31 models
My garage door keypad, an 877LM, can close the garage door just by pressing the enter button, no code needed. When I walk the dog, or take a car not parked in the garage, I want to easily close the door on the way out, and was annoyed…
0.2 mm resolution no supports infill and wall settings should not matter, printed at 15% infill and 3 walls/tops/bottoms.
LiftMaster 78LM Multi Function Garage Door Control Panel Door open/close button. This is just the cover for the open close door button, not the entire housing. Printed on Overture transparent PETG.
Simple modification of a different model. I cut the top of the original off to make it a remote mount. It holds the opener in place firmly, could be mounting in any orientation I think. *Edit 20230402* You may want to add supports for the…
Pad to adapt my Liftmaster 2.5 Ton Low Profile Jack to the frame rails on my Nissan 350z https://www.amazon.com/dp/B07KPN94VM Print Settings Rafts: No Supports: Yes **Infill:** 100 Filament: Overture PETG Red Category: Tools
This is a new enclosure for the LiftMaster 3-button garage door opener. It is minimal in size. The original LiftMaster opener is bulky with a clip on it. Further to that, its plastic eventually degrades and the buttons fall off. This is a…
Liftmaster Remote 893LM Holder Share your Make:)
This wall plate allows you to neatly place two Chamberlain (Or LiftMaster, or Sears since they are all made by the Chamberlain group) wall control panels side by side. It has channels on the back side to hide the wires. You can use a…
So, we have a 2 car garage and unfortunately, my car doesn't use the “big ass” button on the liftmaster remote. The liftmaster remote has a pretty unique side profile, but I made a sleeve that fits it and only exposes my button so that I…
Visor clip that inserts into a LiftMaster garage remote. I recommend a brim if you print it on its side since the contact area of the thin part is so minimal. Link to original visor clip:…
MyQ decided to change their API to block people from controlling their garage and gate openers with any 3rd party apps. This broke my ability to open my gate through HomeKit or anything other than the MyQ app which tends to not work very…
This remix shortens the original Garage Door Sensor Sun Shield by 20mm to better suit the Chamberlain Group LiftMaster 041-0136 safety sensors. The adjustment ensures a cleaner fit without interfering with alignment or mounting, while…
Fits LiftMaster Security+ 2.0 Uses 10mm disc magnets, glued in place. I used duct tape to hold in the AirTag
Simple mount to secure the Liftmaster 890 remote to a flat surface. I use it to secure it to the interior of my motorcycle tank bag. Version 2 I made the side clips more aggressive and the key chain notch latching. Please Review and Share…
Sprocket cover for a Liftmaster of Chamberlain garage door opener. Part number 03100380 This cover is to protect the sprocket the runs the chain on the top of the garage door opener. Print Settings Printer Brand: Creality Printer: Ender 3…
This is a replacement shell for the LiftMaster TX2/4EV remote, designed to work with the original rubber buttons and screw. Two versions are available: a solid model and one with a small cutout for viewing the LED indicator. For the…
My garage door opener was activating on accident. This is a simple cover for the remote that prevents activation of the large button. It's held in place by friction and the notch on the rear of the remote helps to slide it out. Category:…
Replacement for the buttons/middle plastic piece of an 895max garage door remote. It isn't perfect but it worked for me. I printed it vertically with the buttons up. It doesn't matter much cause it'll use lots of support either way. The…
Overview: This is a sun shade I designed for Chamberlain/Craftsman/Liftmaster compatible safety sensors. It is tested with the Chamberlain Model 820CB, but should work with any similar Chamberlain/Craftsman/Liftmaster sensor. Why Do I…
A Chamberlain / LiftMaster Mini Universal Garage Door Remote Holder, to mount it onto the center console. It is designed to be compatible with 3M Command Outdoor strip for secure mount and easy removal. It is designed to fit Kia Niro EV…
A simple holder for the LiftMaster TX2/4EV remote. that I made with the intention to mount with doublesided taped in my car but still being able to change the remote batteries. I printed with the settings: 0.2mm layers 3 wall loops, 3…
This model uses the control board from a generic Liftmaster/Chamberlain/Craftsman garage door opener remote ( generic link ). They're a dime-a-dozen on Amazon and chances are they work with your garage door if you're in North America.…
This is a slide-in housing for the LiftMaster 373LM garage door remote. This mount is designed to be adhered to a vehicle surface so that you can use a strong, heat resistant double-sided tape. Before this I was using adhesive…
Needed a way to mount the garage opener without making holes to the wall. Decided to make a plate that the garage opener can be secured to; then the plate can be taped to the wall. Used a tape measure to get the dimension, therefore I did…
Printed with OcraSlicer, Flat. 4 walls .2 layer height and tree supports.
Made this cover to keep the one button we use from activating in my pocket.
Replacement light diffuser for liftmaster early 2000's model(s). Posting two versions. 1) Thickness compatible with original 2) Thin wall.. 1.7mm so that will be three layers. The corners have more material around the mounts points since…
Tesla does not have HomeLink. In my opinion, clipping a garage door opener onto the visor ruins the interior's clean and minimalist aesthetic. Instead, I made this part to hold a Liftmaster 374UT universal remote. The part fits neatly…
The spacers in my opener went out, so I fixed it, for next to nothing, 3 hours later. OEM kit is about $10 with 5-7 days shipping. To get them close to the OEM "durometer" or function of the original spacers (soft start on the plastic…
I created this model to prevent someone from unlatching the deadbolt from the outside. The LiftMaster 841LM Deadbolt can be installed on the left or right of your garage door track, but this placement makes the manual unlatch on the…
This is a slide-in housing for the LiftMaster 373LM garage door remote. This mount is designed to be adhered to a vehicle surface so that you can use a strong, heat resistant double-sided tape. Before this I was using adhesive…
