Counting matching models…
Simple solution for using the Bosch 18V batteries as a power input source for M6D charger. For attaching the Bosch battery is used this model > Adapter with fuse >…
Features Removable power bank tray The power bank tray slides in and out easily, and is secured with clips. Accessing your 18650 batteries is very fast. Furthermore, the 18650 holder is an off-the-shelf part requiring minimal soldering…
Stand created to display the M6D magnum found here https://www.thingiverse.com/thing:2379783
Both models were made with slots to insert magnets for a easier deployment, making it also possible to retrieve the magnets if the print doesn't turn out so well. The size of the inserted magnets is 20 * 10 * 3 mm and they can be found in…
This device was developed to be attached with double side tape to the machine. For additional protection, a board cover was made to fit in the ESP32-S3 support and allow the connection with the battery and the external sensor. The code…
Organize your RC workbench with this compact Skadis mount for the ToolkitRC M6D Dual Smart Charger . While the original design was great for all-in-one portability, many workshop setups use a dedicated power supply tucked away elsewhere.…
This holder mounts to two of the standoffs in the front part of the mower. The standoffs are drilled and M3 heat set inserts (I used BOSSARD 1386743) are pressed in. M3 screws are then used to secure the holder. The PCB to the left of the…
Additional materials needed: USB PD trigger board - aliexpress.com/item/1005009301680543.html Female XT60 connector Wire Hot glue for gluing the lid Reccomended to print the lid with fuzzy skin enabled to improve grip.
A slime VR case for a LSM6DSV + 18650 battery, handwire and a rocker switch like a PSU one
I printed the hopper in PLA and PETG, both are working fine. The lid is PLA. For the hopper I put the seam to the back and used a brim. Otherwise nothing special, 0,4mm nozzle, 0,2mm layer.
Gridfinity-compatible holder designed for the ToolkitRC M6D dual smart charger . Keeps the charger, cables, and small accessories organized in a compact layout. Available versions: 2×3.5 – Charger with large cable compartment (allows…
Gridfinity-compatible holder designed for the ToolkitRC M6D dual smart charger . Keeps the charger, cables, and small accessories organized in a compact layout. Available versions: 2×3.5 – Charger with large cable compartment (allows…
