22 models
I printed a selection of fan ducts for my Mendel90. Some of them didn't fit and others just didn't work, so I designed my own. I have copied some of the best features from other designs and merged them into a model that will fit on the…
because the original version is for the e3dv5 i have mixed them up .. i make it smaller and without support .. the bottom is open for better fit with the nut from extruder .. just printing this version .. update: printed very well and…
Still in prgress. I ordered the wrong fans. They just run good at 12V, but i want a PWM 0-12V blower fan. If anybody knows a good blower fan, please comment. This is the fan i designed it for: http://bit.ly/1YWLV7y At 100% (12V) both fans…
Holder to mount a silhouette cutting plotter blade (drag knife) on a Mendel90 3d printer, to use the 3d printer as a cutting plotter / vinyl plotter. Might fit other printers as well. Meant for SILH-BLADE-3-3T, fits on extruder mounts…
So this is a thumb screw for the two bolts! The first times, it can be hard to put on the screw but after a few times it will fit! Instructions 100% Infill 0,2mm layer height Category: 3D Printer Accessories
This filament cleaner works with side mounted filament rolls. It will clean you filament from dust. The thing has a hinge to guide the filament without friction, also when you filament roll gets nearly empty. Please upload a photo of your…
When I bought a new hot end from E3D-online I discovered that it wouldn't fit inside the fan duct on my Mendel90, so I redesigned it. This duct is for a 60 mm fan and has a larger central hole and a slimmer profile, which allows it to sit…
This shroud fits NumberSix's X-Carriage Fan Mod , the Greg's Wade reloaded extruder (Mirrored JHead version), RalphHiltons Part-cooling fan and the E3D v6 Hotend. The fan holes are 2.5mm to tap an M3 thread into. The hole at the top…
Just the first design. Does not look good from the front because of the round dibonds. Next version will be better. ;-) DONT USE THIS! I designed a new version http://www.thingiverse.com/thing:735726 Category: 3D Printer Accessories
I really wanted to be able to use Triffidhunter's parametric herringbone gears ( http://www.thingiverse.com/thing:10707 ) as recommended by Richrap, but they were just too tall to fit on my X-carriage. This adapter will raise the Wade's…
Mendel90 - X-Axis for the Sturdy Version (10mm rods) using a T8 Lead Screw instead of the normal 8mm Threaded rod. It's a complete rebuild, so addons that screws on might not fit, but all Holes and faces should be where there should be !…
This shroud fits NumberSix's X-Carriage Fan Mod , the standard Mendel90 wades extruder , RalphHiltons part-cooling fan and the E3D v6 hotend. I've made another version for the Greg's Wade reloaded extruder :…
This is a remix from Nopheads mendel90 wade extruder. The extruder blok is made for E3D v6. Use the bowden tube from the E3D, and make it a tight fit at the extruder gears. Use the same vitamins from the original Nophead extruder. The…
An alternative holder for the z axis rod and rod Print instructions Category: 3D Printer Accessories Print Settings Printer: Mendel90 Rafts: No Supports: No Resolution: 0.2mm Infill: 20%
This is a remix of @DanielBull's nice Z probe ( https://www.thingiverse.com/thing:599262 ), hand-modified to fit the "sturdy" variant of Mendel90. It additionally allows for an extra block for adjusting the distance to the X endstop - in…
revised the Y axis adjuster a bit to be more sturdy... i had it break twice with really good prints...both broke in the same spot, right at the rear hook portion...so i beefed it up a bit... worked like a charm... will post a photo as…
A LED holder for the mendel90 dibond or sturdy fan duct. Holds 2 5mm LED with a LED holder. All parts from radioshack. pn: 276-0080 & pn: 276-0017...i used a little hot glue to hold it to the fan duct. Even with the hotend at 275C it…
Two of these brackets mounted on the side boards will support an axle capable of holding 5kg of filament. Instructions Print with plenty of infill to make it strong enough to support the weight. Position the bracket on the board as far…
Smoothieboard mounting plate that adapts to the pre-drilled holes for the Melzi on the Mendel90 DiBond sheets by Nophead. The adapter was remade in OpenSCAD, please check dimensions first. I pulled the hole dimensions from the…
Probe finally arrived and fits perfectly fine. Needs 2 M3 nuts and 2 M3 screws. Guide the ribbon cable along the existing X-carriage cable. You may have to crimp/solder the connectors after passing it through the sidewall, it will likely…
Update: Added pictures of the final revision. Working flawlessly so far, can easily run 10mm/s or more with no noise. I got really tired of the Mendel90's threaded rods.. they're slow, they take so many steps (3200 steps per mm!) and make…
To fit lead screw nuts to Mendel90 Z-axis. See photo's. Parametric .scad file, can be adjusted for other sizes. Print Settings Printer: Mendel90 Rafts: No Supports: No Resolution: 0.3 Infill: 20% Filament: PETG green (does not matter)…
