Counting matching models…
There are 2 versions: The regular, if you love simple things. The clip, more useful in vertical configuration, especially if you need it to stay fixed without holding it with your hands. Every stl contains both versions in order to limit…
I had issues with the stock alignment guides because they had play or didn't fit both the alu extrusion and linear rail so I designed complaint ones so they are a lot more forgiving in terms of accuracy on your old printer. this is the…
You can use a screw and nut in the top hole to secure the cart for storage https://a.co/d/5vAbloZ I used these grease nipples. I needed to heat the nipple and screw it into the cart. might need to make the threads bigger
It has come to my attention that if you have v-slot framing and not t-slot you might struggle getting anything smaller than MGN12 to sit nicely (mainly because the gap in the V-slot is over 9mm). Now I know many will say “Just buy T-slot…
well, where to begin… This was kind of a dream and to be honest I didn't expect it to work given the size it had to work in… After the usual staring at the PC with ideas of what / how and what not to do, I just went for it and allowed the…
I used it to slide the carriage block of the MGN7 linear rail for cleaning and lubrication without losing any beads. In my particular case, I used it on the Chaoticlabs Voron Tab V2, but it should work on any MGN7 rail. There is a stop at…
I tried to use default voron clip (via PIF) for alignment of the rails but it was not good enough on tolerances, reprinted it myself however found that 7mm rail cutout possibly had wrong shrinkage compensation. It gave me non-parallel…
Reinigungsbox für MGN7 Linear lager Budget Ausführung, wenig Material verschwendet. Auf den Bildern noch ohne Zwischenwand, habe eine Zwischenwand eingefügt für Vor- und Nachreinigung Cleaning box for MGN7 Linear bearing Budget design,…
Attach an MGN7 rail to a 2020 extrusion. Available in three different lengths, mix and match to meet your requirements. Hard to do right, as the rail is only just wider than the slot (and so does not sit on a flat surface by default). For…
V0 MGN7 Rail Bath After using the original Rail Bath now for over a year i finally misplaced it and needed to print another one. But it was just a little too big for the V0 sized bed. I did a quick and simple change to the design to make…
This compact and high-precision linear actuator is designed around common 3D printing hardware. It combines a Nema 14 stepper motor, an MGN7H linear rail, a trapezoidal leadscrew with nut and a coupler to deliver accurate, repeatable…
Quick and simple tool to prevent the carriage sliding off the rail when the stealthburner mounting plate is disassembled to create more space for pulling the XY belts through the carriage.
Printed in ABS, adapt to different shrink for PLA etc. Snug fit can be fastened with M2 8mm screw at hole position. I provide the STEP as usual.
Nut holder to easily attach mgn7 rails to DLLPDF brand extrusion without losing the nuts. Nut width 3.9 mm Hole Diameter 2.5 mm Hole Spacing 15 mm Total Length 145 mm
7mm linear rail mgn7h carriage servo motor mount with all holes
Same MGN7H X Carriage Mount but with an X endstop and smaller belt tolerances
Be sure to use a good slide in adapter to fit MGN7 rails in 2020 extrusions, I used this one and it worked great: https://www.printables.com/model/820358-mgn7-2020-mount-with-alignment-tool/files
Prusa Mini Z-axis upgrade: X-axis mount with a modified belt tensioner, with the option to add an MGN7 linear rail along the Z-axis. This upgrade increases printer speed and prevents axis distortion and vibration during operation. The…
Display your Voron toolheads! Didn't want my old toolheads just lying around. Makes a great accent piece in combination with MultiBoard. I created this to fit MGN12 and MGN7 rails, commonly found on Voron v0 and v2. Requires: 2 Flush Big…
It has come to my attention that if you have v-slot framing and not t-slot you might struggle getting anything smaller than MGN12 to sit nicely (mainly because the gap in the V-slot is over 9mm). Now I know many will say “Just buy T-slot…
Print with standard voron settings(5top/bottom, 4 walls)
Design intent: Allow user to swap original X axis linear rods for MGN rails, maintain compatibility with all hot end assemblies using unmodified original mounting profile, and minimize any impact on printing envelope. Disclaimer: Perform…
Z-axis 33mm and Y-axis 38mm end centering template for use when assembling the Voron Zero 3D printer kit.
Carriage can be slide on/off from one side. Print the carriage holder with the length parallel to your z axis and a small brim (~2 mm) for adhesion, if needed. So long as you don't have too much blobbing before and after extrusions on…
M2 T-nuts are pratically impossible to find. This 150mm rail allows to fix a MGN7 guide rail to a 2020 6mm profile. For MGN7 you need Din912 M2x8mm socket head screws. The spacing is 15mm. Print Settings Rafts: No Supports: No Resolution:…
Added new carriage to allow for 2 MGN7 linear rails on the X axis. Also included is a Y axis spacer. Full details are explained in this video….
