Counting matching models…
An abstract sculpture using a simple snowflake shape as a cutout from a cube. It could act as an artistic design, a trophy or award, a cardholder or even a cool pen or pencil holder if you size it right. This model was NOT created with…
Something I made during 2020. The middle layers are of clear PLA and the bottom and top layers are whatever color you'd like. R-Rated and G-Rated versions available. No supports required.
A tree ornament I made a few years ago for a humanist organization. The middle layers are of clear PLA and the bottom and top layers are whatever color you'd like. The number of perimeters is high because I found that it printed better…
Bookmark with raised snowflakes and border. I like the border better but that's just me.
Christmas Corner Snowflakes change the layers to change the colour combo, takes ~3hrs to print. Fun piece to give instead of Christmas card.
This small stud for the large lego wreath has added small detail with a snowflake.
Snowflake napkin holder makes any table look a little cooler. Prints flat and snaps together. Looks good in a single color, or make it pop with some color swaps. Tight and loose versions included depending on your printer tolerances.…
Print Settings: • Recommended Material: PLA, PETG, or any sturdy Supports: Not required. Supports: Not For a beautiful finish, print with white filament or vibrant colors. • If planning to use it outdoors, PETG or a weather-resistant…
I added this in 1 of the 6 panel windows for granddaughter gifts, the others were 2 color snow flakes. Another panel with just the tree for your own text Thanks to invader for the awesome Christmas tree file !…
I recommend printing it with at least 0.2 mm layer height or higher. Happy printing :)
make shadow of snowflakes and bells pattern
Better stars for less drooping first layers on the snowflakes. Box is scaled to 150%
This house is not limited to just candles! Even though this house was originally designed it to house a candle, as shown in the pictures, you can fill this house with anything , it is extremely versatile, so you can showcase your…
I designed a snowflakes lithophane tea light ornament you can hang or stand. For LED tea lights only!! The main sphere is 70mm in diameter, with a lithophane shell to allow some light through that too in varying degrees. The snowflakes…
snow flake for Christmas. 28cm wide. Print 4 times the file1 and once file2 and file3. I was able to assemble the flake without glue.
I just altered for MMU. As well as resize, embedding on a rounded over 75 mm disk placed a cut out so the two parts could be inserted (flipped) and match up. There is a hole for a small eye hook (www.amazon.ca/dp/B07ZM5SGM8) as well. Of…
This mount is designed for the left front corner of a Voron 2.4. It is suitable for the Halvklart / KAPPLAKE LED from Ikea. Printed everything with the usual Voron settings. As a negative volume, the Voron logo was added , modified and…
English: I previously encountered a Gravitrax snowflake model with a 2.8-star rating, criticized for flawed design. I printed it to challenge these assessments, yet replicated the same design flaws. Consequently, I submitted a 2-star…
🇺🇸 ENGLISH VERSION Christmas Ornament Cookie Cutter and Stamp featuring a snowflake design, perfect for festive baking and holiday decorating. Great for cookies, biscuits, fondant, cheese, bread slices, modeling clay, and more! Snowflake…
glendalough in hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Cyan At layer #9 (0.8mm) swap to BambuLab Green At layer #10 (0.88mm)…
Christmas tree bauble containing a snowflake. Use string or thread to secure the bauble and the snowflake.
Okanagan Lake is the largest of five inter-connected freshwater fjord lakes in the Okanagan Valley in British Columbia, Canada. Named after the Syilx Okanagan Nation that have lived in the valley since time immemorial, it was created when…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com. You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
A snowflake ornament that holds 40 mm candles. Since the candles gets hot, I suggest printing from ABS and putting some tin foil inside the snowflake, there is enough room to do so.
Add a magical twist to your holiday season with the Snowflake Spinner , a beautifully designed print-in-place fidget toy shaped like a detailed winter snowflake. Perfect as a Christmas gift , stocking stuffer, festive desk toy, or even a…
HARDWARE: 1x generic ornament hook PRINT INFO: any filament of choice (i used blue ABS), any infill (i did 70%), no supports, optional brim.
Create a touch of winter magic with these intricate 3D-printed snowflake ornaments. Each design is inspired by natural ice crystals and features delicate geometry that prints cleanly on standard filament printers. Perfect for holiday…
A playful, interactive, and customizable 3D printable holiday decoration Bring your Christmas decorations to life with the Spinner Snowflake Christmas Tree ! ✨ Inspired by my original Snowflake Spinner , this model transforms simple…
Description ❄ Frost Flyer – A Snowflake That Actually Flies! This 3D printable snowflake isn’t just for decoration — it flies like a frisbee! Perfect for winter fun, desk tossing, or simply showcasing your print precision. 🧱 Print…
A storage container with a snowflake relief. Profiles: Large Single Color 50% Small Multi-color
Simple Christmas snowflake ornament with a loop for hanging on a Christmas tree. The model is optimized for easy 3D printing without supports and is beginner-friendly. Perfect as a holiday decoration or a small gift. Perfect for:…
🎄 Snowflake Ornament Set – Clean & Minimal Design This is a set of 3D printable snowflake decorations, designed for winter and Christmas use. The model includes 4 variations: • 2 different snowflake designs • Each design comes: •with a…
真ん中には十字の形 デザインコンセプト この「スノーフレーク フィジェット」は、雪の結晶の幾何学的な美しさからインスピレーションを受けており、芸術的なデザインと機能性が融合されています。 使用 仕事中や勉強リラックス中に集中力を高め
Affiliate links for my favorite filaments to help support what I do are here: Linktree All 5 magnets print in around 1 hour of printing time. My wife likes to hang magnets around her work so I made these for January. Hopefully these will…
Student-created 3D snowflakes from Teen Maker Hour. Created by filling in variables in the Tinkercad Codeblocks Snowflake Generator to create the 3D snowflakes for 3D printing. Every time you run the code, the snowflake renders…
This bas-relief wall art captures the stunning downtown Chicago skyline as seen from Lake Michigan, in a classic low-relief style. Iconic skyscrapers are exaggerated in height and detail for visual impact: Willis Tower (with antennas)…
Design Concept The design features a humorous caricature of a person wearing a Lakers hoodie, aimed to appeal to basketball enthusiasts and fans of the team. Purpose It serves as a fun accessory for Lakers fans, ideal for a keychain or…
A simpler version of Models like Calistar or Califlake, but with Dimensions of a Calibration Square, like the Klipper Skew Correction Model but with Caliper Stops and two sided Measurements. It works without a spreadsheet and you only…
This is both boot prints. with a snowflake 🚨 WANT TO SELL MY 3D PRINTS? Join my $2/month Buy me a coffee membership and start making money with my models! http://buymeacoffee.com/printandsell
Modern wall decoration. These models are split into multiple parts and require assembly after printing.
Storage container to hold spinnaker or any lines on a sailboat. I printed it with PETG. If you modify the FreeCAD file be prepared to redo the fillets. They don't play well with some changes but it's not too hard.
I wanted to make use of the IKEA kapplake that I had laying around make a first attempt at a lamp have a base for changing to other lamp shades I wanted to keep the kapplake's ability to press the lamp to turn it on and off again which…
This is a snowflake Christmas ornament that I made because I needed an ornament I could print quickly on my kind-of-slow printer.
Crater Lake, Oregon — 3D Terrain Model This 3D model represents Crater Lake National Park and vicinity (Oregon, USA), generated using high-resolution elevation and bathymetry datasets and processed in QGIS . The model integrates multibeam…
This is Level 6 of the Sierpiński Snowflake Fractal Pyramid , adding another layer of recursion to the series and producing an even more intricate geometric structure. The model represents one half of the full form. It can be displayed as…
Sensory pad for children. Supports the development of motor skills and creativity.
Topography Hardergrat Lake Brienz 1:110 000 , VE 1.0 This print is the Perfect preparation before going onto the Hardergrat trail. Data source: swisstopo
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
I use the Decathlon CAPERLAN Lakeside 100 (7m) as a lightweight mast for my portable antennas. To make the setup easier in the field, I designed this simple ground base. It keeps the bottom of the pole exactly where you want it while…
❄ Snowflake Coaster & Holder 2.0 (level up your winter game) Your drinks deserve better than boring coasters. This updated 3D-printed snowflake coaster set comes with a sleek, redesigned holder and new geometric patterns for next-level…
18 Snowflakes with approx. 50 x 50 x 2 mm for Christmas decoration. Put your favorite snow flakes on your window, gifts or decorate your Christmas table. 09.12.2025: Added two more snowflakes See also my original snowflake collection with…
Inspired by fixumdude’s Snowflake Tie Fighter , I downloaded Maxime’s Millennium Falcon model on GrabCAD, modified and redesigned it for better printability and added a snowflake cutout, using a snowflake design from Lia Aramburu . If you…
For lovers of cookie cutters I've made set of 4 cookie cutters in shape of snowflakes. Cookie cutters are made of 2 parts - cutter and inner stamp. UPDATE 02.11.2023 - added v2 for cutters based on feedback about “edges” being too thin…
Druck: 0,2 mm Düse: 0,4 mm Unterstützung: Nicht erforderlich Rand: Nicht erforderlich Eine schöne Adventszeit und viel Spaß beim Duck, über eine Rückmeldung würde ich mich freuen.
A collection of Christmas models that can be used as tree decorations, ornaments or keyrings/keychains. Includes a snowflake, gingerbread man and "xmas so it is!" text. Bonus points if you can name the city this saying is from.…
Snowflake inspired ice scraper. The sides are smooth, sawtooth, serrated and rounded edges. Its size is about 20 cm from corner to corner. I printed it downscaled to 50%. Its size is about 10 cm. Pocket size. I used a Creality Ender 3 V3…
Printed with no top/bottom layer. Use diffrent infill/infill % for special look. Printed in PLA/PETG. One snowflake takes about 10min to print.
Deutsch: Dies ist eine Schneeflocke, die Sie zusammenstellen können. Ich empfehle, diese Festzukleben. Englisch: This is a snowflake that you can put together. I recommend sticking these on.
This is the nineteenth version of the snowflake ornament. This is a snowflake variant and will easily print on most FDM
This is the twentieth version of the snowflake ornament. This is a snowflake variant and will easily print on most FDM.
This 3D model presents a snowflake rubber stamp crafted in two separate sections: a TPU stamp for precise detailing and a stable body. These components can be joined together using glue, with a 0.5mm tolerance designed to ensure a precise…
The flake has two different depths, so use support, or try the *_Even.zip file. Also a DXF File is added for laser cutting.
I would recommend printing this in tpu and using a little string to make the wrap or even tpu. you could even put these on a Christmas tree. I will link to the second iteration.
This makes a great gift! Wear this on days when you can feel boredom coming on and relieve tension by having a spinning fidget toy always within easy reach. Or wear the fused version when you want the style without the temptation. It also…
My partner loves Doctor Who so i designed a snowflake using the Shadowflake / Snowflake by roman_hegglin. Mostly done on GIMP and Tinkercad
Gyroscopic snowflake decoration with handy hole for hanging (on x-mas tree, …) 4 can be accomodated in Prusa Mini+ Name can be easily changed in attached Fusion file Model finetuned for 0,2mm layer setup Warning!: make sure that all parts…
Customized version of http://www.thingiverse.com/thing:1159436 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=1159436 Instructions Using the following options: random_seed = 5838682 long = 5 organic = 3…
Customized version of https://www.thingiverse.com/thing:1159436 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1159436 Instructions Using the following options: random_seed = 9999999 custom_seed = 0 loop…
Cross Stitch Floss Organizer/Sorter tool Summary Cross Stitch Project Floss Organizer - Snowflake Cross Stitch Floss Organizers – Fun and Functional Crafting Companions Elevate your Cross Stitching and Needlepoint projects with our…
This is a hook that you attach to a fishing line and drag it across a lake floor to find lost GO Pro's.
