Counting matching models…
Simple friction fit under desk mount, I have an undermounted laser on mine so i added space to accommodate that. (my laser is the same width as the pistol but adds an extra 20mm under the barrel so take that into account for your lasers,…
Get a visual on your laser's focus. Simple and easy to use with inexpensive aluminum business cards from Amazon. Make a sharpie mark about halfway up the ramp and use that mark to set focus with your ruler as you normally would. See…
This video not only shows how these laser crosshairs are installed and work on my DIY plasma rig, but also details how I designed these holders from scratch — from start to finish using SketchUp (free 2017 version, the last free version…
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
This project is basically a laser engraver frame designed to work with leftover TAZ 3d printer pieces and whatever stuff I had laying around. It should be pretty easy to adapt to whatever size or bearing setup you would like to use. The…
easy to print / one piece Air assist nozzle for most K40-Lasers. It's the updated version with a normal 12V blower. So there is no hose in the air. break away supports included ;-) Print Settings Printer: Upgraded Geeetech i3 c Rafts:…
Ich habe es aufrecht stehend mit Baum-Supports gedruckt.
Protective plugs with magnet holder for Gweike M-Series CO2 lasers Protect your CO2 laser mirrors from dust and debris Soft compliant TPU material Magnetic holder base for easy placement 4x 12x5mm neodymium magnets Printing notes: Plugs…
This is a spatial filter for laser beams. If you wish to support me: https://buymeacoffee.com/andratos95 EDIT: The V2 versions have been added because I noticed that inserting the spring for the XY stage was significantly too hard than…
This is a gcode-file which is burning several filled rectangles on your material. I choosed to go from 10 to 100% in ten steps and for the speed I started from 300mm/min up to 3300mm/min in three hundred steps. Be careful, some materials…
Dit is het bestand van het palet dat we gaan gebruiken voor lasersnijden. Importeer het .SVG bestand in Inkscape. Vanuit daar werken we verder!
Designed to enable the positioning of a laser engraving and cutting module on an Openbuilds LEAD CNC machine, this object has been designed to work with engraving and cutting laser modules from Opt Lasers. This file can also be accessed…
Designed to make the working distance calibration more straightforward and easy-to-follow, this item can help you set the position of your engraving and cutting laser module to 35 or 60 mm from the working plane. This object has been…
Based on a meme image going around. First 2 mm in white, 2 layers of red, 1 layer of black at 0.2 mm layer height. 200 mm by 120 mm Resize as desired.
Storage for the different parts of the Dungeons & Lasers dungeon tile system for Gridfinity. The 3x2 sizes have storage for connectors because I needed to fill the extra space but I would recommend you store most of your connectors in…
Bellow you will find the list of materials and the assembly instructions. Bill of materials Here is the BOM with links: 230gr of Transparent PETG - Geeetech $12 per 1kg spool 5 ⨉ 100mm 2020 Aluminum Profile - $5 per 4pcs 1 ⨉ 300mm 2020…
This blueprint spawns a mount for Workbee CNC machines. It allows one to mount an engraving and cutting laser head on a Workbee CNC machine. The object was designed for cutting and engraving laser heads from Opt Lasers. It is also…
This STL file spawns a Prusa i3 MK3S laser mount, which helps you to mount a cutting and engraving laser on your Prusa i3 MK3S 3D printer. This object has been originally conceived to mount a 2W engraving and cutting laser head from Opt…
EN: These are two 3D laser scans of a Panasonic ES-LV67 shaver using the Creality Sermoon S1 and Shining 3D Einstar Rockit 3D scanners. The scan on the left (green) is from the Sermoon S1 and the one on the right (orange) is from the…
Print with your normal settings, fancy pants print at 0.1. Filament change friendly with the red raised 0.5. So white, black and lastly red.
Designed to enable the attachment of an engraving and cutting laser module onto an X-Carve CNC machine, this object can help to enhance your CNC with laser cutting and engraving functionalities. The item in question has been designed for…
The file contains a CNC 3DP Laser Nozzle intended for mounting on an engraving and cutting laser head from Opt Lasers. The emergent object can be used to direct the airflow from the engraving and cutting laser head’s fan into the working…
This step file generates a cutting and engraving laser mount for your i2R CNC machine. It can be used to simplify the attachment of an engraving and cutting laser head onto an i2R CNC machine. The blueprint has been originally designed…
Adapter to fit the Opt Lasers PLH3D-6W to the Z-Axis Kit from Eleksmaker. You can use the scad as a general template for modifying the Z-Axis Kit. The tolerances are important to work good. Use the test module of the scad to check you…
Schild für die Laserstrahlung (Mr. Beam). Verwenden auf eigene Gefahr. Bitte vorher mit dem Sicherheitsbeauftr. checken.
EN: This is a Creality Sermoon S1 scan of a chestnut. The scan was created with a resolution of 0.2 mm and blue cross, parallel and single lasers. I also did an infrared scan. — I would be very happy if you have as much fun with the…
The object you can make with this file is a CNC Laser Mount. This mount can be utilised to attach a blue engraving and cutting laser module to your CNC machine. This can give you the advantage of adding a laser processing functionality to…
This step file generates a Shapeoko CNC laser mount. The resulting item can be used to enhance your Shapeoko CNC machine by adding laser cutting and engraving functionalities to it. The blueprint has been primarily designed for use with…
EN: These are two 3D laser scans of a carved East African candle holder, made with the Creality Sermoon S1 and Shining 3D Einstar Rockit 3D scanners. Both were scanned with 0.1 mm resolution and standard settings. Both scans have 1…
This file contains a free step file for the Opt Lasers Hobby CNC engraving laser head, which can be mounted on CNC machines and 3D printers alike. It is also available at: https://optlasersgrav.com/ Further information about the Hobby…
Designed with CNC machine users in mind, this device can be used to make the task of mounting and dismounting your Opt Lasers engraving laser head much easier. As a result, you can add the engraving and cutting laser functionalities to…
In order to perform a laser cutting or engraving operation on your CNC machine, you need to mount a suitable engraving laser head. With the Laser Dock magnetic docking station, you can significantly ease the task of mounting your…
Designed with affordable engraving in mind, this laser head can be mounted on a wide range of CNC machines and 3D printers in order to add engraving functionality to them. The file can also be downloaded from: https://optlasersgrav.com/…
This is a step file of the Opt Lasers 6 W Engraving Laser Head. This laser head can be mounted on a 3D Printer to transform it into a 3D laser printer engraver. The file can also be downloaded from the following page:…
Der zusammenbau ergibt sich von selbst, alles bis auf das Mittelteil muss doppelt gedruckt werden.
This file contains part C for the LaserDock magnetic docking station, which constitutes the cover for the device. The magnetic docking station device is meant for engraving and cutting laser heads. Once assembled, the resulting accessory…
Holder for xTool Button Switch This one button is for the xTool F1 & F1 Ultra Laser Engraver. The button has a long USB cable, which allows you to move it away from the laser to a more accessible place. The button allows you to start,…
EN: This is a Creality Sermoon S1 laser scan of a Braeburn apple from New Zealand. The apple was scanned with standard settings at a resolution of 0.2 mm using cross, parallel and single lasers. — I would be very happy if you have as much…
I have the Ortur Laser Master 1 with 20W laser module as well as some other 33mm laser modules (500mW, 2.5W, 15W). As the lower power modules give a better resolution because of smaller laser dot I use them with the Ortur as well. They…
Der Anschlag wird mit Doppelseitigem Klebeband fix auf den Tisch geklebt oder mit 4mm Spanplattenschrauben geschraubt. Die Honeycomb oder andere Unterlage wird teilweise darunter geschoben. Somit wird jedes mal beim Einlegen neuer Teile…
Designed with the Multitool 3D printer from Z-Morph in mind, this hook can be used to add an engraving and cutting laser head to your Z-Morph 3D printer. This file is also available at: https://optlasersgrav.com/ Additional information…
Designed in order to connect a Z-Morph to a cutting and engraving laser head, this file creates the Z-Morph 3DP Rear Hook, which is a part of the Z-Morph mount set. It has been devised in particular to connect an engraving and cutting…
The Masterton Fab Lab laser cutter had a 10mm diameter guide laser on it, and it got smashed. In New Zealand for stupid reasons importing lasers is hard. But one way we can get them is as kit parts, and Keyes sell an Arduino-compatible…
This is a MPCNC 525 mount for the JTech 2.8 Watt laser Some new additions in the new version are a block to hold a loc-line hose for air assist, and a post to hold a #6 screw that could be used with a touch Z-probe. I used brand name…
idk he is evil and hard to make
I used this PerGear LaserStorm S10 Leg to modify the machine in my review video: https://youtu.be/2LD58RbamVI Category: 3D Printer Parts
This is a digital 3D printable adjustable Z axis mod for LaserTree K1 lasers, designed to add over 100mm of Z height for engraving taller projects and improving workspace flexibility. 🚀 DIGITAL DOWNLOAD ONLY / no physical item ships. Use…
Ein Lasersymbol zum anbringen an der Maschine , ich drucke es mit PETG Schwarz und beschrifte die erhöhten Bereiche mit weißem Lackstift. Skaliert es bis Ihr die gewünschte größe erreicht habt !Die Beschriftung “ Laser ” habe ich im…
Main Config: 3 Walls, Infill Rectilinear, 0,2 Layer Height, no Supports Auffangsbehälter: 100% (90g PLA) 10% (60g PLA) optionaler Deckel: (STL folgt nach Testdruck) 100% (36g PLA) 10% (13g PLA) Dichtungsring: (STL folgt nach Testdruck)…
Elements used for the Lasersaur project. v14.03 http://www.lasersaur.com/ Laser tube 100W RESI, 80mm diam. These parts are made as replacement for aluminum part and extrusion assemblies who was not precise enough for me. As soon as I…
Ein Lasersymbol zum anbringen an der Maschine , ich drucke es mit PETG Schwarz und beschrifte die erhöhten Bereiche mit weißem Lackstift. Skaliert es bis Ihr die gewünschte größe erreicht habt !Die Beschriftung “ Laser ” habe ich im…
Ich habe es aufrecht stehend mit Baum-Supports gedruckt.
EN: These are two 3D laser scans of a Panasonic ES-LV67 shaver using the Creality Sermoon S1 and Shining 3D Einstar Rockit 3D scanners. The scan on the left (green) is from the Sermoon S1 and the one on the right (orange) is from the…
12-Up Dog Tag Engraving Jig — 6.5mm Mounting Rail (Fiber Laser Ready) | STL + 3MF 🚀 Boost your engraving production with this 12-up dog tag laser jig by Song Dawg Designs —built to help you engrave up to 12 dog tags at once with clean,…
Take your production to the next level with this Hat Clip Engraving Jig , designed for precise and repeatable alignment on both fiber and CO₂ laser machines. ✅ This alignment fixture includes a 6.5mm rail to ensure consistent placement…
Bellow you will find the list of materials and the assembly instructions. Bill of materials Here is the BOM with links: 230gr of Transparent PETG - Geeetech $12 per 1kg spool 5 ⨉ 100mm 2020 Aluminum Profile - $5 per 4pcs 1 ⨉ 300mm 2020…
These are parametric corner and end stops made to attach to slotted beds with continuous threaded section, they will also work with beds that have a few regularly spaced holes or through slots. The parametric CAD models are available…
Take your hat customization to the next level with this 3D printable hat engraving jig, designed for engraving felt and suede hats with precision and stability. This jig includes small cutouts for clamps to secure material and removable…
12-Up Dog Tag Engraving Jig — 6.5mm Mounting Rail (Fiber Laser Ready) | STL + 3MF 🚀 Boost your engraving production with this 12-up dog tag laser jig by Song Dawg Designs —built to help you engrave up to 12 dog tags at once with clean,…
Take your production to the next level with this Hat Clip Engraving Jig , designed for precise and repeatable alignment on both fiber and CO₂ laser machines. ✅ This alignment fixture includes a 6.5mm rail to ensure consistent placement…
Badge for a Ford Laser KF/KH model. This is a reproduction of an original badge.
The height gauge measures 11mm, and we use it to measure the distance from the laser to the material in order to reduce burn marks on Flux Laser Cutters. However, please note that your laser cutter may be a different size. FLUX LASERS…
