99 models
I only have two stamped sheet metal stripper clips for my 98k and I wanted a few more (without breaking the bank), so I did some tests… this is the 8th iteration so far and it works reasonably well. I closed off one end to stop the rounds…
I got a request for a ammo box for Swedish Mauser. The spacing is 50pcs/82x12,60mm. The ammo looks very pointy from unlike the sketch, but I have followed the measurements that were given. Haven't printed it but i have moved the lid in…
The 7.92×57mm Mauser is a rimless bottlenecked rifle cartridge that was used as the German service cartridge in both World Wars. Category: Sport & Outdoors
I got a request for a 6,5x55 ammobox of the new model i make. I made 2 sizes for the shell 12,42mm and 12,60mm. So you can choose if you want a little tighter fit or not. I made a o-ring to fit the lid but it's made for 2mm o-ring string…
7.92x57mm Mauser, also known as 8mm Mauser, 8x57mm, or 8x57 IS, is a centerfire rifle cartridge designed in Germany by the Gewehr-Prufungskommission in 1903. Print this for props, display, education, training, just because it's cool, or…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Cartridge for a 7.92x55 Mauser to scale Category: 3D Printing
Robert Mauser Spooler for Formfutura refill filament
Found some measurements of the 8x57 I cartridge used for the K 98 and designed some just for fun in cad. For the clip I haven't found numbers so I used photos as reference. Category: Props
A fun mechanical fidget - 'semiautomatic' (fires 3 shots), prints easily without support, fits in the palm of your hand. NOTE: This gun is pretty tiny and cute - but don't ever carry or threaten someone with items resembling firearms. It…
Police Academy - Cmdt. Mauser - 1984 3D printable model.
You should use PLA because if you use PETG the firing Pin of your rifle could be damaged, if you dont use it in a rifle it doesnt matter.
7.92X57 Mauser stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Imitation of 7.92 x 57 Mauser cartridges. It prints really well. It is necessary to use supports! If you are interested in my work, the links are here:…
Jig for holding a mauser 98 receiver. The two action screws go in through the bottom and screw into the receiver. The jig can then be clamped into a vice to allow a stable way of holding onto the receiver while working on it. Print…
Scoped Mauser/kar 98 for lego miniatures supports are needed, you can print on its side so it takes little supports to print.
EN: IBC Tote NW150 Leaf Filter Basket A custom-designed leaf filter basket for the top opening of an IBC Tote (Mauser 1000L) with an NW150 (6-inch) thread . It effectively catches leaves, moss, twigs, and other debris coming from your…
7,92×57mm; 8×57 IS; 7,92×57 Mauser; 8mm Mauser loading block for 100 cartridges
The legendary Mauser C96, now in the very hands of your dummy 13.
This is a mauser german pistol for Dummy 13 action figures.
I used spiral tube that has 60cms of diameter. The two models are for different gutter dimentions, 100cms diameter and 80cms. Works nicely ;)
7.92X57 Mauser Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your regular…
These grips are for an original Mauser C96. The hole fits a Ruthex M4 threaded insert, an additional M4 screw in appropriate length is needed. I recommend printing it from PETG or other rigid material. I also recommend printing it with…
I printed the nice pistol Mauser C96 from 1896. Being employed at Diehl company which owned Mauser I needed to decorate this pistol with a nice Mauser emblem. It is not original on the pistol, but the original is so small imprinted that I…
This is a remix of my Mauser lug lapper. I've made several improvements to the design. It's now modeled in cad with easy to change parameters so it can easily be adapted to different actions. This is for a large ring Mauser with a 1.1"…
FormFutura refill flange 200mm
Print with ≤0.4mm nozzle and smallest available layer height.
This is for a small ring Mauser with a .98" 12tpi thread. It will also work with Gewehr 88s. The plunger is a welding tip from a Bernard q-gun. A 5/16" bolt could also be modified to work. The plunger can be 3d printed.…
Cleaning rod support for Double Bell airsoft mauser 98k.
A 7x57 Mauser version of my reloading tray.
Simple 10 round ammo box with sliding lid and snap lock for caliber 8x57 mm IS / 8 mm Mauser. Prints without supports. I took the CIP measurements and added some space all around - seems to work well with S&B FMJ ammo.
This is a 3d printable tool for lapping the locking lugs on a bolt for a large ring mauser. I used a 3/8" spring 1-1/4" long. A 1/2" bolt 1/2" long is used to adjust the tension on the spring. I have included a 3d printable bolt for those…
7X57mm Mauser stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
Design Concept The Mauser M18 Rifle butt stock bullet storage is conceived to provide a convenient and secure place for ammunition storage directly on the rifle's buttstock. Utilizing a sleek, ergonomic design, the model is tailored to…
You just got a used IBC for your project, only to find that the valve handle/gate piece has lifted up and the clasps are cracked. This is probably what you need. My tote has mauser logos here and there, I don't know how standardized the…
7X57mm Mauser Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
Není poptřeba žádné podpěry ,tisknout nejlépe z PETG
this is a mauser i think it might be a kar98k though.
Labelled loading block with both Solid and Vase Mode versions. Category: Tool Holders & Boxes
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
A fun mechanical fidget - 'semiautomatic' (fires 3 shots), prints easily without support, fits in the palm of your hand. NOTE: This gun is pretty tiny and cute - but don't ever carry or threaten someone with items resembling firearms. It…
Simple 10 round ammo box with sliding lid and snap lock for caliber 8x57 mm IS / 8 mm Mauser. Prints without supports. I took the CIP measurements and added some space all around - seems to work well with S&B FMJ ammo.
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
Model of the 7.63x25mm Mauser cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale. Use superglue to conect the parts. Casing is made to be ligth and cheap to print, if you want to add…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
The Mauser C96, nicknamed the "Broomhandle" for its distinctive grip, is a historic German semi-automatic pistol (1896) known for its early success.
The Expendables - Trench Mauser (Arnold Schwarzenegger) - 2010 3D printable model.
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
These boxes have twice the print time of Double Snap Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/519398 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
These boxes have twice the print time of Double Snap Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/519398 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
This version has these improved features: ramped latch catch with a groove to retain snap latches text for multicolor ramped latch fixture for easier assembly both Spring Latch and Snap Latch - choose your preference The alignment tabs on…
This version has these improved features: ramped latch catch with a groove to retain snap latches text for multicolor ramped latch fixture for easier assembly both Spring Latch and Snap Latch - choose your preference The alignment tabs on…
I wanted a small, sturdy package to take along a few rounds to the range, so I came up with this minimalist design. The case rests on its shoulder, so the bullet of a standard FMJ round has no contact with the box. The lid has a few ribs…
This version has these improved features: text for multicolor ramped hinge fixture for easier assembly either square or round dividers Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in my Ammo Boxes Collection…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
This version has these improved features: text for multicolor ramped hinge fixture for easier assembly either square or round dividers Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
These boxes have twice the print time of Double Snap Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/519398 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
Model of the 13.2×92mmSR cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be ligth…
These boxes have twice the print time of Double Snap Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/519398 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
