kompakt Bits.
I couldn't find a Gridfinity storage for the Wera Kraftform Plus 334/6 you can buy. Other models didn't have all the correct sizes, so I made this. I had to print this in two pieces to fit onto my Prusa Mk3, so I have uploaded the…
a remix of https://www.thingiverse.com/thing:2918462 This are all the screwdrivers and holders I have. The files can be printed without support but i recommend a brim. When finished shave down the walls on the bottom and sand it clean.…
Skadis holder for Wera Kraftform Screwdrivers Remake with slightly less tight fit. Original designer is koldo19
Box for Kraftform Kompakt VDE 17 Universal 1, 17 pieces set . Requires 8 strong 3x2mm magnets to hold cover.
A printable key that fits over the hex part of your Wera micro screwdriver for more leverage and control I made it to be a perfect friction fit on my printer, just scale it accordingly if you need a better fit on yours :)
Printed on Bambulab X1C mit AMS PLA Black & Whtie Muss mit Supports gedruckt werden 0,2mm Layer 0,4mm Nozzle Einmal die Datei mit Schraubendreherbezeichnungen und einmal Blanco
Wera micro organizer Use a drill if you want to open up the holes a wider for larger diameter tools please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…
Einsatzschale für die Wera Kraftform Kompakt VDE Einsätze wie es sie oft im Set zu kaufen gibt. Durch die Griffmulde können die einzelnen Einsätze leicht entnommen werden. Die Einsatzschale ist auf Grund des Druckbereichs des Prusa Mini…
I printed with one plate on a1 mini by just cutting in half then printing. Worked well. 3mf print profile and photo included.
First, thanks to https://www.printables.com/@AD3D_537282 for not just providing the design, but also including the F3D file. This allowed me to learn how they made it in the first place (they are rather talented check out their other…
I got myself a Wera Kraftform XXL screwdriver set and found it wasteful to throw away the existing rack for a printed one. This print will allow you to take the rack you already own and hang it over the top of an Ikea Skadis pegboard.…
Holder for Wera Kraftform Micro drivers. Print instructions I did not make these. Original sources: https://www.thingiverse.com/thing:1507753 https://www.thingiverse.com/thing:3091820
This is designed for the Wera Kraftform Kompakt 27 RA 1 SB Ratcheting Screwdriver & Bits and will mount it onto the Skadis Holder. Link the driver this is designed for -…
Wera Kraftform Micro driver holder that hangs at the back of the pegboard, this saves precious pegboard space.
Es handelt sich hier um eine Gridfinity 4 x 4 worauf ich eine Aufnahme für Wera Kraftform Einsätze konstruiert habe. Insgesamt 11 Einsätze finden dort ihren Platz. Beachtet bitte das nicht alle Einsätze in jedes Fach passen da diese…
Screwdriver holder for smaller electronic screwdrivers (designed it for the Wera Kraftform Micro Series) it's not "clip in" like the original one I got the design idea from (Universal screwdriver holder! by RoBotniK) works like a charm, I…
There are four types of inserts: Type A is 13 mm and may be used on a second and third level with no modifications and on a lower level with gasket. If you want to use Type A in a first, lower level, you need to add A+ gasket under it.…
Gridfinity (4x3x6) compatible insert for an Wera Kraftform screwdriver kit. This is for a Canadian specific kit with 3.5mm flat, Robertson #1 (sq6), Robertson #2 (sq8), Phillips #1 and Phillips #2. “Bits” can be tilted up for easy removal.
Wera style Kraftform Handle with Changeable Hex Bit Color coding hex bits You can create a color change at 13mm to 15mm on the Hex bits to color code them Supported bits Normal Hex bits Long 25mm Hex Bit adapter Allen key 2.5mm - if you…
Wera 7515 Kraftform Safe-Torque Speed holder gridfinity tray.
I needed a larger compartment to contain my Wera Kraftform Micro, so I made a remix, so I could adapt it to my Fasano tool trolley. It can contain up to 22 Wera Kraftform Micro. It is printed in two parts, and then unite with each other.
Split and mirrored the original 12 piece tray to only hold 5 pieces for the Wera Ball End Hex driver set. Remixed from Luis' excellent model - https://www.thingiverse.com/thing:4637532 (Thanks for including the STEP file!).
Fits 6 screwdrivers and is somewhat stackable. The measurements are a bit special, since it's what I needed to fit my drawers: 189x89x22mm.
Hey all. Uploading my second design here for a wonderful Wera Kraftform Micro Precision screwdriver set I received as a gift. I really like this set of drivers, perfect for all my electronics hobbies, However, i was less than thrilled…
Holds 24 drivers in 4 tiers of 6 drivers. Perfect for organising Wera Kraftform drivers and keeping them easily visible and accessible. Designed for mounting to 2020 extrusion. Print with the angled “back” on the bed for best results.
This uses the DDD Printable Wall Control System ( github ) to mount the screwdrivers. 932/6 Screwdriver set Kraftform Wera 334/6 Screwdriver set Kraftform Wera Use a good percentage infill to keep this rigid, at least 40%. For the…
A 1x4x6 gridfinity for a wera 1013 bit holder and 14 bits. Bits can be a little tricky to remove as there is not all that muck space in the 1x4 bins. I printed my model mirrored.
This is a Skadis Holder for the Wera 8004 Zyklop Switch Ratchet and the Wera 813 Kraftform Kompakt Screwdriver/Bitholder. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg . The Design is inspired by the…
Hier meine Halter Version für die Wera Kraftform Serie 300 Schraubendreher. Jeder Halter ist angepasst und beschriftet. Here is my holder version for the Wera Kraftform Series 300 screwdriver. Each holder is customized and labeled.…
a single Kraftform Micro holder for skadis
Holder for a WERA 2035/6 Kraftform precision screwdriver set that makes the inserting and removal of each screwdriver quick and simple. Each screwdriver pocket is designed to match the WERA hex handle design and allows the screwdriver to…
This Gridfinity bin is for the Wera Kraftform Micro 2052/6 hex screwdriver set. The driver sizes are debossed into the bin bottom. You can print it in a single color or, with a multi-color printer, print the labels in a contrasting color.…
Compact Solution for Wera Kraftform Kompakt Organizing
Fits six Wera Kraftform Micro screw drivers. Prints without supports. Uses full-size T-Clips . Maintains its orientation on the Skadis board via a protrusion on the back that slots into one of the Skadis holes. Designed in OnShape .
Was lookng around various model sites to find a holder for the Wera Kraftform XXL3 kit of drivers, without any luck, so I created my own. The idea was to keep the holder as compact as possible and flush to the Multiboard. The mount is…
This model is not perfect and only has 22 slots, so feel free to optimize it as you see fit.
I was looking for a good wallmount for the Wera Kraftform Comfort VDE Screwdriver Set but i only found the original one from alrab over at Thingiverse. Since i wanted it to mount on the wall instead i decided to make a quick remix of his…
Here my Version 3.0 from my Wera screwdriver Holder ( Thing 3434400 ) with remove from the front of the holder. The AS Holder are from the 932A Series in Version Slotted The Holder "Phase" is a main tester from the VDE Series, also the…
Gridfinity holder for Wera Kraftform Micro Electronics Precision Screwdrivers. The holder is sized so that even the longest screwdrivers in the Wera 05073675001 Kraftform Micro-Set/12 Sb 1 Screwdriver Set will fit. Not sure about drivers…
A 2x version of the wera KK micro 6x holder, i had 2 new screwdrrivers and wanted them the same spacing and distance like the others, so i made a 2x holder that fits right beside the 6x or 8x versions uses all the original hardware like…
A remix of "Skadis Holder for Wera Kraftform Micro Screwdriver" that holds only 2 screwdrivers.
I couldn't find a nice mount for the Wera Kraftform Kompakt 27 RA, so I decided to make my own! It's inspired by TJDesign's Wera mounts but built completely from the ground up! The mount uses CSD_Salzburg' Skadis Universal Hook , which…
Remix with new holder for the handle, new dimension for the new version of kraftform kompakt and gridfinity base
Here is the inlet for the holder “Wera Kraftform Kompakt VDE", which I also constructed. This inlet is freely customizable only the individual parts must be combined. The files are available as STEP and as 3mf. This insert has no symbols…
Redesigned another Wiha holder to get what I wanted. The holder holds 7 screwdrivers from Wera Micro Sets (normally there a 6 but i use the for visual reference) The toolholder is to be screwed on wood. Takes ~2.5h to print.
Parametric storage rack to mount any number of Wera Kraftform Micro screwdrivers to a Wall Control panel. The Fusion360 backup file is included, I also included an instruction image to help with changing parameters. The model parameters…
Wera Kraftform Kompakt VDE screwdriver holder for @RostaP honeycomb wall. Designed for the 17 piece set 16 bit holder with 2 main bodies. Printed on Ankermake M5 with 0.2mm layer height and 15% infill in PETG.
Imporved Version with angled surfaces to grip the bits easier and hold them better in place. Decided to go with a very tight fit to keep things inside 5x3 Gridfinity Footprint
A simple skadis holder for the Wera screwdriver set “Kraftform Kompakt” 10 or 12. Print both parts, no supports required.
Print the legs lying down. No supports necessary If you want to use an MMU and print the colored hexagons accents. Assemble with glue if you like.
This is designed for the Series 7400 Kraftform adjustable torque screwdrivers and will mount it onto the Skadis Holder.
The original Version was Fantastic for the Hex Drivers we all use for our 3D printers, but for those of you with the standard Philips, Posi or Flathead Kraftform Micro drivers, it was too short. This version has had 20mm added to the…
I have just moved over to use the excellent Milwaukee Packout Storage system for my hobby/3D printing room. I am using gridfinity within them for both tools and parts storage. I went mad and bought this torque screwdriver - primarily for…
I printed this upside-down with a bit of support on the handle loop but it should be possible to print upright too.
This uses the DDD Printable Wall Control System ( github ) to mount Kraftform Micro screwdrivers onto a wall control surface. I didn't use support for printing and used PLA with 20% gyroid infill. For the sidepieces I used the 2x0 Flat (…
Holder for the Wera Kraftform Kompakt 62 bit set with 89mm long bits. This is compatible with the 'Skadis_Universal_Hook' from CSD_Salzburg for mounting on the Skadis pegboard from Ikea. Alternatively, the holder can be mounted on a…
Inspired by a similar driver holder posted on Printables by ballimbauch , but redesigned from scratch for the T-Nut system.
Tool holder for Wera Kraftform Kompakt VDE 817 with 14 bits (05003474001 / 05006607001) This seems to be the product on Wera website (mine was from amazon [05003474001] without the nice colors 😥)…
Upright screwdriver holder rack for wera kraftform micro screwdrivers. Fits ideally onto an IKEA BROR trolley. Can attach to M5 pan heads screws if fitting to a wall. Print upright without supports.
Screwdriver holder for 13 screwdrivers. Wera Kraftform Plus Lasertip 335/350/355/6 6-Piece Screwdriver Set Wera Kraftform Plus Lasertip 334 6-Piece Screwdriver set.
I changed some angles to reduce material consumption and allow printing without supports. Also, I enlarged the holes to allow the use of the stand with some sizes of the Wera-screwdriver that have a larger shaft. The model should be…
I saw the pile of Wera drivers on my desk and thought… hmm.. I can solve that. The drivers snap fit in with a satisfying thump, and hold in place very securely, and easily snap back out.
No supports needed
This model is a holder designed for a Wera Kraftform Kompakt 838 RA-R M, intended for use with the honeycomb storage wall organization system. I remixed an existing model to fit my own needs. I hope this helps someone else as well. Thanks…
