Counting matching models…
Lionel Messi Bas Relief. Testing out Flux + TiledZoeDepth. Flux is nice because there is a lot less need for multiple batches to achieve desired results while using Forge (Stable Diffusion) As long as your description is tight you are…
Print approx. €6.01–€7.35 excl. taxPreliminary estimate for one variant
Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
This trestle system allows for inclines and elevated sections of Fastrack. I have designed sections in 5mm (0.2in) increments. Combining this with 10inch sections of Fastrack will result in a 2% grade. It recommended to place a trestle at…
This is a replacement track for the Lionel Ready-to-Play straight train track based on the 2017 Polar Express Lionel Train Set Parts. The track has tack holes to nail it down. Curved Track Leave a comment if there is a configuration you…
Plastic Stencil for Wall DIY, Scrapbooking, Embossing and Card Making - Art Supplies Stencil Lionel Messi Template . It is easy to use a pen and paper, or a paint roller, to apply a picture to a T-shirt, wall or anything else. The size of…
Messi eyeglass holder To print the Head_Holder you will have to scale it (a little bit smaller) so it fits with your head size Nozzle: 0.4-0.8mm Layer: 0.3-0.4 (Recommended) supports needed Scale it as you like :)
I grew up with my grandpa showing me his Lionel train sets, which he eventually gifted to me. I decided to design a new train car for my O-Gauge train set. This is a flatbed-style train car, with the wheel cage and wheels in black TPU,…
Lionel Messi Add your own hair and beard.
Lionel Messi Round Plaque Another Version can be found here: Lionel Messi Bas-Relief Plaque by Peter Farell | Printables Store
3D model for 3D printing :) I print model on my old MK3S+ with PLA material, noozle 0.4mm, slicer options on 0.15mm Quality Good luck with print :)
This is a railroad crossing created for the Lionel o-scale Fastrack system. Use superglue to glue the parts onto the track. Printing Instructions (Standard): I recommend PLA with 0.25mm layer height, <5% infill, 2 walls, and organic…
This is a replacement track for the Lionel Ready-to-Play curved train track based on the 2017 Polar Express Lionel Train Set Parts. More track configurations coming soon. Leave a comment if there is a configuration you might like to see…
Tired of your trains running off the end of your track? Install these bumpers today. These bumpers are compatible with Lionel O scale Fastrack.
In the 1960's Lionel sold a train set with a car that fired a missile. I have this car but it was missing the missile, so I designed one from pictures. Fits well, flies ok, and seems strong enough to hold up. The upper wings require…
Printed with the bumper face on the print bed and with supports.
This is a Lionel O-Scale 10in Fastrack straight section reference that I use for making track accessories. I have also included the sketch dimensions I used if you're curious. Find more of my model train prints in this collection , many…
Lionel Messi bust showcasing the inner love and passion for the game. Printed in PLA on Neptune 4 pro. 20% infill with supports. recommend printing pieces induvial, not as a whole model. model split to allow color changes. A work in…
I picked up my calipers and put this together. It's specifically for the Lionel Trains Fasttrack system of tracks. It's meant to be at a spacing of every seam, so wherever the tracks connect, the seam should be centered to the holder.…
Ever want to deliver a beer with your O scale train? Now you can. This mount snaps on to a Lionel O-scale flat car, such as the pictured Pennsylvania 473897, using the stake holes. It will safely carry a standard 12 oz aluminum can. All…
This is a custom railroad crossing train track compatible with the Lionel Ready-to-Play Sets. The railroad crossing train track is based on the 2017 Polar Express Lionel Train Set Parts. A complete set for the railroad crossing setup…
This is a remix of Brandon's awesome Lionel Polar Express straight track. Last year for Christmas I printed a heap of track to make my train travel a longer path. This year I wanted something different. So I took the straight track,…
Lionel Messi In Knights Helmet with Krampus Horns Tree Decoration. Few of my models stuck together with a torus added. The very natural byproduct of design confluences and the Holdiay Season. LMAinhelmetornament.stl has the hanger.
This is a quickly thrown together printable replacement for O27 fiber pins. Fiber pins are used to insulate and/or isolate O27 tubular track sections. While my pin design is reasonably close to the original Lionel specifications, I…
Knobs for Lionel power controler My favoite source of Model train things https://railgoose.com/ Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Filament: MatterHackers PLA…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Celebrate one of football's greatest legends with this…
This is a custom railroad bumper train track compatible with the Lionel Ready-to-Play Sets. The railroad bumper train track is based on the 2017 Polar Express Lionel Train Set Parts. A complete set for the railroad bumper setup contains…
Modification of the base for Model Railroad Boxcar . Recess and boss added for mounting Lionel trucks. Boss to position the height of a Postwar truck to clear the front of the boxcar. Compared against lionel postwar boxcar, the bottom of…
This is a custom criss-cross train track compatible with the Lionel Ready-to-Play Sets. The criss-cross train track is based on the 2017 Polar Express Lionel Train Set Parts. The track has tack holes to nail it down. A complete set for…
Two sets of replacement rivets for a Lionel 1121 O27 Turnout. First set is a little long with the intent being one could melt the rivet closed. Second set is a near perfect fit, and can be secured by gluing the 3 printed end caps.
We have a Lionel Santa Fe Special from the 1990's that we like to put out under the tree at Christmas time, and our five year old was disappointed that the trailer would not sit on the flatcar because the hitch mount was broken. I…
In the 1960's Lionel sold a train set with a car that carried two Mercury space capsule. I have this car but it was missing the capsules, so I printed a couple. The model was actually from NASA at "…
This is a tray-mount case for 60% keyboards based on the Commodore 64. I call it the Lionel because it's a fraction of the size of a full Commodore 64. It is a remix of two models: Commodore 64 model…
This is a quickly thrown together rough model of a Lionel Canister 6112. The model isn't quite accurate to the original canister, but it is close enough to pass from a distance, and is better than running nothing in the car. I printed…
Here he comes, Lionel Massive running down the field knocking down anyone in his path.
This gear replaces the central drive gear in the powered truck of the Lionel Chesapeake & Ohio No. 624 Switcher. I purchased this locomotive as “for parts or repair” from an auction site, and it needed considerable work. I wanted to see…
Messi bust to be printed in one piece. Below are the printing parameters. Thanks for stopping by :) No comercial use. Personal use ONLY Link to Patreon :) patreon.com/Artoys3dPrint Busto de Messi a imprimir en una sola pieza. Abajo los…
Golden Football Signatures Collection ⚽✨ -Lionel Messi PATREON:FOR COMMERCIAL USE ONLY!(Link in BIo) Celebrate the legends of football with this exclusive Golden Signatures Collection. Each design features a detailed portrait of a…
I needed a whole lot more track than i could find to wrap the Hogwarts Express around my whole living room, and now you can too! Various lengths, but the standard length fits on a Prusa Mini. The seven tie length fits on a Mini…
Replacement button for a Lionel transformer. Print in Green
I recommend printing this at 0.2mm with 100% infill, using PETG or another strong and heat resistant material. You will have to remove the brush holders/springs from the old assembly and attach them to this new one in order to use it.…
3D Print this beautiful model of Lionel Messi! Using a low amount of filament as this is completely flat, this piece shows incredible detail! Happy printing!
This insert allows you to turn a straight piece of Fastrack into an uncoupling section. It does require a fair amount of modification to the original piece of track and a few bits of wire, but the total cost should be much less than the…
This is a replacement wheel bearing for the coal car in the O-scale Lionel Polar Express train set. It might work for some other cars as well, but it is definitely not universal. This slides into the truck from the bottom and snaps in…
This is designed to work with the Lionel Ready To Play ( RTP ) trains powered by 6 C-cell batteries. Because the nominal voltage of 6 serial batteries is 9v, which reduces to 6v when discharged. However, we can improve performance,…
This is a custom 50mm straight train track compatible with the Lionel Ready-to-Play Sets. The track is based on the 2017 Polar Express Lionel Train Set Parts. The track has a tack hole to nail it down. (Note: This was designed at the…
This is a custom 30mm straight train track compatible with the Lionel Ready-to-Play Sets. The track is based on the 2017 Polar Express Lionel Train Set Parts. The track has a tack hole to nail it down. (Note: This was designed at the…
Replacement handrail stanchion assembly for Lionel Trains MPC-era GP-20 locomotive Print Settings Printer: Sindoh 3Dwox Rafts: Yes Supports: Yes Resolution: 0.2 layer height Infill: N/A Notes: This .STL is set to FINE quality. Because…
This is a custom 45mm straight train track compatible with the Lionel Ready-to-Play Sets. The track is based on the 2017 Polar Express Lionel Train Set Parts. The track has a tack hole to nail it down. (Note: This was designed at the…
Minimal, functional cup holder for Lionelo strollers. Redesigned for reliable fit and easy printing. Dimensions: 85 mm diameter, 125 mm height.
This is a rough base plate for a Lionel 1121 O27 turnout. This is intended to replace a missing base plate, or it can be scaled down in the z-axis to serve as a replacement insulator for use in between the turnout internals and an…
Signed Shirts by UrbanAltCreations97 -MESSI PATREON:FOR COMMERCIAL USE ONLY!(Link in BIo) Celebrate your favorite football players with this professionally designed signed shirt display This 3D printable model is designed to recreate the…
Chibi Lionel Messi Football Legend, a collectible figure modelled for FDM printing and supplied ready to slice. The mesh comes in two files: an STL, ready for any slicer, and an OBJ that keeps the colour of each vertex, for whoever wants…
This model was designed to fit with a Lionel Gondola Car #6462. The LED sign is attached to the sign holder with double sided tape, which comes with the sign. Wires are routed through the sign holder through provided holes, with the…
Supporto poggiapiedi per passeggino Lionello. Ho disegnato e progettato questo supporto per il passeggino Lionello per mia figlia affetta da malattia genetica rara. Aiuta a mantenere i piedi in posizione corretta. Sono presenti 4 asole…
Features: Iconic Design: Argentina's light blue and white stripes featuring "MESSI 10". Back Cover Included: Designed with a cable pass-through hole for easy LED strip installation. Light Distribution: Thin front profile optimized for…
Track markers for Lionel tubular tracks. I designed these markers to show which track correlates with the signal on the turnout. I designed these markers with a hole large enough to accept a #6 screw, Generally, I print these upside down…
This is a Lionel Prewar style freight or passenger frame. Measurements were taken directly off of a Lionel Prewar car so that the hook and latch style couplers fit without any issues. The wheel mounts I did not design. I took them off of…
Small circular lid that covers Lionel and potentially MTH vat cars. includes grooves. (sorry forgot to take photos before giving it to the friend.) does not require specific print settings.
Now our Harry Potter Lego minifigs can ride inside the train. The passenger car base is not quite symmetrical. If it doesn't quite line up, turn it around.
3D model for 3D printing :) I print model on my old MK3S+ with PLA material, noozle 0.4mm, slicer options on 0.15mm Quality Good luck with print :)
Here he comes, Lionel Massive running down the field knocking down anyone in his path.
Printed the clamp parts as PETG 10-15% infill, inlays TPU 100% infill, at least 3 perimeters (important for the brass inserts) I used Claude building the scad files. I recommend two persons putting it together, the inlays can be annoying…
Bring the GOAT to your tabletop with this dynamic 3D miniature of Lionel Messi . Sculpted with care in Blender, this model captures the soccer superstar in a classic, action-oriented pose, perfect for fans of the beautiful game.
Now our Harry Potter Lego minifigs can ride inside the train. The passenger car base is not quite symmetrical. If it doesn't quite line up, turn it around.
Popis Lionel Messi – Dynamická fotbalová figurka (3D model inspirovaný legendárním hráčem) Tento 3D model zachycuje dynamický moment inspirovaný Lionelem Messim, jedním z největších fotbalistů všech dob. Figurka zobrazuje hráče v běhu,…
This is a flatcar load for Lionel MPC era flatcars. It mounts on side accessory holes. 10mm slots for straws, holds 16 in total (4x4). Print 3 for best results. Space evenly settings: Sunlu PLA+ 0.08mm 5% infill 2 walls rectilinear…
Printed the clamp parts as PETG 10-15% infill, inlays TPU 100% infill, at least 3 perimeters (important for the brass inserts) I used Claude building the scad files. I recommend two persons putting it together, the inlays can be annoying…
This model is for the educational purpose of creating shades and colours by changing the texture.
Lionel Trains MPC-era GP-20 Diesel Fuel Tank. Designed for model 6-8463 but may fit other similar models. Print Settings Printer: Sindoh 3Dwox Rafts: Yes Supports: No Resolution: 0.2 layer height Infill: 20% Notes: I printed mine in Black…
I made this fun little remix for the Thangs hairify contest. It's not perfect, but you can style his hair and beard like you would style the Hairy Lion by _primoz_ https://www.thingiverse.com/thing:2007221 Resolution: 0.2 Infill: 15 Wall…
Adapter pins for joining Lionel O gauge tubular track to O27 gauge tubular track. This pin can also be used to modify a FasTrack to Tubular adapter to accept O27. Please note that unless using conductive filament, one may need to ensure…
2 .stl files for printing the track connection pins for Lionel O or O27 gauge tubular track. Please note that unless using conductive filament, one may need to ensure electrical continuity between the two track pieces by other means (e.g.…
🖼 Lionel .. "Filament Painting" 👀Preview: 🔧 Printing Settings: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Please do not change Z size! It will damage model. You can scale a little bit X and Y but let me…
