Counting matching models…
Bobble the head of your favorite Decepticon Military Operations Commander! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with…
Print approx. €1.58–€1.94 excl. taxPreliminary estimate for one variant
This is a remix of a remix! Asdesign's remix of MakerBot's flamingo is quite charming, but I didn't like its splayed-sideways leg position. I decided to remix it to put the legs in a forward/backward “walking” position. The flamingo…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
After my last move these hooks were broken, so I had to make a few of them in order to assemble my wardrobe again. Working very well, better than the original ones. Uses minimal supports, done by painting them in PrusaSlicer. I usually…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
Space Port Platform Walkway For use with the Space Port Platform Lift Module ( https://www.printables.com/model/231303-space-port-platform-lift-module ). These walkways allow you to connect your platforms, patrol the area, and watch out…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
A set of Customizable Mock Suppressors for your KWA M11A1. I also threw a smaller “one piece suppressor” in. Combine them however you want. They fit a typical AceTech Tracer Unit. Supports are a little more difficult for this model. MS -…
Print approx. €5.46–€6.67 excl. taxPreliminary estimate for PETGSource material: PET
intro This is a 7in backwater valve access cover I made to cover the valve access in the basement floor. The original one that was installed in my house was very thin and my floor is very uneven at that location wich caused the cover to…
Meet the 30mm CO₂ Fun Grenade – where creativity meets excitement! Designed to turn engineering into play, this 3D-printed grenade (PLA, or any lightweight material you prefer) is made to look awesome, feel cool in your hands, and deliver…
Milwaukee Shockwave box V 2 Added Chamfer to the ends V 3 Shortened the arms for a tighter fit V4 6 mm hole V5 6,1mm slotted holes for div pegboards
A NERF silencer modeled for my son's Elite 2.0. It can probably fit other models. It should be printed as it comes without support.
This is an 8 piece Gridfinity set for organizing the Milwaukee Shockwave impact socket set. It may or may not fit other brands of sockets.
Holder inserts for the Milwaukee Shockwave case for 1/4" hex shank 1" long bits. Bits are held in magnetically. The Milwaukee Shockwave case (large version) has a modular design that allows you to use different types of holder inserts.…
A remix of a remix This is made to fit mil spec buffer tubes but the original 5/16 bolt is just too large and loose for my needs, So I added a insert to make the screw size smaller to M6 which is better fitting for the tube and double the…
SHARK SKWAL I3 GO PRO chin mount. No support needed if printed standing up.
Remix of shockwave box holder so it will attach to wall control pegboard system. Added countersunk holes to fit flat head screws.
As many know, the Raspberry Pi 4 can struggle with high CPU temps and overheating. I've designed a simple fan mount to attach a 30mm fan to your Pi to help cool it! There are a few versions with 2 or 3 screw mounts. There are versions to…
Copy of the original OPSol adapter for Mossberg shotguns. Adapter allows use of 12ga 1.75″ Birdshot, Buckshot, and Slug Shells Only fits: 12ga Mossberg® 500, 500A, 590, 590A1, and Maverick® 88 models, and the 12ga Shockwave Firearm Should…
The default holders for this set aren’t very good, so I made new ones You can also stack all the bits on one side, which leaves room for other bits on the right. I also included a version with the ½" bit holder in place of one of the 1/8"…
Holds Milwaukee Shockwave boxes. Holes widened to fit Multiboard small threads, and lengthened to clear snaps.
I made this walkway for a piece of table top terrain I build. It is scaled for 32mm games like Warhammer, Kill Team, Necromunda ect. but will be usable for Star Wars Legions as well. Size assempled: Length: 100 mm Width: 54 mm Height: 28…
You can attach this poop chute container at the back of the P1P. It is now V2. Some improvements see the difference between the pictures and the model. A bit shorter, better posibility to get out the poop left and right wall for the…
The official description of this item, as per WotC, indicates that 2 medium creatures can fit inside at the same time, and that this item is considered large. This seems impossible. It is now well over the "large" footprint, but looks…
This disc is modeled off of the Axiom Paradox. (5/4/-4/0) At the moment I've only got one to print okay-ish on my printer and it flew very similar to the Paradox. Flippy but not too flippy. Still a work in progress but print it and give…
Witam, do pobrania mojego pomysłu i projektu odpieniacz białek do akwarium morskiego, odpieniacz przeznaczony do pracy z pompą Jebao DC 3000 lub 4000, mogą pasować inne pompy trzeba sprawdzić. Film z Budowy: Odpieniacz na rurze plexi…
New version doesn't require added supports (Though a perimeter can help) The first three images show the new version, the rest of the images are for the old version
http://www.modellbau-wiki.de/wiki/Behelfspersonenwagen A MDyg 986 in gauge 1 (1:32) will be ~700 mm long. Luckily the Deutsche Bundesbahn MDyg986 "Behelfgepackwagen" is very symmetrical. I "only" needed to design a quarter of this express…
I modeled three different walkways in two different styles using CadQuery. suitable for miniature wargaming. --- For more details, videos, printing tips, and part specs go here: https://miniforall.com/walkways.html This is an open source…
2024-FEB-7: Lost track of my files a bit, but uploaded several I had in the mix over the last week… the V2 design is stronger and does not have the flanges on each end. *** Iterated a bunch to get a minimal design that is still strong…
https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and roleplaying game terrain for your home 3D…
Why buy when you can CAD. I still had to purchase the hose to carry the water to a better area away from the house. The knob is a press-fit (at least on my printer) for an M5x25 bolt typically found in printer fastener kits. The hole is…
This is part of the Apollo Crawler that transports the Saturn V. The walkways go all the way around the crawler. Below the walkways is a two tier cable tray. Notice that between the two cable trays I added some small black wire. Note:…
Model was ripped from Fortnite using the Fortnite Porting tool for Blender and modified slightly with meshmixer and a few other programs to get to a printable state. https://github.com/halfuwu/FortnitePorting Included are two versions,…
Two brick walkways, one 40mm wide and the other 20mm wide, for O-scale (1:48) model railroad.
Simple and aesthetic pots, with a ridge pattern. One large and one small.
For magnetizing, I recommend 60 mil flexible magnetic sheets (I haven't added them yet in the pictures). I am using Dragon Shield matte sleeves for the regular sized cards, and BCW "Continental Postcard" sleeves for the large format cards…
Holds New Milwaukee Shockwave boxes larger version, can be a bit tight. The idea came from moldel https://www.printables.com/model/125957-milwaukee-shockwave-box-holder Thank you. Reccomended: Print with 3 walls
Just a fun mashup I slung together. Supports are needed for this model. Remixed from these two files: https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson…
Mount for Honeycomb Storage Wall for the Milwaukee Shockwave boxes.
The Shockwave holders that came with the kit were very stiff and made it hard to pull the bits out. I've made essentially the same style of holder but now it's much easier to manipulate the bits. It still has the nice flip up ability of…
This is for an airsoft model and will literally not work on the real thing, which has a totally different mounting system, don't waste your time. This is a quick and dirty buttstock rail adapter for the KWA/KSC VZ61 GBB/GBBR Airsoft Toy.…
A Ikea Skadis shelfs with external hooks after the idea of another thingiverse collection (https://www.thingiverse.com/thing:2853261, IKEA SKADIS Collection (easy print / tight fit)). The hook allows a bigger wall thickness so that the…
🇬🇭 Welcome to Ghana! This model was designed by Dany Sánchez . The Kwame Nkrumah Mausoleum is dedicated to the prominent Ghanaian President. The memorial complex was completed in 1992, situated in a 5 acre park in Accra, capital of Ghana,…
The Milwaukee M18 18-Volt Lithium-Ion Cordless Jobsite Fan can be powered by a M18 battery or the included power supply. This was designed to hold the power supply while the fan is not in use.
This is a remix of the platform from pitithom and base from gynovin https://www.thingiverse.com/pitithom/designs https://www.thingiverse.com/gynovin/designs Category: Games
Kwai whale shaped cutter for polymer clay, cookies or crafts - Cortador en forma de ballena kwai para arcilla polimerica, galletas o manualidades
Project still in development! Geschichte Dieser Wagen wurde 1898 in Köln für die Nordhausen-Wernigeroder-Eisenbahn (NWE) gebaut und erhielt die Nummer 156. Im Gegensatz zum Wagen 154 hatte er kein Postabteil. Heute ist dieser Wagen in…
Standardowa zaślepka profilu w kwadracie 15 mm - może być również jako nóżka.
note: This is not my design. My name is Eric and I'm a long-time volunteer with eNABLE (you may have met me at ERRF/3DPrintopia). I am curating eNABLE designs to share with the Prusa Community. As an official representative from eNABLE…
Intex 1.5" pool backwash to garden hose adapter
This is a Skadis hanger for the new packout version of the Milwaukee Shockwave bit cases. The only hangers I could find online were for the older style that had bigger rectangular cut outs. The newer cases have smaller cutouts that are…
Kwai rabbit shaped cutter for polymer clay, cookies or crafts - Cortador en forma de conejo kwai para arcilla polimerica, galletas o manualidades
Just a simple holder/organiser for 4 Milwaukee shockwave boxes The walls are 2mm thick the more wall loops you use the stronger it will be, I printed with 3 walls in PETG and seems pretty tough
This is a remix of Pappadakko's redesigned dashcam mount for the 5th-gen 4Runner to work with the U3000 rear camera. I printed it in ABS to help prevent warping from heat in the summer. I recommend installing the camera on the…
GoPro Halter für Shark SKWAL 2
Insert holds: M12BLIDRC M12 battery (in my case M12HB2.5) M12TC2 USB charger Small compartment in the back for bit holder or other small parts Remaining space of the organizer is used to store a SHOCKWAVE Set 38pcs (4932492009) or other…
A rail mount for the KWA 1911DS airsoft pistol. Category: Sport & Outdoors
Schrauben/Screws 12x M3x12 PETG Schichtdicke 0,20 Infill 20% PETG Layer thickness 0,20 infill 20%
Here are two more walkways to add to the collection. There will be different styles/types and layouts of these walkways in the next few days. Category: 3D Printing
The walkway goes all the way around the crawler. The walkway parts are laid out in the attached photo.
note: This is not my design. My name is Eric and I'm a long-time volunteer with eNABLE (you may have met me at ERRF/3DPrintopia). I am curating eNABLE designs to share with the Prusa Community. As an official representative from eNABLE…
All credit goes to Daniel Wilson - all I did was add magnet holes. The original model remains untouched otherwise and fits the socket set like a champ.
Description UPDATE 14-11-2023: I reuploaded V8, because it had a wall which prevented the lowerblock from fitting properly on the powercord side. These prints will allow you to create a bracing for the Ender S1 plus z-axis, making it more…
I've never found any Necromunda bridges/walkways that I liked. I've tried to find something that has sides/walls, looks "good", isn't too chunky, & prints FDM as one piece w/ no supports. So I made my own. These walkways (or bridges) are…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I am currently designing some terrain for Necromunda / Warhammer 40K, this includes Walkways, buildings, pipe work etc. This was todays effort. Feel free to provide feedback if you print this. I have not printed this myself yet, so if you…
BlackWarGreymon Digimon Creature Model
This model is compatible with the lego system.
Support pillars for wargaming
Basicly Mikkels Ender 5 Pro Strain Relief Curved but instead of having the cable go towards the front of the printer it curves towards the back of the printer instead. For me this was a better cable management solution.
A personal take on the Apparatus that I have never liked the published version of. Original Concept belongs to D&D.
The Skwapler is a remix of the grip and body panels from Captain Slug's stapler gryphon, adding holdster support and a grip which can contain a 950 mAh 3S battery. The Skwapler uses a manual pusher and dual stage trigger with a cherry…
Kung Fu - Kwai Chang Cain (David Carradine) - 1972-1975 3D printable model.
Wichtiges Update 2024-10-07: Offene Variante ersetzt, da sich die Längsträger mit Radaufhängungen sich beim Export der angepassten STLs aus FreeCAD nach weiter innen verschoben haben. Geschichte Erbaut 1898 von Herbrand für die…
BR218 compatible to IKEA, Lidl or Brio wooden train systems. The whole model can be plugged together and will be fixed with 4 screws: 4x M2x5mm 8x M2x18mm 4x M2x25mm 2x M2.5x15mm The wheels can be put in a metal 2mm shaft with a length of…
Tefillin with a print of the Lubavitch Rebbe in the shape of the Lubavitch World Center. 770 Eastern Parkway - Chabad World Center, known as 770 after the house number, is a Chabad Hasidic center that also served as the beit medrasham of…
This model is compatible with the lego system.
Charge! Get them, now! Walkways are essential terrain for any skirmish wargaming, be it Mordheim, Infinity, Warhammer 40k, Necromunda, Kill Team, Warcry, Age of Sigmar, or Dungeons and Dragons. It can also easily be used as a make-shift…
Made a model to add light switches and usb port for VW Crafter. Probably works on other cars of that type.
Here is the model for my Shockwave Egg, a fun little model for your Easter decorations. It has a flat base but I still printed mine with just a little support from the print bed for the very bottom of the egg. I hope you enjoy. Happy…
No supports needed!
Add a touch of speed and style to your decor with this Kawasaki 2D wall art! This STL file features a sleek and detailed design of a Kawasaki motorcycle, perfect for enthusiasts and fans of the brand. The intricate lines and curves…
A Carbine Kit for the KWA M11A1, to modernise it with an optics mount and better ergonomics. Available in righty / lefty. I recommend to print it in PLA or PETG. All models are orientated for optimal printing. Print Settings are attached.…
Kwai-shaped cutter for polymer clay, cookies or crafts - Cortador en forma de kwai para arcilla polimerica, galletas o manualidades
Reel to easily wind up a flat backwash hose for a pool filter. Sits flat on filter platform as well. Simple and quick remix of “StorageB's” Rope spool. makes it neat and easy to store the backwash hose for your pool filter. I printed on…
Project still in development! Geschichte Dieser Wagen wurde 1898 in Köln für die Nordhausen-Wernigeroder-Eisenbahn (NWE) gebaut und erhielt die Nummer 156. Im Gegensatz zum Wagen 154 hatte er kein Postabteil. Heute ist dieser Wagen in…
Eine kleine aufsteckbare Wasserwaage für ein Stahllineal, z. Shinwa. Um Schraubenspuren zu vermeiden, habe ich 5mm Kugelschnäpper verwendet Der Halter ist für eine Libelle von 40 x 10 mm vorgesehen Die beiden oberen Halterungen…
Een deksel voor reeds geopende verpakking van Danio Romige Kwark. Designed with Fusion 360. I printed it with PETG on a Prusa MK3. No support needed.
This is my fairy door tree walkway with a hand rail so none of the fairies will fall off. You can add to a tree to connect doors, windows, or balconies. It is flexible to allow you to bend it around the tree. It is 3cm X 3cm X 18cm and…
A bit holder designed to hold Milwaukee SHOCKWAVE impact driver bits on a Milwaukee M12 Fuel ¼" impact driver. I originally designed this for my Uncle who daily drove it for a while. I recommend using a filament like PETG and not PLA for…
Modified the 24mm model below, to fit the Craftedkwads Freshman frame- 25mm mount for Radiomaster RP1 antenna. Printed with TPU, 50% infill, supports on build plate only.
These brackets allow an SFX power supply to be mounted with its connector side facing the existing cable channel on the Z20 computer case, in the style of BTS or Project Zero motherboards. This cleans up the interior of the case and might…
A deluxe scale shockwave blaster with 5mm handle.
The mount for my X500 went off to the scrapyard with my car after a crash but the camera was fine. Replacement parts for this old camera are hard to find so I made one myself, based on my memory of the original, and printed it in PETG.…
Basierend auf meinen früheren Bauten von Gepäckwagen wie 905-153, 905-152, 99-01-85 und 99-01-83 wurde der letzte dieser Baureihe von Gepäckwagen entwickelt. Einige Teile sind verbessert, Kupplungen und Innenwand sind jedoch austauschbar.…
Bonjour, Voici une pièce de remplacement pour votre réplique fusil d'airsoft GBB GBBR KRISS VECTOR de chez KWA. Cette lèvre de chargeur ou mag-lip est une pièce introuvable mais heureusement l'impression 3D est là ! Je n'ai pas réussi à…
