Counting matching models…
Awesome Skull Bowl for Halloween candy/decoration. I would love to see your makes! Post them below. This is easily one of the coolest 3D prints I've done. It was designed for no supports, but I would use supports of at least 75+ degree…
I sculpted this model on an iPad using an app called Nomad Sculpt. Fair warning: I've only been 3D printing for a few weeks now, and I'm no expert in 3D modeling. However, I printed out the skull on my MK3S without any issues in a few…
This is a very highly detailed model created using photogrammetry and manual detail sculpted in by studying the physical object. The subject scanned was a very large male white-tailed deer skull. This model involved applying the use of a…
Print approx. €7.40–€9.05 excl. taxPreliminary estimate for one variant
3D scan of skull found on the Battle of Visby, where on 27th of July 1361 the Danes fought Gutnic Peasants. The human skull found at the Battle of Visby is a grim reminder of the brutality of medieval warfare. The skull shows clear…
If you enjoy my designs, please consider a donation: https://paypal.me/melix3d all profits will go towards my local animal shelter .
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (organic/tree support) Scale it as you like :)
Print approx. €16.34–€19.98 excl. taxPreliminary estimate for one variant
*UPDATED to V2 - The mustache is now more robust. It prints very well, is sturdier than V1, and perhaps most importantly looks very suave (as all well-maintained mustaches do). I believe that this will print very well at smaller sizes if…
Print approx. €12.88–€15.74 excl. taxPreliminary estimate for one variant
A voronoi skull designed to print perfectly and not require too much support. It is prints on its nose and only requires a bit of support on its eyebrows and forehead, this can be painted on in most software but if you can't or don't know…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €11.27–€13.78 excl. taxPreliminary estimate for one variant
This is a print-in-place model with a hinged jaw that can open and close making Murray the perfect companion for the aspiring ventriloquist with a taste for world domination. Muahahahaha!!! You have the option of choosing between a…
Print approx. €2.86–€3.50 excl. taxPreliminary estimate for one variant
Print Settings Material: Gembird - Silver Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Seam position: Aligned Seam Paint: Modell back side For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract…
Print approx. €13.36–€16.33 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €15.81–€19.32 excl. taxPreliminary estimate for one variant
Use color change for a better look :) Print it with 0.28-0.32 layer height so it doesn't take too long
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
Nosferatu Skull with Deteriorating Flesh THIS IS KIND OF A MESS
Print approx. €16.74–€20.46 excl. taxPreliminary estimate for one variant
Goat Skull Throne
Print approx. €20.38–€24.90 excl. taxPreliminary estimate for one variant
This model can be printed in two colors or If you prefer to print the model in a single color I hope you enjoy it! The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed…
Print approx. €18.62–€22.75 excl. taxPreliminary estimate for one variant
Borderlands Vault key-Has texture on the upper print side of the skull plate to mimic the detail in the game art. Printed here in Silk PLA gold/silver blend Borderlands 3 Golden skull key as pictured- Printed in yellow with some slight…
This is a cool model that I found on Sketchfab by RISD Nature Lab. This model is actually quite easy to print. There are just a few adjustments you need to make before printing. Add a raft at 2 or 3 layers for the best bed adhesion (or…
Print approx. €4.75–€5.80 excl. taxPreliminary estimate for one variant
The original model was available thanks to the University of Dundee Museum Collections. Original scan available here with CC0 Public Domain license: https://sketchfab.com/3d-models/brown-bear-skull-e01dc94d20df4b888c7a6979bffb45a9 This…
Print approx. €7.00–€8.56 excl. taxPreliminary estimate for one variant
Ukrainian Folk Design Santa Skull Ornament.
Print approx. €4.37–€5.34 excl. taxPreliminary estimate for one variant
Raised nut and bridge for the Headless Baritone Ukulele
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
I created this from a coyote skull model, gemstone stls, and created a textured base in Blender. This is mostly practice for Blender. I wanted a holder for all my Pura Vida bracelets. Prints well in FDM, print flat with no supports.…
Print approx. €13.95–€17.05 excl. taxPreliminary estimate for one variant
Budova stavební fakulty ČVUT z 3D modelu Prahy https://app.iprpraha.cz/apl/app/model3d/
Print approx. €4.77–€5.82 excl. taxPreliminary estimate for one variant
Low Poly Skull Edit (8/23/2023) Fixed bottom so its flush and flat. Titled right slightly so its more centered as well. G-code and .3mf files updated. (same size now) If you want a smaller skull with organic supports you will have to…
nice scan of a human skull. You can choose to print the skull in 3 parts and the jaw in 2 parts, print the skull in 1 piece and the jaw seperatly or print all at once. First try: i printed the skull in 3 parts to make it an easy(er) print…
An easy to print human skull cut into pieces that require minimal supports. If you print with snug supports on the build plate only then only a little of the underside of the nasal structure gets 'stringy' (above the roof of the mouth). I…
Cubone Pokemon Skull For all Pokemon Lovers How To Print Since I have a small printer I printed the model in a mini version , if you would like to use this model as a helmet there shouldn't be a problem and just make it bigger in slicer…
his is a digital 3D printable model of an Anatomically Correct Human Skull based on a scan . This accurate skull replica is a perfect Halloween decoration, or simply a wall decoration/shelf display, cosplay prop, headphone holder… The…
Skull Key Switch Fidget Toy Simple fidget toy that is quickly printed and easily assembled. Choose the print bed with the emote you like in the .3mf project and print! No supports needed! Printed in approx. 30 minutes! Assembly For the…
Hanging / Sitting Skull Planter - No Supports needed for this model! Designed in Nomad Sculpt you can print and put your favorite plant in there! Two file options - with/without drain hole No Supports are required - similar to printing a…
Fancy Skull says relax, kick back and let your printer do the work! He also recommends a 10%+ infill and supports (for the cheakbones mostly).
Vader Skull. Added a version that fast-fixed the hole in the top of the helmet. its called darthvaderskullfixhole.3mf and .obj. Give it a shot let me know how it works.
A skull-shaped holder/organizer with a hollowed-out section, perfect for storing small tools, pencils, pens, or other items. You can scale it freely according to your needs. Measure, resize, print. Printed with Fuzzy Skin effect. Fuzzy…
UPDATE: Sorry, I didn't realize I uploaded the “original” remix twice, the _medres file is the new sculpt. I was wondering why everyone was printing the old version. A remix of the ChibiGrim model. Added a base of skulls for Grim to stand…
The "Skull" keycap is a bold and edgy design that is sure to add a touch of personality to any keyboard. This 3D printed keycap model features intricate details and a sleek design that captures the essence of the classic skull symbol.…
Simplified 3D model of a human skull, designed by myself to be easily printable on both filament and resin printers. Filament printing- will need support, can be printed with or without a raft Resin printing- will need supports and best…
(3/28/2024) Added a new 3mf version that is ridiculously subdivided. Dont think it changes it much. but if someone wants to give it a go. Its named the same VSKUL only its 31mb Its a stretch to say this is an original model. It's a scan…
My previous design - heart shaped ukulele is working great and i love it's sound. So i decided to make another ukulele project: ukulele shaped ukulele, inspired by that design. No more hearts. This design is an attempt to join some…
Skull eyeglasses holder that I design for my youngest son. He is always misplacing his glasses. Printed on PLA at .2 layer height and .4 nozzle. Support needed under the cheek bones.
*Update. Watermarked the Skull photos to annoy lazy Etsy scammers. *Update. Added the stand and support rod from the original file I remixed. Adjusted the mesh to replace the clipped portions of the original. This is most evident on the…
Cute skull drawstring beads for your clothes.No glue needed, just slide them up the drawstring. Easy to print! Only 2g filament per set! Three sizes available (diameter of the hole): 4mm 6mm 8mm 4mm and 6mm are properly the most common…
This expandable fidget skull features a segmented, articulated design that allows it to smoothly expand and contract in your hands. Inspired by a classic skull shape, it combines a bold visual style with a relaxing kinetic motion, making…
Printing time is about 22 minutes with a layer of 0.2. This is enough to create the effect, but you can print smoother too - 0.1. On my photos and videos, printing was carried out with a thickness of 0.2. Any opaque plastic can be used…
Epic hair pin for fasion or cosplay uses. My first hair pin model. Previosly on Thingeverse: https://www.thingiverse.com/thing:4945469/files SWORD AND SHIELD HAIR PIN ON CGTRADER:…
A detailed,(sort of)realistic-looking human skull. This is the first version of it and has some really thin areas on the nose and temporal bones, but prints fine as long as you keep the supplied(or bigger) size. Edit: Fixed to thin areas…
Everyone's favorite low poly skull beads! Properly test-printed and optimized for the best results. Hole size is 3, 5, 7, and 9mm. Print settings: Filament: PLA Nozzle: 0.25, 0.4mm Layer height: 0.10 - 0.20mm Support Type: Organic (Tree)…
Hey makers. Today i bring you this model that i intend to use as a lamp, it's Hollow and you put a 5v LED lamp (or whatever you might have laying around) inside it. The original model had a lot of polygons and i simplified it a bit but it…
Can be used for a plant, as a bowl for candies or tealight cover etc. Easy and rather fast to print, even on low layer height Original model size is 110x160x100mm Real life skull size is around 140-150% of this model --- If you want to…
Try the new and improved V2 here! This skull planter/pen holder comes in a solid version, and one with drainage holes for plants! I know you overwater them, I drowned a cactus once. You're very welcome. There is now a new jawless model,…
I printed in PLA Infill: 15% Layer Height: 0.20mm Brim: Yes Supports: Yes, organic Check another version: https://www.printables.com/model/1068118-cubone-pokemon-skull-lowpoly-keychain-remix Check my latest design for Christmas…
Crow skull, it has a multi purpose hole from one side of the head to the other. Use Brim and support for FDM machines, you might want to orient it facing upwards for best print quality.
The original model had supports within the model data. I removed them and cleaned up the surface afterwards, so you can generate your own support by your slicer in the way you think the supports work best. Don't try to print it without…
Here you have a stylized Skull Hoody Boy. The white render picture shows the 3D model you can download here, the colored picture shows ONLY a painting recommendation. Would be happy to see your makes! Take also a Look to the keychain…
Not gonna lie, some of your drips are likely to break off but it will be hard to notice. Consider this a benchmark. =P Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld…
Skull Modern Decor Figurine Read.me! I added a modifier (Bambu Slicer) to the model, which adds weight to the front part, ensuring it stands freely and is not back-heavy. This time, it's an easy print with easily removable supports.…
Pendant in the shape of a skull. 20% infill. Printing without supports.
Its a Octopus Skull. Ill probably make it into a bowl (12/8/2022) Added High Poly Versions OctoskullHP (5/1/2023) Added skull 01.stl. A fixed file by Leonardo Vieria if you are having issues with the other files in your slicer. Thank you…
Mythosaur Skull from Star Wars, Printed On Bambu lab X1C. Scaled to fit 256x256mm build plate Used .08 Layer height no supports needed. If using .2 layer height supports recommended. . . This is the way
Some supports are recommended. Scalable to any size. Sacrificial items not included. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
I wanted a skull that kept the sharp robotic angles of the original head, so here it is. A basic spooky skull for the Dummy 13. I include two versions, one with the original jawline and one with a slimmer jaw.
A fragmented skull suspended in a string frame. Print at 0.24mm layer height without supports If using Bambu Studio make sure your wall generator is set to Arachne If using Cura make sure 'print thin walls' is checked. If you want to…
This skull prints with basic tree supports and has a wide base I added to make it easy! Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
I have a huge skulls collection - so found this amazing skull by Vlad Aldea & made some changes to make it look more “human skull” & scaled to 1:1 with human skull. Printed in Dual color (Black & Red) - (28 hours)
Organize your tools with a dark twist. This realistic, weathered skull features multiple slots for brushes, pens, or tools. A perfect blend of gothic art and functional desk storage. 💙 Enjoying the Freebies? I love bringing these concepts…
It's made of two parts, jaw and cranium.
This is venom skull on symbiont base with tongue . Base and tongue is designet for faster print without support . Hole in base for tongue is biger .If you want , try scale him up a little . Happy printing.. Print instructions Category:…
Skullmask for Halloween or Pen and Paper eg. Updated the mask for less material usage. Feel free to comment if it worked! → SkullMask_v2 I would strongly recommend printing the mask as one, even if it takes longer to print. I didnt trust…
A bowl made of the skulls of 6 poor souls. Supports are recommended for cheekbones. 2 sizes provided. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
I am a big fan of skulls! Have a small collection of 10~ that printed in different shapes and structure. This one printed in Galaxy Black E-Stars PLA (need to get UV lamp to shine it up!) Original Skull model made by Michaellynn is great…
The original Scan (Atos Core 3D Scan) made by the Mammal Research Institute, Polish Academy of Science during the Open Forest Data project . You can download the original data here . I adapted the scan for 3D printing. The mandible is…
No Supports … Just Print … How about buy me a coffee buymeacoffee.com/spank7
Skull Can Holder I created a 0.5L can holder in the shape of a skull, I hope you like it. My print settings: PLA, 0.2mm layers, 3walls, 10%gyroid, Tree supports Happy printing:)
UPDATE: 3# I added a loop for 10mm wide elastic band. I modified the lower jaw attachment: simply insert a pin through both the upper and lower sections and glue it only to the upper section (DO NOT GLUE IT TO THE LOWER JAW, OR IT WON'T…
A pretty skull with flowers. Well, pretty weird and maybe a little scary but oddly nice. I think... I think she likes me. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Add a bold touch to your shelf, desk, or workshop with this battle-hardened beauty! Some supports needed, organic type works great. Happy Printing!
Original part : https://www.thingiverse.com/thing:4946522/files Enjoy
Support free mushroom skull jar with lid. The lid is not support free. Updated The Less Scratchy with the sharp interior point of concern that causes scratch tribute was removed. Also added an .STL file for convenience. I'll be happy to…
Found this 2014 model by Makerbot Tips: I have custom painted the organic (tree) supports on the slice I'm including. I found them to be the most efficient placing and effective supporting. Be careful and patient when removing them. I…
Epic hair pin for fasion or cosplay uses. This is my second addition to hair pin models first one was uploaded on Thingeverse: https://www.thingiverse.com/thing:4945469/files or on Prusaprinters:…
Used Poly.cam to scan a floral detail Halloween themed skull. Thought it came out really well and wanted to share it. Etsy Page: https://demambaprints.etsy.com Tik Tok: https://www.tiktok.com/@demambaprints Polycam scans here:…
Pretty simple low poly remix of a skull. Used it for a headphones holder for my wife (may need to scale up a bit, depending on the size of your headphones) Printed on Elegoo Neptune 3 Pro in eSun Matte Black PLA at 0.2mm Print with tree…
The bowl is sort of triangular so I pulled the back out to make it more oval. The westers47 remix was widened on the bed and printed (silver) and then deformed in blender to open the bowl cavity (white). I also pushed up the pallet…
Wicked Skull Dice Tower. (UPDATED) UPDATED FILES: 4/28/2024 5:28PM CMT. NamingConvention: skulldicetowerfin (OLD FILES REMOVED) Thanks for your Input Raptor King. This is why I adore this community. Awesome feedback. New uploads have…
Crow on Skull. Heavy fixes. This file was a disaster. Post sculpting. Selective smoothing. Original Modeling in blender by: "Skull and Crow - NPR Shader" (https://skfb.ly/oFLAQ) by Szyszz is licensed under Creative Commons Attribution…
Hello everyone. After someone reached out about copyright issues, I have decided to change the mounting system from the default, to my own. It has the same 40 by 40mm rectangular mount but has been changed from the original. The screw…
🇲🇽 Welcome to Yucatán, Mexico! Ancient Ruins , a dedicated sub-collection by MiniWorld3D about past civilizations, presents: Mesoamerica. This model was created by Artemio García . This is available in two versions: Actual state (ruins)…
Scale to any size. Perfect for Halloween or hot days. Check out my other SKULLS! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
A sitting flower pot in the shape of a skull without jaw. Supports needed only on contact with the bed
Inspired from the anime Bleach, this skull hairpiece with katana stick is modeled off the mask worn by character Nelliel Tu Odelschwanck early in the series. Perfect accessory for Renne faire. Sword handle prints separately and will need…
💀 Skull Keychain – A Tiny Touch of Edgy Cool Need a little flair for your keys, bag, or backpack? This 3D printable skull keychain is the perfect mix of spooky and stylish. Compact, cleanly designed, and easy to print, it’s a fun quick…
Print Settings – Approx. 6–8 hrs print time on a Creality K1 (0.20 mm layer height, 6 walls, 15% grid infill, PLA+ recommended). Tree supports enabled with a 30° threshold and placed on the build plate only for easy removal. Brim adhesion…
![Voronoi Skull [remix]](https://media.printables.com/media/prints/858002/images/6593823_fdd9685b-c5d3-4b7a-8140-19b0d2dbdc92_d7509dcb-6470-4689-9f08-a7458615d0f6/2024-04-19_7d7ae7a7bc2618.webp)
