Search results: mik

Counting matching models…

Printables

Base for Mikehanger

Printer: Ultimaker S3E Filament: Extrudr glowEx PETG Layerhight: 0,2 Infill: 100%

Order a print of this model

Printables

Mikrotik hEX, RD2x0GS 10inch rack mount

Order a print of this model

Printables

Mikrotik wAP Adapter Plate 1/4" Camera Connection - DIN 4503-1 / ISO 1222

Informations Designed a Adapter Plate for my Mikrotik wAP AC Access Point to mount on any Camera Equipment. I use it with a Small Rig 10" Arm and a Manfrotto Super Clamp. Work really well and is very stable. You need some small screws to…

Order a print of this model

Printables

Alcancía de Mimikyu

Order a print of this model

Printables

Stojan mikroskopu (Microscope stand)

Vytištěno z materiálu PLA, výška vrstvy 0,25 mm. Pro zuby hřebenu, pastorek a osu výška vrstvy 0,15 mm. Matice přilepit do jednotlivých dílců dle výkresu. Výkres sestavy stojanu (výkres ve formátu pdf uložený v souborech): Typ mikroskopu…

Order a print of this model

Printables

Mikrofon Déčko - Držák / GoGEN Déčko HOLDER

Držák mikrofonu GoGEN Déčko pro Mic Stand. Vnitřní průměr 37mm a 34mm (kužel). Šířka packy pro upnutí 5,7mm.

Order a print of this model

Printables

Cajon Microphone Holder - Mikrofon-Halter für Cajon V3

The model allows to mount a microphone at the hole of a Cajon. The holder has a mounting position for. Due to the long arms, there is a support ring, that stiffens the arms. I attached felt gliders at the claws (see pictures) to get a…

Order a print of this model

Printables

Tiskátko do keramiky/těsta - kůň / ceramic/dough stamps - horse

pro snadnějsí tisk odnímatelná rukojeť velikost se dá libovolně upravit ve sliceru ---------------------------- Removable handle for easier printing the size can be adjusted freely in the slicer

Order a print of this model

Printables

Chibi Mimikyu

#0778 Mimikyu is a lonely Pokémon who disguises itself as a Pikachu toy to gain affection, but its true appearance is terrifying and dangerous to see, leading to a tragic existence where it must hide its true self to be loved. Available…

Order a print of this model

Printables

Mikrotik hAP AC2 19" rack mount

Simple one-sided rack mount for Mikrotik hAP ac2.

Order a print of this model

Printables

Corsair Swappable Pump Cap for Titan AIO Cooler - Kumiko Waves

A model of the capswap module inspired by Kumiko and Japanese woodblock print style

Order a print of this model

Printables

MikroTik CRS305-1G-4S+IN 19-inch Modular Rack Mount

A 19-inch, 2-part, modular rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't…

Order a print of this model

Printables

10'' Rack Mount for the Mikrotik hAP ac lite

This is a specialized 10-inch rack mount solution designed to securely house the compact MikroTik hAP ac lite, wireless router. Given the hAP ac lite's small form factor, a dedicated 10-inch rack mount is ideal for integrating it neatly…

Order a print of this model

Printables

IKEA KALLAX Cabinet Doors REMIX - Kumiko (Kakuasa)

I'm thrilled with Josh Makeshift's IKEA KALLAX cabinet door model , but I wanted different doors. Wanting to try my hand at Kumiko-style modeling, I went with the Kakuasa pattern and I'm super happy with the result. All instructions…

Order a print of this model

Printables

Umikot WDT Tool holder for Lelit Mara X

Since I wanted to hang my WDT-Tool next to the tamper of my Lelit Mara X Espresso machine, I:ve merged the two models together. Print with supports on bed only. Print with PETG or ABS, PLA works if you use it in the back of the machine…

Order a print of this model

Printables

Headphone Measurement Stand for MiniDSP UMIK-1

A headphone measurement rig built around the minidsp umik1. If you make different baffle insert for it, it will probably also work for there mics.

Order a print of this model

Printables

Mikrotik LtAP car mount

Mikrotik LtAP car headrest mount.

Order a print of this model

Printables

Kumiko lamp

Kumiko Lamp Simple yet functional watch Kumiko lamp, designed in collaboration with Fox & Train ! No glue or support required! Features snap-in tabs. Printing: Print frame parts in dark brown and Kumiko panels in latte brown (recommended…

Order a print of this model

Printables

Mikrotik hAP ac3 / hAP ax3 holder RACK 10"

10inch rack holder for Mikrotik. With this it can be mounted only from behind, because hAP ac3 (ax3) is too wide to stitch it between rails. Printed from PETG, holes are 5.8mm, so M6 screws can be directly used. Use organic support for…

Order a print of this model

Printables

Mikroskop - Držák telefonu / Microscope - Phone holder

Doplněk pro model stojanu mikroskopu dle 3-1224-004 (viz odkaz níže). Rozměrově nastavitelné pro telefony 60x135 mm až 100x175 mm. Nastavitelná poloha úhlu pozorování. Vytištěno z materiálu PLA, výška vrstvy 0,2 mm. Matice (2 ks) přilepit…

Order a print of this model

Printables

Rummikub Case

Overview Purpose A simple, support-free 3D-printable replacement case and lift-on lid designed to match the footprint and function of an original Rummikub tile container. The model is intentionally minimal: a rectangular case body (the…

Order a print of this model

Printables

Foto ramik

foto ramik jednoduchy na tlac rozmer 100x150

Order a print of this model

Printables

Kumiko Coasters - Hexagonal

Give your drink something nice to sit on with one of these coasters, inspired by the Japanese woodworking technique of Kumiko (組子) ! There are six designs to choose from in total: Mitsukude (三つ組手) - once known as the ultimate technique…

Order a print of this model

Printables

Kumiko Storage Box / Basket Set

An easy-to-print and lightweight storage basket displaying the simple but elegant Mitsukude ( 三つ組手 ) design. It comes in four different sizes: 160 x 100 x 50mm 120 x 80 x 50mm 80 x 60 x 40mm 60 x 40 x 30mm Recommended Print Settings…

Order a print of this model

Printables

Kumiko Phone Stand

A minimal phone stand displaying the Mitsukude ( 三つ組手 ) pattern, with a cutout for charging cables. It was designed to be printed on its side without supports, but you will want to have your bridging settings dialed in for the…

Order a print of this model

Printables

Mikrofonklemme für MD441

eine M4x20mm Flachkopfschraube und eine 15x1,5mm Unterlegscheibe werden zusätzlich benötigt. wenn die klemme zu fest bzw zu weit hinten sitzt, einfach BEIDE Teile etwas größer skalieren. ich empfehle jedoch nicht mehr als 0,5%, denn dann…

Order a print of this model

Printables

Very robust Rummikub Stand

My parents have a rummikub game that is almost as old as me, and the stands started giving up. So I slapped together a quick stand. The print is intended multi-material, but you can also just remove the Text model and have the stand print…

Order a print of this model

Printables

Coffee block : Umikot 58mm Short Tab

I model this little Umikot 58mm short tab block because I really love the original stand of the Umikot design and want it to be integrated into the coffee block :D !

Order a print of this model

Printables

Miku Nakano

figurka Miku Nakano z anime The Quintessential Quintuplets

Order a print of this model

Printables

Kitchen bag holder - Drzak mikrotenovych sacku

just kitchen bag holder

Order a print of this model

Printables

Držák externího mikrofonu - vysílačka Matra

Umístění mikrofonu do držáku je díky jednoduchému tvaru možné i za jízdy, za snížených světelných podmínek, v rukavicích, ... Zároveň je věšák konstruován tak, aby bylo možné zmáčknout klíčovací tlačítko i na zavěšeném mikrofonu a nebylo…

Order a print of this model

Printables

10" inch rack mount ear bracket for Mikrotik CRS310 series switch

The switch itself is 1U-sized and even comes with hardware mounts for a 19" rack installation, but the 10" rack mount accessory is extra. With this mount you can utilise one of the included rack mount ear brackets to mount the switch to a…

Order a print of this model

Printables

Hope MIkaelson figurine

Hope Mikaelson from the Vampire Diaries spin off legacies as a figurine as a multicolor 3mf and single color stl

Order a print of this model

Printables

Attack on Titan - Eren and Mikasa love

Attack on Titan, Eren and Mikasa love, 2d wall art

Order a print of this model

Printables

Mikrotik RB5009 / L009 rack mount with hex nuts

Remix of EHY_3dp's model. I didn't have threaded inserts and wanted to use M4 hex nuts instead.

Order a print of this model

Printables

This is Miku

There is nothing I have to say for a tip so just enjoy it

Order a print of this model

Printables

formikarium

model przerobiony z oryginalnego potrzebne będzie plexi 1mm lub 1,5 mm którą należy przykleić silikonem akwarystycznym jeśli jest taka potrzeba czerwona folia którą przyklei się na plexi prawdopodobnie niedługo pojawi się na moim profilu…

Order a print of this model

Printables

ownMade - Rummikub Tile Board

I made a nice Rummikub Tile Board Rummikub Tile Board 360 x 135 x 36 mm

Order a print of this model

Printables

Pupitre support Rummikub

Le support fourni dans certains jeux Rummikub n'étant pas pratique, voici un autre modèle que l'on trouvait dans certaines boites

Order a print of this model

Printables

10″ Rack Shelf for MikroTik RB760

Credit to the original designer of this retention setup, the router clips cleanly into the shelf and is pretty secure. I printed in PLA, but I'd probably recommend PETG or something else capable of handling a little heat inside a rack. I…

Order a print of this model

Printables

Melt Ice Keychain by Mike Bennett Art

Thank you, Mike Bennett, for this creative piece! Spread the word, and get ICE out of our streets. Recommended colors: Black PLA from Protopasta International Orange HTPLA from Protopasta Highfive Blue HTPLA from Protopasta Partly Cloudy…

Order a print of this model

Printables

Mimikyu EX

TCG Mimikyu EX

Order a print of this model

Printables

Ellipse stamp metal souvenir stand (Snow Miku Hokkaido)

Made with Plasticity The stand for a piece of souvenir I got from my trip to Hokkaido. It is an ellipse-shape stamped piece of brass. This one is specifically Snow Miku. I bought the piece from New Chitose airport Snow Miku exhibition on…

Order a print of this model

Printables

Rummikub stand

Order a print of this model

Printables

Fumikage Fan Keychain

Boku No Hero keychain

Order a print of this model

Printables

MikroTik RB951G-2HnD 10" Rack panel

10" Rack panel for MikroTik RB951G-2HnD

Order a print of this model

Printables

Lucky-Kitty Keramiktrinkbrunnen Wasserauslass / Ceramic cat fountain water outlet

Replacement water outlet for the original one, with a bit of downward angle. Due to a new pump with too much power i had guide the water down to stay inside of the fountain. Best would be to use something like PETG due to food safety.

Order a print of this model

Printables

Tray for Rummikub Tiles

We have a very old Rummikub game at home that comes with really flimsy trays. This is a replacement tray for Rummikub tiles of the size 27mm x 19mm x 3.5mm. Special features: The tray has a firm stand. It has flip out/in feet. It has end…

Order a print of this model

Printables

Stackable Tile Stand (Rummikub)

This is a compact, stackable travel stand for tile-based games like Rummikub. I wanted to carry my game in a more compact form when I traveled, and the included tile stands were too big. The model is lightweight, compact, nest into each…

Order a print of this model

Printables

Mikey Mouse Knitted keychain option

Mikey Mouse Knitted keychain option includes

Order a print of this model

Printables

Mikrotik L009/RB5009 10-inch rackmount with M3

I had M3 on hand so I remixed it to use that. Also made three versions 1. 1 HE, same as the orignal 2. 0.66 HE, to cover 2 squares 3. Tiny, is the same height as RB5009. This version is the on in the picture.

Order a print of this model

Printables

Bosch Mikrowave Hook replacement

Fits most microwaves. update: armes on the side where to short uploaded the new stl Please note that some microwave models use a door sensor mechanism to detect whether the door is properly closed. If the hooks are not shaped exactly like…

Order a print of this model

Printables

Wall mount, car mount Mikrotik chateau lte12

На работе возникла идея смоделировать некоторое крепление для Микротика в служебную машину. Главное - оно не должно дребезжать и не должно бесить водителя =) За 16 часов получилось что-то построить, и около 10 часов заняла вся печать.…

Order a print of this model

Printables

Keychain Mikrotik

Простая тестовая моделька. Зазор между стенками 0.2, входит хорошо, не вылетает. Рекомендую при печати использовать "утюжок" или разглаживание верхней поверхности. Фоток нет =)

Order a print of this model

Printables

Rack Mount for Mikrotik RB260GS

Салазки для Mikrotik RB260GS в 10ти дюймовую стойку. Слева вырез для провода питания, справа логотип.

Order a print of this model

Printables

Little Green Army Men : Andor : Karis Nemik

Order a print of this model

Printables

Brick-Style Initial Letter Tag with name - Mike

Do you need a custom name? Leave a comment and I will add a new version. https://www.plainmesh.com

Order a print of this model

Printables

A cristmikah winter diaroma

Order a print of this model

Printables

Miku Hatsune Separated Hair and Body v1(Potatogenic's Edit)

Remixed model from printedobsession's sculpture separated using blender. The Models should auto orient into the correct way to print. Supports should still be used for the hair and body/head, but not the hands/arms. Manual trimming will…

Order a print of this model

Printables

Stacking case for MikroTik hAP and hAX routers

For all of us who use MikroTik hAX and hAP routers in our router labs where we experiment with Recursive statics, OSPF, BGP, and even MPLS, we can now neatly stack our devices so they don't fall all over the place. There are two main…

Order a print of this model

Printables

Mikrofonklemme

Zusätzliche Materialien: 1x Zylinderschraube M3x20 1x Mutter M3

Order a print of this model

Printables

mimikyu estatua

modelo 3d mimikyu pokemon

Order a print of this model

Printables

Scaled down for travel rummikub tiles

I scaled down the size of all parts proportionally to the travel rummikub tiles.

Order a print of this model

Printables

Mikuni TM40/HS40 Carburetor

This is a 3d scan from a Mikuni TM40 or HS40. I believe it came from a harley but not positive. Do something cool with it and share some pics!

Order a print of this model

Printables

Hatsune Miku Keychain

I love Hatsune Miku and thought I should Make this for other Hatsune Miku fans too.

Order a print of this model

Printables

Mikey Mouse

Erstellt von einem Bild

Order a print of this model

Printables

Hydro Handbrake Top Part MIKU (M8 Nut Design)

This is a custom top handle for a hydraulic handbrake witch MIKU and 01 Text, specifically designed to house an M8 nut. The model features a multi-part design, allowing for clean multi-color printing without the need for manual painting…

Order a print of this model

Printables

Mikuni PHH 40 carburetor 3d scan

This is a 3d scan of a Mikuni PHH 40 dual barrel side draft carburetor. I believe the Weber side draft is also a direct drop in replacement as far as the flanges but don't quote me on that. This is one of two carburetors, and doesn't have…

Order a print of this model

Printables

MikroTik wAP bottom cover

I lost bottom case cover for my mikrotik wAP, so i designed new one. In files 3 stl file with different cuts position and no cuts. Tested with wAP AC (first gen), probably suitable for all wAP series access point.

Order a print of this model

Printables

Mike Cho coaster

Super cool

Order a print of this model

Printables

Digimon - Kuzuhamon Miko Mode

Kuzuhamon Miko Mode is a symbol of grace, wisdom, and spiritual enlightenment within the Digital World. From Digimon Ghost Game and Digimon Masters. A Shaman Digimon. It is a form Kuzuhamon takes when it performs Shinto rituals and…

Order a print of this model

Printables

DELTARUNE | Mike Trio

As usual, I recommend printing in your printer’s minimum layer height to preserve the figure’s detail. Any filament type will do. Characters by Toby Fox.

Order a print of this model

Printables

Sanie Św. Mikołaja

Zapraszam do drukowania i polubiania! Let's print!

Order a print of this model

Printables

3D Text Flip (Mike / Sara)

Order a print of this model

Printables

Window/Peeking Mimikyu

I guess everyone knows these window-peeking Pokemon. There were multiple models of many Pokemon species, but not my most favorite, Mimikyu, so I decided to make the model for myself and all Mimikyu lovers! ^^ It's the first version and…

Order a print of this model

Printables

MikroTik hEX DIN Rail Mount Brackets v2

Refresh version of mounting brackets for the MikroTik router (tested on RB750Gr3, hAP lite and hEX Refresh) to mount on a standard 35mm DIN rail. The model is provided as a single STL file. The bracket is not symmetrical, so you will need…

Order a print of this model

Printables

AR9 Charging Handle GForce Jawbone / Foxtrot Mike

GForce Jawbone AR9 / Foxtrot Mike FM-9 / VFM-9 friction fit upgrade for charging handle. Some different designs that are easier to work and clear the picatinny rail for the use of a front site. Making a straight and angled one of each for…

Order a print of this model

Printables

Mikrotik hap ac3 wall mount - remix

This is a remix of the original model by @Vafi . I have made several structural adjustments to improve the overall functionality and fit. Key Changes: Scale: Increased to 101% for better fitment/tolerances. Height Adjustment: Reduced the…

Order a print of this model

Printables

Mimikyu

Bring your favorite Pokémon to life with this Pokémon fanart model! This fan-made 3D model is perfect for fans, collectors, and creators who want a Pokémon figure to 3D print and display. Simply print it, paint it, or keep it as a…

Order a print of this model

Printables

8mm kumiko blocks

I decided to dabble a bit in kumiko, which requires blocks to help cut ends of bits of wood at specific angles. Naturally I printed the various jigs required. Unlike a lot of jigs I didn't combine angles, so each can be set to a required…

Order a print of this model

Printables

Umikot long base 24mm with 12 magnets

changed the 24mm long tab for the famous umikot to fit aliexpress magnet 5x2.6mm also changed qty to 12 for better grip with the basket. added a solidworks file where you can change the mangets qty

Order a print of this model

Printables

Fr. Mike Schmitz quote keychain

just a simple keychain model I've made for a retreat.

Order a print of this model

Printables

suncrest grad 2026 Mikaella

I made this for my Grade 7 graduation.

Order a print of this model

Printables

USB-Mikroskop-Halter

Ersatz für den unzureichenden Halter für das Mikroskop. in meinem Fall ein SUMIKON PX-8085-675 2MP 200x. Nun kann problemlos fokussiert werden ohne dass sich die Halterung verstellt. Die Dateien sind als STP abgelegt, damit sie in jedem…

Order a print of this model

Printables

christmas mikey and minie

adorno navideño con luz ,altura de capa 0.2 boquilla0.4 sin soportes ,velocidad 50mm filamento pla , luz blanca y filamento blanco relleno100%para la bola ,20%para la rosca superior y inferior.esfera de 7cm de diametro

Order a print of this model

Printables

Pokeball Keychain Mimikyu Edition

I made this awesome Modular Pokeball Keychain. This is the Mimikyu edition. Gonna make a lot more in the coming days. You don't need supports to print the shell. It's good as it is. Use the AMS for the colored design. Enjoy. And if you…

Order a print of this model

Printables

Umikot (58mm, Short) Spin Ring with Finger Detent

Remixed to have a detent to spin with index finger

Order a print of this model

Printables

MikroTik CRS305-1G-4S+IN Mount

Allows for mounting of a MikroTik CRS305-1G-4S+IN almost anywhere using double sided sticky tape. The posts of the print go into the bottom of the router and then double sided tape goes on the bottom of the flat piece. Stick it where you…

Order a print of this model

Printables

Umikot 58mm Mechanism and Spin Ring modified to receive M3 HEATSET INSERTS

In this mod, the short Mech is V2 modified to receive 4x m3 heatset inserts. The Spin Ring V2 is modified to receive 1x m3 heatset inserts. This avoids the need to directly thread M3x12 into plastic. Direct-thread M3s are…

Order a print of this model

Printables

MikroTik Power Module Removal Tool

We had over 100 Mikrotiks to change power modules on (seen in the picture). The modules clip into the metal body with small depressable tabs. However, the design is not easy to get the module released. So we made this tool to aid in…

Order a print of this model

Printables

Rummikub Board Holder

My mother volunteers at a senior center. The ladies there are always up for a game of Rummikub. Unfortunately, the holders for the game pieces tend to break easily. Therefore, I designed a simple but more stable version.

Order a print of this model

Printables

Yinmik BLE_YC01 sensor cover (for protection)

Cover to avoid dust and particles inside sensors. Print in TPU to allow easy snap into sensor.

Order a print of this model

Printables

Mikrotik RMK-2/10 Compatible

Mikrotik RMK-2/10 compatible. It allows Mikrotik 10 inch rack router and switches to be mounted side by side in a 19 inch rack.

Order a print of this model

Printables

Mikrotik RMB33G Case

A modern enclosure for this fantastic Mikrotik device with the following features: Very tight geometry. Follows Mikrotik Branding Guidelines. Air ventilation placed where heat is mostly generated. Textured enclosure for less 3d…

Order a print of this model

Printables

Mikasa Ackerman Attack on Titan HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180.04x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

Order a print of this model

Printables

Mike Name Tag

Mike name tag. Part of a greater series. Let us know via DM if you are looking for a specific name. Print Settings Printer Brand: Prusa Printer: i3 MK3 **Rafts:** No Supports: No **Resolution:** 0.16 Infill: 20 **Filament:** Keene Village…

Order a print of this model

Printables

On-Table Microphone Stand for Philips Speechmike

This is just a tabletop microphone stand for the Philips Speechmike. If you are dictating reports with voice recognition using the Speechmike, and you are tired of holding the microphone with your hand… try this stand and free your hand…

Order a print of this model

Printables

Meshtastic Gendemik "DIDDY" T114 Micro Node REMIX

Heltec fixed the “long message” and “Bluetooth disconnect” problem with a new hardware Revision, make sure that you order the updated version to avoid problems!…

Order a print of this model

Printables

Himiko Toga Heart

Himiko was a fair-skinned girl who was prone to blushing and was frequently described as having a pretty face. She had inward-tilting yellow eyes with thin slit-like irises, somewhat resembling those of a cat, and her wide mouth was also…

Order a print of this model