Counting matching models…
This is a connector bracket for Ikea’s Lagkapten and Linnmon desk system. It allows you to connect two of the desks together side by side using the existing pre-drilled holes. The bracket is compatible with both Adils and Olov legs and…
My take on the Linnorms uses trademarks and/or copyrights owned by Paizo Inc., used under Paizo's Community Use Policy (paizo.com/communityuse). I am expressly prohibited from charging you to use or access this content. My take on the…
I have an IKEA desk made of LINNMON and LAGKAPTEN tops and ADILS legs. It's great, because it was cheap. It's also terrible, because it was cheap. The first problem is that the $5 ADILS legs are not uniformly constructed. Specifically,…
My takes on the Void Dragon and Water Linnorm uses trademarks and/or copyrights owned by Paizo Inc., used under Paizo's Community Use Policy ( paizo.com/communityuse). I am expressly prohibited from charging you to use or access this…
Printed in PLA, nothing crazy about it
This connector is a really nice design. I wanted to use the original IKEA screws, so I shortened it from 10mm to 6mm and inset the screw holes to 3mm. If you're planning to use this without legs, the thicker original is probably better.…
This leg mount is designed to allow you to use 1.5 inch PVC pipe as legs for an IKEA Linnmon tabletop. I have also made matching feet for the PVC pipe that can be found here . Buy me a coffee :) - AureusKhan.com Random text for search…
Do you own IKEA but wish you had a better way of holding your headphones? Well have I got the solution for you. Introducing: this model. Printing Instructions: If I'm being honest, I probably could've designed this to be easier to print.…
we bought the mala paper rolls from ikea, but the kids did never use this. we didn't buy the original paper holder, because it was a little clunky and not fine finished. So I made a 3d printer holder for the kids, I wanted it as small as…
I modified the print to be able to attach it to my computer desk which is the Linnmon from Ikea (34mm). Also added two more loops for more cables :D ** Update 08/06/2020 v2 Added a new version with a tighter fitting (33.5mm) for the table.
I made two models, one with a small space for cables and one without space (directly connected). I hope you enjoy the model.
IKEA Linnmon is a nice tabeltop that fits the Prusa XL quite well. But it is not so sturdy so the vibrations from the printer makes the table wobble a bit. I designed these brackets to stabilise the legs and they work pretty well. I…
This is a connector bracket for Ikea’s Lagkapten and Linnmon desk system. It allows you to connect two of the desks together side by side using the existing pre-drilled holes. I used the screws that Ikea provides. Work's fine!
I created a mount to attach my table top (Ikea LINNMON) to my Ikea Alex drawer units. One big thing was to make it easy removable. The design contains 2 models which you will have to mirror ones in your slicing tool. In the end you just…
Hi 3D printing friends! These are table support brackets that I used to attach my Ikea table (Linnmon, Item 16353)/legs (Adils, Item 22724) to the wall to limit my printer from shaking the table. The Bambu Lab X1 Carbon moves quick and…
I designed this to make the monitor and laptop power adaptor and whole cable management much cleaner on my IKEA Linnmon secretary. Inside the Power Adaptor guide, it fits my Samsung monitor and LeNovo laptop power adapter. Everything is…
Žáci si vytisknou rostlinnou buňku se zabudovanými NFC tagy, na které nahrají popisky jejích částí. Projekt mohou na základě zkušeností rozšířit o vytvoření dalších interaktivních modelů.
Monitor stand legs fitting for an IKEA Linnmon table so you can put a monitor stand onto it. For those that like things in ultrawide. Requires an 18mm thick wooden board that is as wide as the table and some M4 Spax screws.
Simple Cable Clip for the cheapest Ikea Table Category: Household
Easy to print heaset / headphone rest with original IKEA screws on the table. You don't need any additional parts. Print instructions 5% infill is enough Changelog: 22.03.2022: One part design (no more cones needed) add right version
A printable locking bracket for joining together IKEA Linnmon/Adils based desks together so they don't move apart when working on them.
I wanted to have an angled table for my music equipment, so I've created these leg adapters. They are straight forward to print, number of walls is recommended to set to at least 5 better more for heavy load, infill can be rather low,…
Connector for your Kallax desk and shelf. Holes for M8 thin nuts (DIN 439) paired with M8 x 10 mm (DIN 933) bolts. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: No Resolution: 200 Infill: 40 Filament: Prusament…
CURRENTLY IN PROGRESS: This is a mod that I made for the Stealth Burner, This is meant for any person that is using the Linneo Umbilical Molex Cable Kit. It utilizes the hardware that is in the Linneo Kit, This also uses the pieces of the…
Use this model with a USB 2.0 extension cable to put your Zigbee adapter in a position for better signal strength. The desk mount has pretty tight tolerances, but a small amount of blu-tack can help to fully secure. Only tested with the…
Created for the 35mm desk height LINNMON / ADILS IKEA desk. Headphone Band support is 35mm There is about a 0.5mm gap to allow blu or white tac to hold firmly in place to avoid scratching.
Just a little make for a clip to hold 2 linnmon desks together with adils legs. I was getting quite tired of having to realign them every time i sat down. Excuse the quality of the print, did it in "rough n ready" mode for speed. No…
Ten dekoracyjny wzór wektorowy przedstawia misternie zaprojektowany, symetryczny motyw roślinny o klasycznym charakterze. Powstał przy użyciu ChatGPT, który najpierw wygenerował ornament w formie pliku graficznego: Następnie został…
Custom Foot Cap for the Ikea Linnmon/Adils Table. Just take an M8 Hexscrew of your desired Lenght, and you're good to go. -I took an M8x45mm Screw -My desired Tabletop height was 76cm If you want your Table to be higher than 80cm you…
Bracket for joining together ikea tables. DXF is easily converted to STL of your desired thickness. Corner vers untested
I had an old Ikea Expedit cube storage , which is thicker than the Kallax cube storage, but still wanetd to connect a new Linnmon desk to it. I looked around and couldn't find one, so I made my own. It needs 8x 3mm screws to secure it.…
NOTE: This model has been replaced and upgraded a lot! New model is located here: https://www.printables.com/model/1188461-ikea-linnmon-desk-wall-bracket-v2 Best printed from PETG, but PLA works as well. Thicker layers work better for…
I needed this hook for my 3D-Printer USB and my USB risercable, because they always felt behind the table. So I remixed the normal 34mm hook. Category: Office
This is a holder for the Anker PowerCore 5000 battery. It mounts on the left side of Roger Linn's Linnstrument MIDI keyboard, and connects via a USB Type A cable to provide power. It can be connected to the Linnstrument's USB Type B port,…
This is a holder for the Anker PowerCore+ mini that attaches securely to the side of LinnStrument using the strap holders. It allows LinnStrument to be battery powered, and with a device like CME WIDI, makes it possible for LinnStrument…
Dekoracyjny wzór wektorowy przedstawiający elegancką kompozycję grzybów splecionych z wijącymi się pnączami i stylizowanymi liśćmi. Projekt łączy naturalne elementy z ornamentalną symetrią, idealnie nadając się do wycinania laserowego,…
An improvement over my original design, these mounts fit perfectly on linnmon tabletops. I use these to improve rigidity for my printers, and to make my computer desk rock solid.
I want to know what it would feel like if LinnStrument rows had a speedbump shape. This would let you feel the rows. The
I loved the standing desk mod, but I wanted to add a bracket so that I could have my 3d printer below my desk. This gives me clearance for my CR-10 .3mm layers, 3 walls, and 40 infill with 2 gradual steps. Print Settings Printer Brand:…
I had to shorten the original model to fit my desk where there is a aluminium led channel. going across the edge. This is my first ever CAD project and I could not figure out how to remove the screw hole bevel. It doesn't affect it…
I created this in OpenSCAD to replace a broken tonearm clip on my Linn Basik plus tonearm that is fitted on my Linn Axis turntable. The original clip becomes brittle after many years and can snap across the arc of the clip. I glued the…
Slip on bracket to add 10cm to an Ikea desk. Held in place either with double sided tape or just the weight of objects on top it. Prints without support in PLA or PETG. I use it to support a sheet of acrylic and extend desk into wall…
Front bar arms for Linnpower Evo MK-1. This is just the bottom bracket and arm, rest of the accessories can be found here: https://www.printables.com/model/1179407-onsra-velar-front-light-bar-mount…
Carl Linnaeus Bust is a historical warrior or soldier figurine bust 3d model for collectors, wargaming, and tabletop display. You can 3d print this likeness-style bust for a desk or shelf centerpiece, a diorama, or as part of an…
NOTE: This model has been replaced and upgraded a lot! New model is located here: https://www.printables.com/model/1188461-ikea-linnmon-desk-wall-bracket-v2 Best printed from PETG, but PLA works as well. Thicker layers work better for…
Modular trays for Ikea Linnmon cable organizer. There are brackets and trays, and they can be joined together as needed. The connection is tight so test prints to adjust setting might be necesary.
Used for attaching led profiles (8mm) on an IKEA LINNMON desk (34mm thick). Category: DIY
Have an Ikea Linnmon table? Have a pair of large headphones? Now you can hang your headphones from your table. Expected table thickness is between 32 to 34 mm, so it should clamp down securely without damaging the table surface. MK 2…
This is a remix of MandicReally's "Voron Y Endstop Relocation w/ PG7 Cable Gland Mount". The purpose of this remix is to allow it to be used with the Linneo cable harness, which uses a square flange mount with 4x M2x10 FHCS screws (with…
What is this These are little wire management clips that i made for my desk. they will work for Linnom and possibly also Gerton Desks from the Table Bar system. How do they work They clip to the back of the desk and let you place wires…
Altura Recomendada 150mm Concepto de diseño Este modelo 3D representa una figura estilizada y moderna, inspirada en un personaje moderno y amigable. La pose dinámica y la vestimenta reflejan un sentido de moda y energía juvenil. Uso Ideal…
Another tool for lining up clip on bars on a motorcycle. A little less technical than Bar linny uppy, but should work all the same to make sure the clip ons are in the same position. uses Gopro hardware to hold the whole thing together.
This is designed to hold my Seagate 1TB external hard drives. They were cluttering up my desk, and I wanted to clear up some space. The hole in the bottom should accommodate any Micro USB 3.0 cable that you want to use. It might print a…
Make your own folding table - IKEA LINNMON suitable holder Print on side with supports Sekchup File included Print Settings Rafts: No Supports: Yes Category: Kitchen & Dining
In this present work, an investigation is carried out on the existing products in the market that reduce environmental humidity, looking for the option that has the greatest economic viability and based on simplicity. Different materials…
Combination desk mounted headphone hanger and controller stand for your IKEA desk. This mount has a threaded screw to allow you to fit it perfectly to your desk. Depending on your tolerances, some sanding of the screw may be necessary.…
I changed the part that holds to the tabletop to have a slight angle to it to provide a bit more friction in clamping to the tabletop. Also I changed the profile of the clip to be flat on the back so the cable loop does not extend past…
Kreme's original model was brilliant, but I wanted to tailor it to my needs of fitting more snugly around my desk, as well as fitting on the bed of my printer so I didn't have to split parts up. All parts printed and tested, confirmed to…
This Linn Tonearm Alignment Tool is designed to the exact manufacturer specifications of the original metal Kinky Arm Alignment Tool. Save money, shipping fees, and time with this version of the essential tool. It’s lightweight, easy to…
