Counting matching models…
Just two simple kubotans, one with Planetler logo :) Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 100% Category: Sport & Outdoors
just a self defense weapon for personal use to defend from all attackers no matter sizes
This is a printable kubotan for selfdefense or training purposes. if you need a Holster to carry the Kubotan on your belt you can download it here: https://www.printables.com/model/251925-kubotan-holster Please check your local laws…
Effective self defense device! This Kubotan or Drill Stick can easily be put on your keychain and used for protection.
So i tried to print a Kubotan i found on Thingiverse, but the base of it sucked and didnt stick well enough to actually finish the print, so i designed my own (and made it a tiny bit less pointy while i was at it). Print Settings Printer…
I printed it in PETG with 70% infill and everything works fine. if you dont have a Kubotan yet or if yours dosnt fit, you can download one here: https://www.printables.com/model/251964-printable-kubotan …leave a Feedback EDIT: i had some…
UPDATE: Changed rounded edges to chamfers to improve print quality. Also I have added a 2"x2" version by request, but I have not personally tested the 2x2 fit. Hooks that attach to compact utility tractor Roll-Over Protection System…
A simple keychain for your Kubota tractor. Dimensions; 59x13 mm
I printed mine in pla+ to mount a large led light bar. has held up, had to replace one side due to a discussion with a large tree branch that it lost.
Another variation of a self defense stick or Kubotan. This one is ~140mm long and has an OD of 18mm. It has a rib on one side, which is mostly a concession to make the model printable in a horizontal orientation, but it's designed to be…
Transform any standard sharpie permanent marker into a discreet and effective self defense tool. This 3D-printable insert is designed to fit snugly inside the marker body once the ink cartridge and tip mechanism are removed. This insert…
Kubotan Holster This is a Holster so you can carry your Kubotan on a Belt. it uses two hair ties to hold everything in place. print it with the slot for the kubotan facing up. I made this design because i realised that my first design (…
Kubotan zur Selbstverteidigung waagerecht druckbar, skalierbar
Use manual trees infill , suggest using PETG or ASA . Use a few pieces of double sided tape inside the piece to prevent sliding , don't over tighten .
I have scaled down the model. The hole for the key ring is adapted and the tip rounded. Height: 60 mm Diameter: 7 mm Filament I have used wooden PLA and marbled PLA Quality wooden: 0.18mm layer height / 0.6mm nozzle marbled: 0.12mm layer…
Needed a mount for the Kubota tractor, which mounts the lights to the roll over hoop, without making any modification to the hoop itself. This uses M8x1.25 threads all mounting, and I use a piece of tire inner-tube to protect the roll…
Il portachiavi kubotan ha lo scopo di difesa personale in strada. Si infilano le dita medio e indice negli anelli, e il becco rivolto verso il palmo della mano: viste le dimenzioni è impossibile ferire l'addressore, ma fa quel danno…
I wanted a keychain for my tractor keys, so I designed this, blending The old and new Kubota logos. Printed using 0.12mm layer, 2 walls, 15% infill on Creality K2 Plus with CFS Either print the included .3mf, or import the .stl files as a…
Hi A simple ergonomic defense thing.... Happy Printing ! Category: Household
Kubotan zur Selbstverteidigung waagerecht druckbar, skalierbar
This fuse holder is designed around https://www.amazon.com/dp/B0BD15SKDP/ref=twister_B0BD155YWW?_encoding=UTF8&psc=1 BioFuse (3 PACK) Standard ATO 12-AWG In-Line Panel Mount Waterproof Fuse Holder for Automotive and Marine use. Blade…
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⣀⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⢉⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⢀⣀⣈⣁⣀⣀⣀⣀⣀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⣼⠋⢉⣉⠉⣉⣉⣉⣉⠀⠀⠀⠀⠀⠀⠀⠀⠀⣤⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⣿⠀⣾⣿⠀⣿⣿⣿⣿⡇⠀⠀⠀⠀⠀⠀⠀⠀⣿⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠛⠀⠛⠻⠀⣿⣿⣿⣿⣇⠀⠀⠀⠀⠀⠀⠀⠀⠛⠀⠀⠀⠀…
A modern Yawara aka Kubotan- a re imagination of a Japanese martial arts tool. Prints with no supports. Two versions are included. 170mm full version 160mm slim version
This tool is a perfectly snug fit to safely remove fuel filter on a Kubota Loboy Diesel Generator and B8200 Tractor without damaging it. 3D PRINTING SETTINGS 0.15 100% Infill PETG
Kubotan zur Selbstverteidigung waagerecht druckbar, skalierbar
printed in TPU,SCALE DOWN TO 97.5% FOR PROPER FIT!!
A large and small knob for Kubota tractors. Large is printed in PETG with a M10x1.25" bolt. Small is printed in PETG with a M5 heat set insert.
Adaptor to hold yeti 20 oz tumblers in oversized Kubota M7 series tractors. Helps keep yeti from sloshing and rattling.
Knoflík pro aretaci okna bagru. Použito např. v bagru Kubota KX 36-2. Určeno pro použití se šroubem velikosti 10. Vytvořeno v programu Fusion360. Excavator window locking knob. Used eg on the Kubota KX 36-2 excavator. Designed for use…
Print it in at least 30 degree angle and with 50-60 infill for it to not break in any emergency situation.
This is a tight fitting clip to mount your Pat's quick hitch spreader bar to your rops so it will always be at the ready when changing your 3 point attachments. You will need M6 35mm cap head screws and hex nuts. you may have to drill out…
Props open the blade guard on my TG-1860D so I can keep it upright while driving around if required. Most people just take these off, but I like it for mowing to prevent launched stones and sticks so I made this. Print with the flat bit…
This is a 3D printable replacement fuse box cover for the Kubota L245 tractor. • Designed for Kubota L245 (DT and F variants). • Based on Kubota OEM cover dimensions. • May also fit other Kubota L-Series tractors (such as L2500, L2600,…
Can cause serious injuries! Do not use when not in self defense. Do not use supports. i was inspired by Perfect model (better than mine), but i wasn't able to put it on the keys (stupid idea, it is so big heavy, and unpractical). Please…
UPDATE: 10 Jun 2025 added tabs on side to make it easier to pull fuse cover off. I had a missing cover on the Kubota RTV900 and decided to make one. Basic box design. It is not the original design, but it fits well and should stay in place.
This tool will prevent the flywheel from rotating on some Kubota engines. It was designed for Aixam Mega 1 with a Z482 engine, but it will probably also fit Z402 and some other engines. These engines are common in moped cars. The tool…
Some time ago I created hooks to attach to my tractor ROPS to carry long-handled tools, and several people asked if I could adapt it into a chainsaw carrying hook....which unfortunately put that idea in my head, and it became a problem I…
Starter switch for Kubota L Series tractors. It fits on a square axel with 10 mm W, 8mm H & 12mm L dimensions.
This was my first time doing the entire process from create to print. supposed to be black and orange, but it appears i missed a step, or something somewhere, but unsure .
Náhradní ovládací knoflík nastavování výšky střihu trávy pro sekací traktor Kubota GR 2120. Tisknuto z ABS bílá a černá. Popisky jsou “zatištěny” na 3 vrstvy takže nedojde k jejich opotřebení jako u originálu kde jsou vystouplé a barvené.…
Description Language: DE, ENG, FR, CZ Configurable: YES CAD Program: FreeCAD DE Bei diesem Modell handelt es sich um ein Handschuhfach für einen Kubota B1 Traktor. Das Handschuhfach wird am Überrollbügel (ROPS) befestigt. Die Box ist groß…
moves plow controls to shifter so you can shift and move plow at the same time. May need to trim tabs a little bit to not hit stuff on the control board. Do a test fit of each side to make sure everything clears.
I needed an adapter to attach my DR leaf vacuum to my Kubota BX tractor. I used orange ASA filament. Worked out really great.
This box fits in the right hand side fender of a Kubota B series tractor. Remove the blank cover from the fender and replace with this box. Print with supports Category: Other
Chipmunks were dropping acorns, making nests, and chewed up a hose in my tractors air intake assembly so I made this grill to help keep them out. Its made to fit a '22 Kubota BX2680. It is two pieces so it may work for other models.…
DUST BOOT/GREASE BOOT. FOR KUBOTA 2360 STEERING
I have made several of the improved sway bar links for the Kubota BX series tractors but always struggled with getting the holes drilled perfectly centered and evenly spaced. This drill guide lets you start the holes perfectly centered…
i cant find any available kubota size vacuum bag so i decide to make my own adapter/reducer to fit with other brand.
UPDATE: 10 Jun 2025 added tabs on side to make it easier to pull fuse cover off. I had a missing cover on the Kubota RTV900 and decided to make one. Basic box design. It is not the original design, but it fits well and should stay in place.
This box fits in the right hand side fender of a Kubota B series tractor. Remove the blank cover from the fender and replace with this box. Print with supports Category: Other
So i tried to print a Kubotan i found on Thingiverse, but the base of it sucked and didnt stick well enough to actually finish the print, so i designed my own (and made it a tiny bit less pointy while i was at it). Print Settings Printer…
Remixed Kubotan modified for vertical printing Model available at Maker World https://makerworld.com/en/models/574659 Models https://makerworld.com/@fixolab
Redesigned into a light mount with a 7mm mounting hole Printed in ASA
Dimensions: 63mm x 40mm For multiple colors: 0.00mm - 2.00mm (orange) 2.20mm - 3.00mm (black)
Air filter for kubota z402 z482 for Aixam. You need only foam and motorcycle filter oil
Replacement tractor pedal cover for rear breaks and clutch. The tractor this was used on is a 8200HD. Fits 104mm x 50mm x 4mm (w x h x d) pedal. It is meant to be printed in TPU and supports are required. I printed using 15% infill, it…
A special and ergonomic handle for gopro or action cam with gopro attachment. Inspired by the kubotan for personal defense. Load a photo if you print it !! Print instructions Rafts: No Supports: Yes Resolution: 0.1 Infill: 15%, 20%
Here's a simple sliding case designed to hold the Kubota Stubby 4.8V Cordless Drill along with all its accessories.
Anyone who finds this part probably knows exactly why it exists, but if there's any doubt, check out the photos! Fit is snug and takes the draft angle of the cupholder into account. A hole in the bottom is included for draining away…
