Counting matching models…
!! You will find more for free / pay what you want in my ko-fi shop !! Ruined dungeon walls for the MagHex system for use in Gloomhaven and Frosthaven. Contains a 3x3 mm MagHex base. Prints well on .2 and even on .3 layer height.…
All I did was add holes in the bottom of Robagon 's and liquidlogic 's pillars for 6x3 magnets to use them in Xevin 's MagHex Gloomhaven Tile System (links below) but other magnetic systems will work too. It was an easy and fast edit on…
!! You will find more for free / pay what you want in my ko-fi shop !! Stone Floor tiles for the MagHex System, including cobblestone, klinker and brick pavement. Intended for use in Gloomhaven and Frosthaven. Material from polyhaven.com…
!! You will find more for free / pay what you want in my ko-fi shop !! I remixed some openforge cave tiles to fit into the MagHex system for Gloomhaven. Included various heights and scales to add some variance. Printed on Anycubic Kobra.…
Stone pillars for the MagHex system for use in Gloomhaven and Frosthaven. Intended for FDM printing. Hollowed to save filament. Contains a 3x3 mm magnet MagHex Base. Supportless.
!! You will find more for free / pay what you want in my ko-fi shop !! Metal overlay tiles for the MagHex system for use in Forsthaven, as an equivalent tile for the “dark metal” map design. The tiles replicate one of the big floor…
!! You will find more for free / pay what you want in my ko-fi shop !! Wooden Planks tiles for the MagHex System. Intended to use in Gloomhaven and Frosthaven. Remix of Diona's WDhex wooden floor tiles. Comes in 3 slightly different plank…
!! You will find more add-ons for free / pay what you want in my ko-fi shop !! Wooden Walls for the MagHex system. Intended to use in Gloomhaven nd Frosthaven. Regular MagHex bases (3x3 mm magnets) are included. Prints well on .2 and even…
I remixed the original Ice Pillars made by jutsus to fit into MagHex tiles. Added a flat surface to allow figures to stand on them. I recommed printing upside down in vase mode, using transparent pla+.
I remixed the original Ice Spikes by bdworks4 to create a more even surface so that a figure can stand on the terrain and I added a base to make them fit into MaxHex tiles.
Ancient metal walls for the MagHex system for use in Frosthaven. Regular MagHex bases (3x3 mm magnets) are included. Release October 20, 2023 2 and 3 tile straight walls Corners
This is a multi-layered box for storing the MagHex system. Uses 7x3 mm magnets to hold the different case layers together. Base: Case for MagHex Tiles consists of 3 stacked layers each layer provides space for 4 separate trays where the…
Loot Token for Frosthaven. I prefer a traditional RPG loot bag more than a postman case, so I remixed eleode's model for maghex. Updated version 2 as I accidentally found out that ball-shaped holes work better than the original one.
V1.2: Increased depth of magnet recess in Bottom Jig to make the magnet sit flush, instead of protruding V1.1: I noticed that the magnets tended to go perpendicular in the channel when the magnet count got low. I've added a top stopper to…
Remix from Robagon3D's model. Rock Column terrain tile replacement for Gloomhaven board game. You can flip this on both sides for variation. Could be used as Ice Pillars for Frosthaven. Tile Count: 6x (1 hex) Rock Column
Model CHANGELOG: V1.0. Initial release TLDR; Maghex compatible and polarity independent magnetic bases for Frosthaven, Gloomhaven(soon) and any other hex based game. .zip file has much better folder structure and all the CAD files…
This is a parametrically redesigned version of the original maghex tile system for gloomhaven. The main feature is improved snapping action for the magnets. The tiles that fit into these bases can be found here:…
!! You will find more for free / pay what you want in my ko-fi shop !! Decorative Stone Floor Tiles for the MagHex system, inspired by the Hirst Arts stone floors for Gloomhaven / Frosthaven September 11, 2025 initial release, 2 variants:…
Inspired by GarageBay9's Open WarHex - modular, scenic 3D Hex terrain project to create a system for the Robagon's Terrain Overlay Tiles For Gloomhaven . The elevation is 10mm, the base is about 2mm height. The tiles perfectly fit inside.…
!! You will find add-ons (e.g. the lava pits) for free / pay what you want in my ko-fi shop !! Volcanic cave walls for the MagHex system. Intended to use in Gloomhaven nd Frosthaven. Regular MagHex bases (3x3 mm magnets) are included.…
MagHex metal obstacles for use in Forsthaven.
!! You will find more for free / pay what you want in my ko-fi shop !! Flat stairs tiles for the MagHex system for use in Gloomhaven and Frosthaven. September 11, 2025 initial release, flat wooden stairs
72 Unique rocky floor tiles for Tabletop gaming. As there are 72 tiles I did not upload each tile individually, they are all in the .3mf file. They are scaled at 38.1mm x 33mm for Maghex but you can easily re-scale them to your…
!! You will find more for free / pay what you want in my ko-fi shop !! Lava tiles for the MagHex System. Intended to use in Gloomhaven and Frosthaven. Comes in 3 slightly different layouts.
V1.2: Changes interference to make it easier to initially engage magnets with larger chamfer. Switched to derived design in Fusion 360 so that all changes to the base model will update other models. V1.1: Updated models to match the…
LED wall pieces for the MagHex system, mainly for use in Frosthaven and Gloomhaven. Variants: Energy Core, Big Brazier, Small Brazier. What you need: CR1220 batteries 5mm LEDs 15mm glass marble for the Energy Core variant Simply push the…
Remixed in Maghex, Adjusted the size of the model a bit so it could swallow the magnet underneath. Updated version 2 as I accidentally found out that ball-shaped holes work better than the original one.
<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Summary MagHex Doors for Gloomhaven I designed these doors to work with MagHex Walls and…
MagHex Bases with a flat top, 3x3 magnet variant, e.g. if you want to build scenery on separate MagHex bases and don't want to use your regular floor bases.
I have edited Diona's floor tile to fit into the MagHex system I use for Gloomhaven. Thank you Diona for the design.
These are alternative MAGHEX BASES that use 5MM MAGNETIC BALL (Buckyballs) for the edges. All posted bases have been tested and work very well. Shout out to Xevin who is single-handedly responsible for me owning a 3D printer. Print…
I linked some of the parts and added modifiers to close magnet holes. Parts 14 - Front 2 linked 3 linked 4 linked 5 linked triangle (2-1) round (2-3-2) 5er (3-2) Assembly The Tile 14 can be done with: 14-front 2 times the usual A Tile 1…
This magnetic gloomhaven tile base is my approach to design a more durable, parametric and magnetic piece for the gloomhaven community. I was inspired by this model but at least for my print the magnets kept destroying the base when…
Negative volume modifier to turn any model into a Maghex compatible model using 3x3 magnets. This modifier allows for easy insertion into any model. Steps for usage: NOTE: Steps given for PrusaSlicer. Add the model you wish to modify for…
A set of adapters that allow to use HexScapes walls and terrain primitives with MagHex
Simple solution for Key Returns. You can print the entire key return, or since the key holder has embedded magnets you can just print it and the key will hold to any metal surface! I printed this at .32 layer height with a .6 nozzle, but…
An alternate pusher to be used with the Maghex Perfect Set Magnet Jig by Kopo With the original pusher on the first use, one set of magnets always ended up on top of the bars that set the magnets in place (I'm guessing my technique isn't…
Mix of Nicholas Parker's 360's MagHex with the riser from Nephilim2001.
A very rough remix of the Maghex bases into a single Gloomhaven Tile C. I just merged them in Slicer to a single model so the label isn't correct and there's a small chamfer on the bottom where they were linked, but I've used it and it…
A very rough remix of the Maghex bases into a single Gloomhaven Tile J or Frosthaven Tile 11. I just merged them in Slicer to a single model so the label isn't correct and there's a small chamfer on the bottom where they were linked, but…
A very rough remix of the Maghex bases into a single Gloomhaven Tile C. I just merged them in Slicer to a single model so the label isn't correct and there's a small chamfer on the bottom where they were linked, but I've used it and it…
Mix of Nicholas Parker's 360's MagHex with the riser from Nephilim2001.
<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Summary MagHex Doors for Gloomhaven I designed these doors to work with MagHex Walls and…
Added a 3mf file with layerswitch to create a snowy area around the crystal.
This tile has 3x3mm magnets on the edges and a recess for a 6x3mm center magnet. To achieve the effect pictured, I painted the bottom of the tile with a few colors, green, blue and variations of darker blacks to achieve some depth on some…
A very rough remix of the Maghex bases into a single Gloomhaven Tile J or Frosthaven Tile 11. I just merged them in Slicer to a single model so the label isn't correct and there's a small chamfer on the bottom where they were linked, but…
These are alternative MAGHEX BASES that use 5MM MAGNETIC BALL (Buckyballs) for the edges. All posted bases have been tested and work very well. Shout out to Xevin who is single-handedly responsible for me owning a 3D printer. Print…
Update v5 The difference in versions is the diameter of the pocket for magnetic balls Big - 4.25 mm Normal - 4.2 mm Small - 4.15 mm Very Small - 4.1 mm Update v4 Added few different designes Now every model have 3 sizes of holes for…
Remix from Robagon3D's model. Tile Count: 3
Put two 3x3mm magnets in the holes and you are done. Make sure the polarization is correct. The diameters of the small circles are the long diameter of a hex tile.
Maghex base using sphere magnets. Or you can still use cylinder for the middle. The holder should be compatible with Xevin's holder .
Update: Added a redrawn version. Enlarged the spears so they are harder to break. Remixed with Maghex. Lifted the pit to hide the sneaky magnet. Updated version 2 as I accidentally found out that ball-shaped holes work better than the…
![[REMIX] Stone Pillars for Gloomhaven with 6x3 magnet Holes for Maghex](https://media.printables.com/media/prints/191252/images/1793058_b3977f03-5ded-4370-ab38-6b3fc28d5ee3/img_2250.jpg)
![MagHex Doors for Gloomhaven [RE-UPLOAD]](https://media.printables.com/media/prints/fc529e7d-01bc-42a7-afcf-957795ed3548/images/12680901_c3ac7258-e71d-4dae-8c69-06ef71c4159f_33d8a4a7-fd0a-4380-b967-2aab9532f26b/doors-render.jpg)
