Counting matching models…
Versatile drain cleaning tool available in three lengths—15cm, 20cm, and 25cm—designed to effectively unclog and remove hair and stubborn debris from (drain) pipes. Works with most filament types, provided they aren’t overly flexible or…
About the MiG-23 Flogger The Mikoyan-Gurevich MiG-23 is a variable-geometry fighter aircraft, designed by the Mikoyan-Gurevich in the Soviet Union. It is a third-generation jet fighter, alongside similar Soviet aircraft such as the Su-17…
Print the paddles in TPU (I used Polyflex TPU95) and the handle in whatever you like. I used M3x10 screws and square M3 nuts. Use at your own risk.
The python code for the project is published here: jattie-ire/anemometer: 3D printed anemometer with a raspberry pi data logger (github.com) I designed this in order to find the best place in my garden to mount my vertical wind turbine,…
NoClogger - Amazon.com The Must-Have 3D Printing Tool 1.75mm (Black) (Note: I did not personally design tool or .STL files, rather I use this tool for my 3D printers and am sharing the vendor designed accessories I printed) This tool is…
Description : This instrument has some useful functions for Arduino users. Besides being a voltmeter with data logging, it could answer questions like "how much voltage falls on the LED at 10mA current?" or "is this an IR LED or what?" by…
This 5x1 Gridfinity Holder will hold your Pokit Pro All-in-One-Multimeter, Oszilloskop and Logger plus a few extra fuses. Note that I redesigned the base of the holder to save some material. You should be able to print that without…
New version for less temperature difference due to ESP heating In this version a measure ca. 0.3°C difference between an open (breadboard) design and the D1 and the sensors in this housing. In the old version it was around +6°C delta.…
I only made this case, original build instructions are here https://emariete.com/en/meter-co2-gadget/
The Columbus V-900 (see note below) is a GPS datalogger that I've used in the past to track bike rides when I didn't want to run a proper bike computer. Normally I have it in a pocket but I wanted to have a holder so I could have it on my…
The drain pipes in our shower were clogged recently and there was no way to use a plunger due to the hole being in a recessed channel. We couldn't use any chemicals either because they would not even reach the clogged part of the pipe.…
Picked up a No Clogger (if you don't have one…GET ONE!) and needed a way to mount to Multiboard. Found this HSW based one from Dorkvader97 and swapped the connector to a Multiboard one. Multiboard is the creation of Jonathan (Keep…
Meet David, the only NASA intern who thought the launch countdown was just a TikTok trend. He thinks he's funny just by saying "two in pink, one in the stink". With his limited training, excessive pink drip, and unmatched confidence,…
Simple print. Recommend maybe tree supports
This case encloses the following: esp8266 nodemcu v0.9 board mh-z14a co2 sensor, 0-5000 ppm range micro sd card digital humidity and temperature sensor 18650 lithium ion battery micro usb battery charger board power switch 1.44' oled…
I bought a NoClogger and I love it. It's really convenient. But immediately I took issue with storing it and how relatively easy it would be to bend it. I designed this sleeve to work with the SHIPS system for easier storage while still…
This model will fit in the honeycomb insert pieces for easier movability.
A relatively simple design for a desktop mount for the Testo 175H1 datalogger. I didn’t want to mount it on a wall, so this version allows you to easily transport the datalogger while providing convenient access to the USB port for data…
Use this swashplate gauge holder, to easily check your blade grip angles without blades attached.
This little hat add-on for XIAO incorporates a Sensirion SHT40 temperature and humidity sensor, the BH1750 ambient light sensor, a PCF8563 real-time clock for accurate timekeeping, and an enableable voltage divider to keep track of the…
A PCB Holder for the BeeLogger ( STM32 and Universal 2.0 ) to fit in a electronics box of 160mm x 120mm x 90mm — German --- Ein Platinenhalter für den BeeLogger ( STM32 und Universal 2.0 ), der in eine Elektronikbox mit den Maßen 160mm x…
To mount this, you'll need M4 threaded inserts pressed into the 2 holes which hold the datalogger into place. The hole diameter for the wall mount screws is ∅6mm.
I needed a longer solution for clearing Clogs out of my fully assembled Tool Head than what commercially available solutions could provide so I made my own out of a 200mm long, 1.7mm Diameter Stainless Steel Rod for which I 3D Printed a…
Przetykacz do lodówki. Odpływ lodówki czesto zatyka się. NIe wszystkie lodówki posiadają takie przetykacze. Zapobiega zapychaniu i ułatwia czyszczenie. Materiał: PETG - zapewnia elastycznośc i nie pęka
4 perimiter 100% infill 0.4 nozzle, 0.1mm layer height NO Supports
Introducing FlowHero, a cutting-edge solution designed to enhance the efficiency of 3D printing processes. This indispensable tool simplifies the removal of obstructions in tubes, extruders, and nozzles, eliminating the need for…
This takes a 1.5x300mm rod which you can get from amazon for around $6 for 10. You insert the rod into the handle.. That is it. You use it to push out clogs from your hotend. You do not need to disasseble anything so long as you're able…
Simple, effective hanger for the NoClogger nozzle unclogged for IKEA SKADIS. Uses the T-Clip mount system. Printed in PETG with 4 perimeters, 20% Gyroid infill, no supports.
Intro This project based on this article with some modifications https://medium.com/@joshhrisko/portable-gps-tracker-with-arduino-3affead7ba12 In my case i use XIAO ESP32 S3 with built in battery charge support. Yes, it is a little more…
This model is something i whipped up after having issues with clogs and tossing out nozzles left and right on my 24 printer farm. This is an easy print and only requires Glue and a copper rod listed below off amazon. Its as easy as Print,…
I filled the text with color and used a eraser to remove the color on the surface.
Building Tutorial Altimeter Datalogger with Display. Components needed: BMP280 sensor I2C to 16x2 display converter Pre-made PCB board Arduino UNO Jumper wires Soldering iron and solder SD Card Reader. Step 1: Preparing and Soldering the…
Datalogger based on ESP32S3 with ETH POE module measures temperature and humidity, publishes it on a webserver and sends the data to a server via MQTT. PARTS: ESP32-S3 ETH Development Board https://www.waveshare.com/esp32-s3-eth.htm…
I printed this model in black PLA with 0.2 mm, 30% infill and without supports.
Description : See: https://github.com/boda-akos/STM32-Voltmeter-Data-Logger-Calculator This instrument has some useful functions for Arduino users. Besides being a voltmeter with data logging, it could answer questions like "how much…
This is a hanger attachment for the model AZ88598 4 channel data logger. With the 4 embedded magnets strength, you will want to lift the datalogger off of the hanger posts before trying to remove the bracket from a metallic surface to…
I needed to add this smart monitor to a fish pond that i have, I remixed this drink floater to do this, the design was just perfect for my use. You can add as mush pontoons as you like and even arrange them as you like. I got the sensor…
Case designed to house a XIAO ESP32-C6 & Temperature, Humidity, Luminance logger hat. Prints best in PLA and .4 nozzle. Can be printed in petg as well. Case is designed to use usb-c to power the module. XIAO Board -…
two part (outdoor) housing for a 2.9" waveshare e-ink display and a ESP / Arduinio controller Front part with rain protection for display (big roof over display) Back part has a upper compartment for the controller with cables connected…
This is a mount for the Ikea Grillskar backing board mount for the NoClogger tool. Features a tip with a ridge to prevent the tool from slipping off the mount. See more on the NoClogger below: NoClogger - Amazon.com The Must-Have 3D…
After building the first data logger I updated it making some improvements. It now collects UV, temperature, and humidity data and then a second data temperature sensor provides data from a separate spot to the main housing. It uses an…
This model (3 parts) is a replacement case for the original case of these temperature loggers: https://www.geminidataloggers.com/de/data-loggers/tinytag-plus-2/tgp-4104 The case design consists of three parts: The case which houses the…
This is a wall bracket for a Hamboard logger. Therefore relatively solid and stable. Recommended material: ABS or ASA-X I have used ASA-X. Printed on the side with support for the drill holes. Could also be printed without support…
Printed in standard PLA settings and slowed way down, about 50 mms.
Deze behuizing is gemaakt voor de DSMR logger v4. Dat is een DIY kit op basis van ESP8266 die de gegevens van je slimme meter kan uitlezen. Zie hier voor meer info:…
Tested on a i3-mk2 with Prusa PLA, default settings (with the sole exception of Hilbert curve for the bottom infill). The enclosure is designed for this PCB: https://www.xul.it/blog/index.php/2020/05/16/envlogger-v1-rev-a/ Fusion360…
The Creality nozzle declogger is a great tool that's available for very little money. The idea is that you poke this thing into a heated nozzle and boom, it declogs things. Unfortunately it doesn't come with a cover or a sheath or any…
https://github.com/Scorch1262/Datenlogger-MK1
Gear Unclogger Every sim racer knows the feeling. The race is going fine, then you miss a gear and everything backs up. You need a professional. It's ridiculous to look at and comfortable to use, and it does a surprisingly good job of…
If you like the design please support my work. Even a small tip of 1$ helps. Thank you. paypal.me/GuyWithDrones Material: TPU Gyrologger for FPV drone. Features: 30x30 stack 2x pieces DSLR mount Top plate is made for Gopro 7 cage (perfect…
Add-on for the Eupry logger to have a magnetic base. Disigned to use 20x2mm neodymium magnets that are glued in place. Then the hole thing gets glued to the original lid (or with double sided tape) Even 1 magnet is enough... Print…
This model is being shared in studies of nocturnal perspiration aka night sweats. This is all being done by a Q-Strip, a new phenotypic digital biomarker under validation. This model is a part of a bigger course of “nocturnal sweat" in…
Halter zur Montage eines Inkbird-Temperatur-Loggers an dem Gestell eines Intex-Pools mit Kabelbindern. Der Halter hat zwei Hohl-Kanäle um Kabelbinder durchzuführen (wie bei meinem anderen Design: https://www.thingiverse.com/thing:4428817…
Reptile temperature and UV data logger I wanted to be able to monitor the temperatures and UV for our skink more closely. This was my first time using Arduino so it was a bit of a learning curve for me. So this is how I am doing it. This…
For the top, I added mounts for a VOC sensor . I also added little grates over the sensor holes and labeling to the underside. For the box, I enlarged the USB-C hole slightly to fit the cable I have, added a hole on the opposite side to…
https://github.com/Scorch1262/Datenlogger-MK9
Look.... no one but me needs this. Who else is mounting $2000 dollar data logger on an r6? This if for that one other crazy person racing motorbikes.
I wanted to have a GPS data logger that I can record data for my hiking trail then import it to Google map with KLM file format. Required components Micro SD Card Breakout Board…
https://github.com/Scorch1262/Datenlogger-MK8
3D printed snap fit enclosure for the Disconnected CO2 Data Logger project. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 10 Filament: Matter Hackers PLA Category: Electronics
I designed this case to hold a GPS Data Logger I built using the TinyCircuits TinyDuino, TinyShield USB & ICP Stack, TinyShield microSD, and TinyShield GPS modules. The case is designed to be mounted to a quad-copter via cheap Velcro…
3D printed housing for 4 Channel Temperature Data Logger (DiscoLapy TDL V.1). The full description of the 4 Channel Temperature Data Logger (DiscoLapy TDL V.1 is here:…
Background: This is part of a much bigger system design which is detailed here: Mountain Bike Data Logger Detail: The crank speed sensor, cadence sensor, is mounted using the standard ISCG mounts. The part likely is compatible with other…
Background: This is part of a much bigger system design which is detailed here: Mountain Bike Data Logger Update 7-26-2026 : I put a rib on the top strut piece of magnet mount to stiffen vertically. I noticed a 45Hz peak in the…
Update 2026/8/8: I added a gusset where the circular part transitions to the downtime of the magnet mount. I noticed a small crack and a lot more flex. Maybe due to a crash but was an easy fix to make stronger and still clears the ribs in…
Background: This is part of a much bigger system design which is detailed here: Mountain Bike Data Logger Detail: The rear shock stroke sensor is specific to my shock, Cane Creek Coil IL, but likely easy to modify design for others. The…
Background: This is part of a much bigger system design which is detailed here: Mountain Bike Data Logger Update 7-26-2026 : Updated design to use stainless bushings to give the calipers bolts something to clamp down on. This was a major…
Background: This is part of a much bigger system design which is detailed here: Mountain Bike Data Logger Detail: The rear shock stroke sensor is specific to my shock, Cane Creek Coil IL, but likely easy to modify design for others. The…
A fun floppy flogger. I printed the grip split in half and glued it together for max stability. In hindsight I think printing it standing on the back with 5 perimeters and 20% infill should be more then stong enough. Print the wiggly bit…
Turn the logger the other way to protect it during transport. Buy 3 suction cups on ALI.
For my shop, I have a database that is fed from several SP-2000-20R temperature humidity sensors. Double sided tape (not even the 3M Mounts) doesn't stick to 24 year old T1-11 paneling with three coats of poly. So I made this quick and…
Unveil the essence of craftsmanship with the 'Long Flogger', exquisitely designed to elevate your cosplay experiences or add an extraordinary touch to your workspace decor. Every inch of this piece has been diligently crafted, reflecting…
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 1 hour Slicer settings: 0.2mm layer height Post processing instructions: Check fitting, attach to the wall.
Description This project is a standalone, battery-powered Event Counter and Logger built around an ESP32. It is designed to track manual inputs—such as visitor numbers or recurring events—with high precision and reliability. Turn-On…
Fits the older model of Elitech RC-4 temperature logger. The newer one is slightly larger. The asymmetry and gap in the lid are to accommodate the temperature probe cord. Since mine is used outside, I printed in ASA, and because I only…
We created a temperature, humidity and CO2 Logger in our Office. The Logger is made with an Arduino Uno with Ethernet Shield. As Sensor we use a SCD30 from Sensirion. To get reliable readings we needed a housing, so i created one. For…
A remixed version to produce a belt-worn GPS data-logger for geotagging photos. Box is optimised for an Adafruit Feather M0 Adalogger https://learn.adafruit.com/adafruit-feather-m0-adalogger combined with the Adafruit Ultimate GPS…
Case for sensors and logger pushing data to adafruit.io Code and more details on GitHub: https://github.com/gfbarros/ESPhumidity
A simple, snug case for the Arduino Uno together with a logger shield. I could not find one online, so I decided to make my own by altering an existing Uno case to fit the logger shield. The fit is pretty tight, which makes it feel very…
Keeps SM GPS-Logger in a good signal position and makes SD-Card access super easy. Printed in ASA, 50% Infill, all supports on.
