271 models
Now out! The HMS Hood that was sunk by the Bismarck! Get your model here: https://www.printables.com/model/776292-hms-hood (Printing and assembly instructions below) The German battleship Bismarck! Named after Otto von Bismarck and the…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Additional Hardware and Assembly Suction cups fit into holes with a bit of pressure and twisting. It takes a bit of elbow grease but they will squeeze in. I bought a generic multipack of suction cup hooks of different sizes for about $5…
Print approx. €3.34–€4.08 excl. taxPreliminary estimate for one variant
I had a flash of inspiration last night! As I'm still learning to design and work my printer, I thought it'd be kinda funny to make tokens based on failed calibration tests, prints, and hardware. Since Monopoly has 8 tokens I decided to…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
Lešij - Slavic forest demon, guardian of the forest (three colours) - 20 cm Wall art, matrix for graphics and frottage
Print approx. €4.57–€5.58 excl. taxPreliminary estimate for one variant
Welcome to my first attempt at a printable kit of the Battleship Fuso in 1:625 and 1:700 scale. This model is based on the Fuso model in the game World of Warships, completely remodeled from the ground up, with many tweaks and adjustments…
The source marked this model as adult content.
This is a pocket-sized, travel game of battleship that fits inside an Altoids tin (ok… technically two Altoids tins). This mini version includes all the pieces you'll need to play including: Both Play grids Hit/Miss Pegs (I would suggest…
I hope you enjoy playing this version of the classic naval battle game as much as I did, both as a child myself, and later as a father with my own kids. It is one of the few board games you can easily play over Zoom, etc. This is a major…
This is a Wendigo / Forest spirit / Leshen (from The Witcher) / Krampus costume set. Now with detachable horns and antlers! It's remixed from other things (see remix sources). ======= SCALE IT PROPERLY ======= UPDATE 2024-09: I have added…
This is another of my Star Gate project. The Arora is 60 cm long and it has retractable third leg so that it can stand on its own without any stand. All fits togeher via pegs and holes. No need for a glue. Check this playlist for the info…
Update 23/7: Added floatplane (Curtiss SC-1). Available under “Download STL” files. Update 25/7: Updated Assembly Guide for AA gun placement. Update 29/7: Revised Aviation model for better printability, .3mf updated to include Sprueless…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Printing assembly instructions below! The HMS Hood, the first of the Admiral-class battlecruisers built in 1916 for the Emergency War Programme. Since then it has been a feared battleship and a proud jewel in the Royal Navy. Sunk by the…
I've been trying to make a model of Bismarck for years at this point, and I've never really gotten it quite right. That is, until now, because I finally sat down and actually put effort into it. The hull was challenging, to say the least,…
IJN Japanese Battleship Yamato from World of Warships. Best printed at a length of 180-200mm Infill: 8 Supports: No Walls: 2 This is a stylized model by Subhunter59 and is for free use.
A few years ago I wanted to have a Scharnhorst - so I made one… I dont know anymore why its scaled so strange but the hull needs to be printed in scale 287 if you want to have a 1:350 model. The smaller parts need to be scaled smaller but…
Print Settings I printed a few iterations, at .02 mm layer height. The one pictured is not the final model and was printed before I decided to bulk up and smooth out the hanger portion. Consider Your Filament Please be careful with any 3D…
German Battleship Bismarck from World of Warships. Best printed at a length of 180-200mm Infill: 8 Supports: No Walls: 2 This is a stylized model by Subhunter59 and is for free use.
Flesh Golem! Print with a ton of supports and a raft. Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here:…
It's been a while since I made a model for BFG, so here's another battleship. This is a Retribution-class battleship, however this time I designed it from scratch in Fusion 360. It is my own design but is very much influenced by the…
US Super Battleship A Fix of https://sketchfab.com/3d-models/us-super-battleship-rhodeisland-c32ca1eb79e043adb8889e5e8cfb1d77 Removed all the wires. Solidified, Added .2 offset to entire model.
Update 26 March 2023: Version 1.2 is now live, featuring numerous fixes for minor oversights. Details in the changelog file. Approximate dimensions of this model at 100% scale: 25.5"/65 cm length, 4"/10 cm beam, 10"/25.5 cm height. All…
Before you print! This is a special model, that is ment to be shot at, with an airsoft gun. It has many watertight compartments, so it can take multiple hits (depends on how strong gun you have). Because its ment to be destroyed, I did…
This battlecarrier Bismarck version is fully printable and I actually printed it, but I didnt finish the paintjob so I decided to upload just the render. For Scale 1:350 please use the cura scale 0,285% because the model is in 1:1 scale.…
Tokens for playing naval battles; as per MB rules of 1990 there are 5 ships, from the largest to the smallest they are: Carrier (5), Battleship (4), Cruiser (3), Submarine (3) and Destroyer (2). You can find all my models here , thank you…
With the current Magic Story I though this was appropriate. If you want to help me keep making free models or to tell me what I should make next please check out my [Patreon](https://www.patreon.com/stormcrow13)
Special thanks to @schtiewie for sharing original model with us. UPDATE: 29.09.2025 - I have added bottom jaw in one piece together with splited parts and connectors. You will also find .3mf file with all plates of bottom jaw included.…
Nemesis Retaliation board game insert/organizer using the core box and the sangrevore expansion box. The sangrevore box holds all the enemy miniatures. The core box holds everything else. The insert supports the following: core box…
Im uploading my reconstruction of the french battleship Gascogne. I used the World of Warships model as a visual reference, but I didnt copy any ingame content. The model is scaled 1:1. For 1:200 scale use the 0.5% slicer setting and for…
this a battleship use supports or it will turn out bad
If you're feeling brave enough, multicolor option is made available. Use presettings for desirable outcome. 15% gyroid infill 0.1mm-0.2mm layer height Supports required
Nosferatu Skull with Deteriorating Flesh THIS IS KIND OF A MESS
A storage solution to bring dice throne to the table quicker. The covers use magnets to hold the covers. To remove the covers I used the dice throne trophy ( https://www.thingiverse.com/thing:4121167 ) and added a magnet to it to act as a…
This Rok is from the Flesh and Blood trading card game. After that card was released I was inspired to make it exist physically in the world! I hope you'll get as much enjoyment out of it as I have. It can hold a little over 100 single…
Split up specific stls for printing with different colors in case you have an MMU or equivalent. Gray bits Black bits Copper bits Blue window bits Yellow engine bits Mostly followed Martin's CAD on Youtube for colors, but it's not like…
Small enough to fit in an Altoids tin! The pins are he made out of 1.75mm Filament cut to 10 mm Long. Don't have an Altoids tin? Print this one!
This cap was modeled to replace a "Fleshlight Flight" cap that broke and to be easier to screw on and off than the original smooth-sided cap. I read somewhere the "Fleshlight Go" series cases use the same sized threads as the "Flight"…
I remix this thing to create a flesh tunnel and made a hole with a bulge in it. The wall of the 20 mm and the 10 mm tunnel is at least 1mm thick (in the middle a bit more). I have not tried to print the tunnels with a fdm printer yet…
Stand and fan assembly for drying your fleshlight. Requires a 12vdc fan, barrel jack, and power supply. I used a random 12vdc power supply and jack I had lying around. Got the fan off Amazon. Snipped the wires and soldered to the jack.…
An adaptor for the Fleshlight shower mount that will fit the Fleshlight Flight, Pilot, and Go.
This make includes 5 new ships models for the hi game battleship! (see image attached for compatibility check) Includes 3 Spot Yatch 4 Spot L-Shaped Aircraft Carrier 5 Spot Plus-Shaped Shipthing 4 Spot 2x2 Dock/Raft 3 Long but Diagonally…
A model of a Flesh Golem. Print it and add it to your D&D collection. I will be sculpting my way through the D&D Monster manual so feel free to check out my sculpts here. So this is the first of many (free) sculpts. Donate a coffee to me…
Print the turret facing upwards, vertically. Use adaptive infill to make the barrels and blast bags portions 100% infill. You will need a lot of support for the turret, so use a support brim. No support is needed for the storage barbette.…
The second image is a gallery of the impressions you get with individual rollers.
The source marked this model as adult content.
Parametric flesh tunnel (earring). Plastic is a great alternative to metal for colder climates that may effect the blood flow in your ear lobe. Do your research before choosing a material for printing. if you would like a specific size…
Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Very detailed Calakulumn (Or Karakulum) class Great battleship from space battleship yamato. While it is somewhat recommended for Resin printers with this, I did redesign this version of the model to be compatible with filament printers,…
This is my redesign of the edgun leshiy magazine holder for use with M-LOK rails. I have a single mag holder version up here as well. This version has some subtle improvements over the original design. It is intended to be printed in PLA+…
This is a remix of my own Travel Battleship game. After having printed two sets of games, I saw that there are a lot of parts (2 x 64 markers). Then I realised that it is not necessary to track your opponent's shots, with exception when…
Battleships For Micro Armor Including Patrol Boat, Submarine, Battleship, Cruiser, Battleship
ARTICULATED WHALESHARK A charming 3D printed whale shark with smooth articulation
This is my version of a Star Wars Battleship game. This version is only with ships of the Galactic Empire. A version with Rebel ships is in work. Assembly: Start with “Box 1” and put the “Box 3” and “Box 4” in Than you can add the ships…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
A prank I designed for the BATTLESHIP board game, can be used as a replacement part if you like causing chaos at the dining room table. Printed on a ELEGOO Saturn 2 resin printer with 8k Grey ELEGOO resin, using Lychee slicer and UVTools.…
A commission by a very cool dude! He has allowed me to upload and share the model of his Evil Pumpkin Leshy character with you all, so please enjoy! This model has been designed with easy printing in mind, few supports should be needed…
This is my version of a portable “Battleship” Game. Update: This is the first version. It allows you to track also your opponents shots. Therefor you need a lot of game pieces. My remix reduces the number of pieces. All my travel games…
This is the battleship from Planetary Annihilation Titans, ripped straight from the game files. Comment if you have a request or post it on my group page. I will upload it within 2 days max. Category: Video Games
I created a Stealth Battleship Catamaran Wolvie Class - SBCWC for everone, who like models of Battleships :-) I wanted modeled my own (fictional) Stealth Battleship Catamaran in my Wolvie Class, in short SBCWC. I took and remodeled 5…
1/16 display model of the main 15 ton anchor of Imperial Japanese Navy Battleship Yamato. Glue required for assembly. The bottom part, anchors and the rod have pins to help allignment. Build list: Anchor model: anchor: 2 pieces 2 pieces…
55 is good for double sleeved or paper proxied 75 card decks 60 is good for single-sleeved 100-card decks So far it prints best in PLA, the single wall is very warpy (but still usable) in PETG.
I made the test prints in CF-ABS, so the tension might be a little different for PLA. You will need to print with supports as the underside is not flat. You will also need a pair of M-Lok screws and nuts. I also have a 2 magazine holder…
Tokens and dice for the card game Flesh and Blood
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://mz4250.com/ Patrons have access to all my files in one place, a request…
A fun little sign to hang over the CNC. UPDATED: v2 with flattened faces so it prints better.
this is the 1/1700 scale drake class from gundam seed.
This is a simple battleship (self-designated Endeavor-class), based loosely on the pre-dreadnought battleship Mikasa and other battleships of that era ( https://en.wikipedia.org/wiki/Pre-dreadnought_battleship ). This model is relatively…
The battleship bb 1 uss Indiana I saw printsnails simple large battleship and wanted to make my own so i saw the model ship (uss Indiana) and made a simple 3d model
A Fiendish Flesh Golem. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Tired of playing Battleship with the same 5 ships? Hopefully this can add a bit of variety! This new set includes: A LNG tanker ship (1x4) A floating oil rig (2x2, something not seen in the original game) A small rigid ship (1x1, also not…
A comical, yet serious sign that is sure to fit in with any 3d printing setup. A 3mf file with color changes is provided, and NO MMU IS REQUIRED! Wanna use it for a different machine? (cnc, router, mill, lathe, etc…) Make your own remix…
The design of this model is intended to help highlight deficiencies in your calibrated and tuned settings (e-steps, flow ratio, pressure advance, z-offset, etc.), while also using a minimal amount of filament (~5g) and taking a relatively…
This is a simple battleship (self-designated Endurance-class) with simple slip-fit turrets. Unlike the “Simple Large Battleship” design, the hull is printed in one piece and about 235mm long, allowing it to fit on most print beds (it fits…
Here's my proxy model for the Frosthaven Summons, the Flesh Bomb! This is a horrible mass of flesh and limbs. Enjoy! As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although…
Hello there! I remixed a popular and at the same time quite necessary model for every printer into a warship. Everything is printable without supports, so you can test your printer with this model too. I added two weapons on the side and…
ornaments that look like the Flesh Prison and Panopticon from ultrakill this is my first model so idk if it fully works
This Benchy is a battleship Benchy – a mini warship with cannons at the front and on the sides. It's a perfect test print!😀👍 Happy print!😁🎉
My fanwork to the dungeon and dragons Flesh Golem. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Prusa MMU2s F.I.N.D.A. (filament detection) Troubleshooting aid The best way to quickly troubleshoot what is going on in a machine is to have all sorts of indicators at different stages of the process. After adding the wonderful…
The source marked this model as adult content.
This is a Battleship for Memoir 44 that has printable counters.
Everyone knows about battleships, and they were the great metal beasts of their time. I made this to give you something fun to remind you of them. Printing Print the body slightly bigger so the turrets fit snug, since I didn't add the…
![IJN Battleship Yamato [大和] anchor 1/16 display model](https://media.printables.com/media/prints/877271/images/6728357_8bbca9b2-6460-4eb1-bf68-f68c2195cc52_af7ed5c0-35f1-4ffb-8483-0bda03b68853/large_display_ee06bc18-39ae-4b74-8f2c-d0e952938ab7_877271.png)
