Counting matching models…
I stumbled across this awesomely detailed Millenium Falcon surfing the net one night. I believe it was extracted from a game, as it was in some obscure file format. I've tried my best to convert it here in a couple of file formats. But it…
Alignment pegs guarantee precise positioning during assembly. All components are printed without any support, raft, brim, or infill. Printing at the standard size produces a model with dimensions approximately 131mm wide by 191mm long.…
I printed all the components using a 0.24mm layer height and 50% infill. To address warping issues at the ends, I added helper disks in PrusaSlicer. The parts barly fit on my printplate with 225x225mm The spacing between the left and…
I decided to try my hand at building a working clock for a friend who wanted to gift it to someone they were going to visit. All credit to Vector Design Store UA on Etsy for the SVG. I highly recommend them if you want to build any vector…
A new 3D figurine generated by AI, a Benchy Millenium. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
Needed an extra gift for a friend so designed this and printed it for hes birthday You need support under the cockpit or els it will print fine.
This is a stand for the Lego Millenium Falcon 75105, should work with 7965 too. The supported angles are 10° (standard) and 20°.
This is a remix of the original Model by Marii Nightingale. I used the original model as a reference to recreate it in a Parametric CAD program and export a .step file, as these are easier to edit. Please note that this is modeled after…
Print with supports. A lot of supports are needed to have the floating look of the falcon off of the wall. Underside of the falcon might look a bit rough, but I found it didn't really matter since you couldn't see it.
Combination of Millenium Falcon and Star trek Enterprise 🎨 Support my work and grab some 3D printable files here: https://cults3d.com/en/search?q=ivcemkd 🙌 Thanks for the support — I appreciate it! 😊
Here is a remixed version of my coaster holder. This one was designed to hold stuff Star Wars related or other items. I plan on working on the compartment sizing. This can be printed the same way as the original file. It is also still…
“It's the ship that made the Kessel Run in less than twelve parsecs. I've outrun Imperial starships. Not the local bulk cruisers, mind you, I'm talking about the big Corellian ships now. She's fast enough for you, old man.”
A printed part, that allows fixing a 120 mm enamel sheet metal sign (FMJ) to the milo CNC Mill. Needs the FMJ Mod, Fix with 2 M5 8 or 10 screws and 2 M5 drop in nuts. Requires 2 M3 Heatsinks, fix the badge with 2 M3 * 8 screws.
A large printed piece to cover the continental breakfast. After print you have to mount it, glue it down with some double sided tape, and mill it flat, so to create a proper datum to work on.
Hey visitor, found your favorite film or TV show? Check out the full movie collection here: https://www.printables.com/@WalterSpanu_3005190/collections/2922712 Star Wars–inspired wall plaque featuring the Millennium Falcon in low relief…
I created this copy of the original clamp as an extra guide for my audio- and powercable going to my monitors. Tested them on my Innox IVA MON-07, but the Millenium Desktop Monitor Stand DM3 looks the same.
This model was developed with a focus on geometric precision. Every radar dish, laser cannon, and heat exhaust vent has been scaled to ensure the model looks as good on your desk as it did in the Kessel Run. Technical Specs: Designed…
Tool for removing or installing the piston sleeve in a LaPavoni lever coffee machine (millenium version). Includes a hole for screwdriver/hex key for additional torque. Print settings: Printed in PETG 0.20 mm layer heigth (0.20 mm…
Decided to make a simple wall mount in OnShape for an old Millenium Falcon lego set I've had collecting dust for years on a shelf. Lego Set 75105 This was intended to be a rough draft but it worked well enough that I didn't bother making…
Phone stickers based on the Millenium Falcon from Star Wars, and asteroids modeled after the Atari game Asteroids. I don't like to have a case on my phone, but I do want something to lift the camera lens off of whatever surface I am…
Günstige (e)drum Racks sind für große Menschen oft zu niedrig. Die Erhöhung kann man mit Hilfe von Schlossschrauben auf 4 Höhen einstellen. Unten passt der Gummifuß wieder drauf. Diese Erhöhung habe ich für ein Millenium MPS 850 Set…
"You’ve never heard of the Millennium Falcon?" 🚀✨ This latest neon-inspired design is a tribute to the most legendary ship in sci-fi history—the Millennium Falcon. It may look like a bucket of bolts, but we all know it can outrun Imperial…
A printed part, that allows fixing a 120 mm enamel sheet metal sign (FMJ) to the milo CNC Mill. Needs the FMJ Mod, Fix with 2 M5 8 or 10 screws and 2 M5 drop in nuts. Requires 2 M3 Heatsinks, fix the badge with 2 M3 * 8 screws.
A large printed piece to cover the continental breakfast. After print you have to mount it, glue it down with some double sided tape, and mill it flat, so to create a proper datum to work on.
A Z-Axis wheel for the Milo Millenium Mill. Uses the “Handwheel Handle x2.stl”. Bom: 2 M4 screws - threat needs to be at least 12 mm long. 1 M8 washer or appropriate shim with 8 mm hole in the center 1 M5 Heatset nut for 6.5 mm holes…
Requires PET-G/ASA/ABS print and any tribufilament i.e. PA or Igus materials or just a different material. TPU 95A is required for the bellow. Requires 4 more M5 roll in Nuts, 2 M5 * 12 and 2 M5 * 16 screws, as well as 3 M3 Heatsinks and…
I like designing coasters as they are usually pretty easy and obviously super useful. Being into Star Wars, I decided to design some simple coasters and then decided that I needed a coaster holder…because why not? The Millenium Falcon was…
Recommended: - An FDM Printer - Glue Required: - 2 rolls of different colored filament or 1 roll and paint. Grips and logo are printed separately, if you have a multi material printer I've provided the .blend files (due to how jank…
This is a 10 cm by 7.5cm model of the Millenium Falcon. Easily printable, prints best with support on the underside. Print with the bottom of the ship on the bottom of the bed. Happy flying, Rebels! Print instructions Category: Models…
Stand for millenium falcon model, there are 3 versions - with logo, without logo filled and without logo with the deeper hole, meaning you will save some of the fillament, but not much. I have scaled the original model, so I'm also adding…
A great Wall Art of the Millenium Falcon from Star Wars. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used Flux.1 AI, Copilot and Hotpot
Standard brick size, so it fits better
This is my Millenium Guitar Stand Tool Holder. All the necessary tools at your fingertips … In this version (v6), i have corrected the hook for more efficiency.
You will be surprised at how stubborn of a grouphead sleeve this will be able to remove. (some WD40 left to sit for an hour also never hurt anything) I printed on Prusament PLA with 4 perimeters, and increased temps from 230 to 235 C for…
Damit mein Mikrofon nicht gegen die Wand schlägt, wenn ich den Mikrofonarm weg schwenke.
Concept: Quick print covers for your Atmos II AIO unit. A viking inspired Valknut encircled by runes from Elder Futhark alphabets The runes spell out Valknut and Odin (My understanding is purely based on google lords!!) A Millenium Falcon…
Hey visitor, found your favorite film or TV show? Check out the full movie collection here: https://www.printables.com/@WalterSpanu_3005190/collections/2922712 Star Wars–inspired wall plaque featuring the Millennium Falcon in low relief…
Do you already have the Death Star display stand for your Wave 1 Funko Bitty Pop Star Wars figures and need another stand for Wave 2? Here's a new display stand for your Funko Bitty Pop Star Wars figures: the Millennium Falcon! There are…
https://www.thingiverse.com/thing:4665052 provided a single piece model that was too big to print on Prusa MK3S, so a cut the model using Shapr3D on my iPad and added assembly points, supports, and cross-bars that use M3 screws and nuts.…
I created this copy of the original clamp as an extra guide for my audio- and powercable going to my monitors. Tested them on my Innox IVA MON-07, but the Millenium Desktop Monitor Stand DM3 looks the same.
This model was developed with a focus on geometric precision. Every radar dish, laser cannon, and heat exhaust vent has been scaled to ensure the model looks as good on your desk as it did in the Kessel Run. Technical Specs: Designed…
3D Model Description – Alesis Drumstick Holder (37 mm Tube) 3D‑printed drumstick holder compatible with Alesis racks, designed to mount securely on a 37 mm tube. This holder can store up to 4 drumsticks, giving you quick and easy access…
Trichter für ein Sieb der post millenium Brühgruppe mit 52 mm. Der Trichter liegt über der Wölbung auf. Category: Household
This is a laser cuttable stand for the Lego 75192 Millenium Falcon set. I used 4.2mm high density MDF but you can use anything you want. Adjust the gaps to create a snug fit for the material thickness you are using. The files contain 2…
Here's some Star Wars day fun. Add a little style with a Millenium Falcon inspired spool holder setup! RepRack, RepBox, and RepWinder Compatible. May the fourth be with you! Check out the X-Wing Style Rack Stand too! Bill of Materials…
Ok I have managed to get the Falcon created by Jace to print, I am not sure why - but for some reason (possibly the file size of 103MB) it is not showing in the preview images. However it should be in the file list. I will update this…
Microphone cable clips for Millenium MA-2040 and structurally identical boom arm (cable: 6mm, arm: 10*10mm)
Cookie cutter based on the millenium falcon from star wars. 2 models available. Large ~120mm (~5") in length and small ~80mm (~3")
This is a hanging ornament remix of Glitch's Millenium Falcon . It's perfect for the rear-view mirror, Christmas tree, etc. Print instructions The print in the cover photo was done on a Prusa i3 MK2 MMU as follows: mf_top_combined.stl…
This is my take on an organizer to fit the three Millennium Series Games of Chronicles of Crime into one box. This insert will fit: Chronicles of crime 1400 Chronicles of crime 1900 Chronicles of crime 2400 Chronicles of Time (KE) All in…
Put your Millenium under highlight ;) simple base for the ref 75257 simple to print, no support, Infill 15% PLA, ABS , whatever your want except TPU ;)
Do you love Star Wars and Star Trek but cannot decide which ship you want to print. Why not both at the same time with the Millenium Enterprise I was shown a drawing by a good friend and I knew I had to make it. You can see the drawing…
If you like me have a Eureka Mignon single dose grinder and a La Pavoni coffee machine, you'll know that the metal doser is too big for the post-millenium 51mm portafilter. The doser adapter has been tested and works flawlessly, the…
This dosing funnel attaches perfecty to my original portafilter from La Pavoni, doesn't fall when upside down, I can hear the click when attaches to the portafilter, very well adjusted for my printer/filament. I was considering to add…
A TCG token modeled after the Millennium Puzzle from the "Yu-Gi-Oh" series. I use them to keep track of certain actions during the game. For printing, I recommend doing a filament swap midway. Try printing a few in the same bed to save on…
This model is part of a model pack of office supplies. Collaborated with @shaludavid_1347503 This model is used as a pencil holder for classrooms and offices. Teachers can use it to see how many pencils are missing and make sure all are…
Fan of the Millenium Falcon, I designed this keychain with Fusion 360. It is 6.5 mm height and 45 mm lenght. As you can see I mixed white and black filaments. For those who wants to edit this project you will find the .f3d Autodesk Fusion…
E3 version has a slightly weaker mount but should fit 220x220 beds. (rotate the model 45 degrees) Low quality because it's an STL edit, I made it to send to a friend who has the drone and likes star wars very much. If it works for you…
Fan of the Millenium Falcon, I've already designed this keychain but this one include a shopping cart token . It is 6.5 mm height and 45 mm lenght. The print is in 3 parts : millenium falcon keychain token corresponding to 1 euro coin to…
Decken/ Wandleuchte im Style des Millenium Falken aus Star Wars. Der Ring wird auf das Oberteil aufgeklebt. Der Deckel hat eine Durchführung für Elektrik 30mm sowie 4x5 mm Löcher, um die Lampe zu montieren. Dieser wird dann mittels…
This model is designed specifically fit the size and weight of the millenium puzzle I printed in an elegant way. The base will need to be glued to the hanger part. The Millenium Puzzle is https://www.thingiverse.com/thing:5723661 Don't…
Simple stand for model of Millenium Falcon created by GOODESIGN from website Fab365. https://fab365.net/items/277 stand is 115 mm tall and useable for rear left pocket for landing gear. Model is rotated 5 degrees down in front direction…
