Counting matching models…
This took a while and a lot of filament to get right, and I’m posting it for free. If it has benefitted you (OEM wing mount is $17!), please consider posting a make or buying me a beer to say “thanks guy!”. Anything is much appreciated.…
Arrma Kraton 6s Rear Mudflaps These mudflaps fit beautifully on the rear control arms of the Kraton 6s with the existing screw holes (you need to put a little longer screw into the hole which connects the stabilizer rods ) I printed them…
ARRMA Kraton 6S Rear Mud Flaps, 3D print PETG Prusament or Carbon fiber 1,5mm created by dzino
I designed these improved mudguards for the Arrma Kraton 6S (V6) EXB. They also fit other models, such as the Outcast 6S EXB — I use the same set on both. The original design I tried was too fragile for my needs, so I modified and…
TPU rear wing protector for the Arrma Mini Kraton, to give the wing a little extra protection from getting knackered when landing upside down. The geometry is pretty much spot on, as you can see in the last pic where I printed test pieces…
I recreated these mudguards based off a set I purchased, with some small tweaks and added Arrma branding. The Arrma ‘RR’ model was borrowed from https://www.printables.com/model/114281-arrma-logo-multicolor You will require 6 screws to…
Universal wall mount for RC cars, trucks and crawlers from Arrma, Abisma, Losi, Tamyia, Traxxas and others with a tire size up to 170 mm / 6.7 inches. I made the bracket for Arrma 6S Trucks e.g. Kraton 6S, Outcast 6S, Notorious 6S, ...…
Can be printed in different materials, depending on what you want to achieve. I have printed them in Polymaker PolyFlex TPU95 and Prusament PC Blend. Currently testing to see what works best. Custom supports are drawn directly onto the…
I had a TPU wing on my Kraton 4S but the screws ended up pulling through the mounting holes. This piece connects the two screws to prevent against this happening again, while allowing me to still use the wing with the widened mount…
Two versions of rear arms.. -I recommend atleast 3 or 4mm walls/bottom/tops with vertical printing.. For best durability make 100%infill.. This is rear right arm. For left arm - mirror this part. It is a perfect fit. -it doesnt have holes…
I had printed some other center skid plates for my Typhon 6s but none of them were as durable as I would have liked, especially as I wanted an ultra strong one for my Fireteam as well. Thus, I made this one which uses 4 M4x12 BCS screws…
To assemble this wheelie bar design, you will need the following hardware: 1x M5 × 80mm Screw 1x M5 Nyloc Nut (Nylon-insert locking nut) 2x 15mm Washers 2x M3 × 10mm Screws 2x M3 × 16mm Screws
German Mein Design sorgt dafür, dass der Kolben des Dämpfers geschützt wird. Es funktioniert beim Arrma Mini Kraton 3S. Ich habe es in TPU mit 100% Infill gedruckt, damit es eine gewisse Flexibilität und Stabilität hat und nicht so…
Universal wall mount for RC cars, trucks and crawlers from Arrma, Abisma, Losi, Tamyia, Traxxas and others with a tire size up to 91 mm / 3.6 inches. I made the bracket for Arrma Mini Kraton. For mounting use 2x 4,5mm Spax screws or…
TPU rear wing protector for the Arrma Kraton 6S, to give the wing a little extra protection from getting knackered when landing upside down. The geometry is pretty much spot on, as you can see in the last pic where I printed test pieces…
I needed extended body posts so I could get a nitro truggy body to fit on my (electric) Kraton 4S V2. The new body I purchased had some interesting cut lines that made it difficult to get the body clips to go through in the rear (due to…
I made this to substitue my broken AR330338 piece. It's for a TYPHON 6S, although I see the same part number for the KRATON, OUTCAST, TALION and NOTORIOUS so I guess other cars sharing the same piece should have no issues. This is a VERY…
German Mein Design ersetzt die orginal Dachskids und sind etwas höher als die Originalen. Somit sollte der Arrma Mini Kraton besser geschützt sein. Es funktioniert beim Arrma Mini Kraton 3S. Die original Schrauben können wiederverwendet…
German Mein Design dient als Ersatz für den original Flügelbefestigung (ARA-2666). Es funktioniert beim Arrma Mini Kraton 3S. Der vorhandene Spoiler wird noch benötigt. Ich habe den Flügelhalter in TPU mit 20% Infill gedruckt. Ich denke,…
I needed a longer shock spacer for my Mojave 4s and so I made some in Tinkercad and made a bunch of different sizes. Spacers have the exact same width and inner diameter as stock, but with assorted heights to tune your suspension. There…
My Kraton came with the HR wing hardware, that hardware doesnt work with the TPU wing mount at the following link, https://www.thingiverse.com/thing:4781582 , that thing has been working great. But yea, the HR wing mounts dont work on it…
This is a V2 of my protoype which needed more manual corrections. This one you can directly fit on car. I used and tested with PETG material and had very good results.. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Yes…
I was a little unhappy at the somewhat sloppy servo saver on my Arrma Fireteam, and the design of the bellcrank prevents you from simply tightening it. Thus, I made these spacers which fit between the factory metal washers and drastically…
This holder allows for secure mounting of Hobbywing Max G2 series power switches in the same position as the stock Spektrum power switch. The switch is supposed to tightly pop into place but you could also use a dab of glue if it isn't…
This is a battery strap adapter specifically designed for the Arrma Mini Kraton. You can re-use the original screw. The strap attachment point is slightly offset to the side so that it forms a diagonal line and holds the battery more…
German Mein Design dient als Schutz für den Lüfter des Motors und soll dafür sorgen, dass keine Steine oder andere Sachen hineingeraten. Es funktioniert beim Arrma Mini Kraton 3S und allen anderen Lüftern mit 30x30mm Abmessung. Ich habe…
I crashed my kraton into a tree and blew the front part of both battery trays.. I printed it with PETG 100%infill - perfect fit - works great for both sides, mirror part in slicer Print Settings Printer Brand: Creality Printer: Ender 5…
I have a Basherbody on my Outcast 4s V2 and only needed one hole, so i allowed myself to do a little remix. printed in filamentum 98A TPU Thanks to @Geddysburg_565729
Hi, for a while I had wanted to use a different, larger body on my Arrma Kraton 6S, but could not find anyone online who had tried it, so I decided to give it a go myself. After some reasearch I had found that the Traxxas Slash has…
I wasn't happy with the play in the suspension when using the aluminium shock collar spacers, so I decided to make my own. These custom versions fit much better and eliminate the unwanted movement
German Mein Design sorgt dafür, dass die Reifen des Arrma Mini Kraton aufgehübscht werden. Es funktioniert beim Arrma Mini Kraton 3S mit den originalen Reifen (ARA-2658). Ich habe sie in TPU mit 100% Infill gedruckt. Support ist nicht…
Kraton 4s 2.5 center shaft will need longer bulkhead and chassis screws
Custom roof skid plate for Arrma Kraton 8s or Outcast 8s. Replaces perfectly the original as an improvement on the visuals. Great for an unique design on your RC.
This is a simple mount that attaches to the top of the Arrma 4s RX box. It holds a Hobbywing ESC power button and the AGFRC V3 aluminum gyro. There is also a version that just holds the Hobbywing button. Normally it's a press fit, but you…
Broken the center driveshaft on your ARRMA Kraton/Outcast V2(.5)? Well, here’s a fun way to repurpose the spare spring from it! All you’ll need is: A broken driveshaft e.g. ARA311065 (any of the 4s line will work, but I'm not too sure…
ARRMA 6S NOTORIOUS / KRATON / BIGROCK X ZDRACING TRUGGY 1:7 4WS 4WD RC CAR RC CAR PRINTED ARRMA X ZDRACING TRUGGY 1:7 4WS 4WD (4 WHEEL STEERING X CENTRAL DIFF) Ultra-high-performance 1/7 scale RC car, 3D printable, using standard ARRMA…
35mm fan mount for the Arrma Kraton 4s. Attaches to the chassis brace then screws into an unused hole in the chassis. You can download the fan guards from https://www.printables.com/model/337497-arrma-35mm-fan-adapter-plate-and-cover
Universal wall mount for RC cars, trucks and crawlers from Arrma, Abisma, Losi, Tamyia, Traxxas and others with a tire size up to 170 mm / 6.7 inches. I made the bracket for Arrma 6S Trucks e.g. Kraton 6S, Outcast 6S, Notorious 6S, ...…
To assemble this wheelie bar design, you will need the following hardware: 1x M5 × 80mm Screw 1x M5 Nyloc Nut (Nylon-insert locking nut) 2x 15mm Washers 2x M3 × 10mm Screws 2x M3 × 16mm Screws
You may need an additional 1x M3 × 20mm screw a M3 Nyloc Nut, and a hook-and-loop (Velcro) strap. Recommended Material: suggest printing this in PETG or ASA . These materials have higher heat resistance than PLA and won't warp during long…
German Mein Design dient als Ersatz für den original Bumper der Karo. Es funktioniert beim Arrma Mini Kraton 3S. Ich habe den Bumper der Karo in TPU mit 100% Infill gedruckt. Ich denke, dass es Sinn macht den Bumper der Karo in flexibelen…
Wanted a way to tie down some stuff on the bed of the mini kraton for fun... Must be printed with TPU because they're meant to be bent to attach to the screw posts under the bed, and only TPU can withstand any force being this thin. I…
Arrma Mini Kraton Lower Control Arm – TEMPORARY / STUNT USE (V5) This is a temporary replacement lower control arm for the Arrma Mini Kraton. Bolts up using all original hardware and maintains correct suspension geometry. This is NOT an…
Spring preload spacers for the Arrma Kraton 4S are available in sizes ranging from 2mm to 12mm. PETG is recommended as the printing material.
ARRMA 6S NOTORIOUS / KRATON / BIGROCK X ZDRACING TRUGGY 1:7 4WS 4WD RC CAR RC CAR PRINTED ARRMA X ZDRACING TRUGGY 1:7 4WS 4WD (4 WHEEL STEERING X CENTRAL DIFF) Ultra-high-performance 1/7 scale RC car, 3D printable, using standard ARRMA…
Standard height and Tall roof skid guards for the stock Kraton 8s body. I recommend a hard durable plastic. You do not need supports, it prints perfect with out them. Print Settings Supports: No Notes: you don't need supports Category:…
This keeps your engine 30 to 40 degrees Celsius cooler. Motor size +/- 2mm. Requires two 40x20mm 12V fans . Four M3x25mm screws are needed to close the lid. Can be operated directly at the receiver via the BEC voltage. The case has space…
35mm fan mount for the Arrma Kraton 4s. Attaches to the chassis brace then screws into an unused hole in the chassis. You can download the fan guards from https://www.printables.com/model/337497-arrma-35mm-fan-adapter-plate-and-cover
Really liked Ludolg's shock stand, the 1/8th base works great for Kraton 6S shocks, but I also needed something for my Grom's and the Mini Kraton, the 1/10th base was too large, so I quickly made a new one that would fit my needs. Just…
German Mein Design dient als Ersatz für die originalen Mudguards (ARA-3293). Es funktioniert beim Arrma Mini Kraton 3S. Ich habe die Mudguards in TPU mit 100% Infill gedruckt. Ich denke, dass es nur Sinn macht die Mudguards in flexibelen…
You may need an additional 1x M3 × 20mm screw a M3 Nyloc Nut, and a hook-and-loop (Velcro) strap. Recommended Material: suggest printing this in PETG or ASA . These materials have higher heat resistance than PLA and won't warp during long…
German Mein Design dient dazu den Luftfluss zum Lüfter trichterförmig zulaufen zu lassen. Es funktioniert beim Arrma Mini Kraton 3S und allen anderen Lüftern mit 30x30mm Abmessung. Ich habe das Lüftertrichter in TPU mit 100% Infill…
German Mein Design sorgt dafür, dass die Reifen des Arrma Mini Kraton aufgehübscht werden. Es funktioniert beim Arrma Mini Kraton 3S mit den originalen Reifen (ARA-2658). Ich habe zwei Versionen der Felgenringe erstellt. Die erste Version…
German Mein Design sorgt dafür, dass der Bumper sich mehr bewegen kann. Somit sollte der Arrma Mini Kraton besser geschützt sein. Es funktioniert beim Arrma Mini Kraton 3S und ersetzt das original Teil (ARA-2667). Die original Schrauben…
I need hangers for this beast of a RC car that would hold the full weight without breaking. I probably over engineered these for strength but I have peace of mind that they will hold up. These hangers are super strong. I incorporated a…
German Mein Design dient dazu den Luftfluss zum Lüfter trichterförmig zulaufen zu lassen. Es funktioniert beim Arrma Mini Kraton 3S und allen anderen Lüftern mit 25x25mm Abmessung. Ich habe das Lüftertrichter in TPU mit 100% Infill…
German Mein Design ist eine Wheeliebar die für mein Design einer flexiblen Spoilerhalterung kompatiebel ist. Den flexibelen Spoilerhalter findet ihr hier: https://www.printables.com/model/1651930-arrma-mini-kraton-3s-flexible-wing-mount…
German Mein Design ist eine Wheeliebar für die original Spoilerhalterung. Es funktioniert beim Arrma Mini Kraton 3S. Die Wheeliebar und die Wheeliebarräder habe ich in TPU mit 100% Infill gedruckt. Die Gleitlager habe ich in OVERTURE Easy…
German Mein Design dient als Ersatz für den original Bumper der Karo. Es funktioniert beim Arrma Mini Kraton 3S. Ich habe den Bumper der Karo in TPU mit 100% Infill gedruckt. Ich denke, dass es Sinn macht den Bumper der Karo in flexibelen…
Deigned these wheel pads to be used with the wall hangers for my Arrma Kraton 8s. I wanted the car to be more parallel to the wall. They can be mounted with screws. Since they are not really supporting much weight the print settings are…
Wanted a way to tie down some stuff on the bed of the mini kraton for fun... Must be printed with TPU because they're meant to be bent to attach to the screw posts under the bed, and only TPU can withstand any force being this thin. I…
Arrma Mini Kraton Lower Control Arm – TEMPORARY / STUNT USE (V5) This is a temporary replacement lower control arm for the Arrma Mini Kraton. Bolts up using all original hardware and maintains correct suspension geometry. This is NOT an…
Thin version is modeled after the OEM part. Thick version reduces the suspension travel by 3mm and is intended to be used in combination with M2C shock shafts. Rubber washers con be omitted when using this spring perch.
Brace end with m6 thread.. Experiment with materials and print orientation for best strenght.. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 200 Infill: 100 How I Designed This…
This is a rough model of front arm for kraton 8s. I haven't tested it! For rear arms I had best results while printing it at 45deg angle with ABS plus and high temps.. Arm held for normal bashing and some big jumps - but failed at landing…
After losing a body clip I decided to make a threaded mount that would eliminate the need for clips. I printed this in CF nylon and it had been indestructible so far. Print Settings Printer Brand: Anycubic Printer: Kossel Rafts: Yes…
!!!DO ONLY PRINT IN VERTICAL POSSITION!!! otherise they won't get perfect because they will sag. Also , choose the thinest layer hight and if possible print one at a time so you get the best quality. 100% infill is necessary These are…
This is a 1:1 replacement for the ar330656, Arrma Kraton 6s EXB heavy duty front suspentioonarm
Front Bumper Delete plate for Arrma Kraton 6s (2019 ver.) I used this plate to replace the Front bumper in a crash as well as adding a RPM front bumper\skid plate. it retains the lower hinge pins just like the factory bumper
