64 models
This replacement coffee maker lid was designed to replace a broken original. It fits perfectly, as shown in the picture. The pictured prototype is printed in PLA, but I expect to print the final verion in PETG for improved heat…
My original Moccamaster scoop broke so I designed a printable version. It requires support for the handle.
I wanted to organise all our office coffee equipment and accessories, but I couldn't find any good existing solution. So I made my own using gridfinity system! I will be adding new models as I finish printing them so I know they are ready…
Version : 1.2. The connection holes on both parts are now increased from DIA 1.8 mm to 1.95 mm. It is reported several times as the holes were too tight. Version : 1.1. The connection holes on both parts are now hidden, when the lid is…
Snap on attachment to have a working hinge on the coffee pot of a technivorm / moccamaster coffee machine. Attach to the existing handle when you break off the not-working hinge parts. Printed with PLA to test the workings, but printing…
Designed to have a higher inner space since the original lid would lie on the outlet arm and would therefore bend by bei
The model has two main added features - this lid has ventilation holes on the sides and top which avoids condensation build up and has a hinged lid , as to not remove the whole lid each time water is being added. The hinge is modeled to…
Just a simple filter holder to suit your moccamaster. .stp file included Print Settings Printer: Tevo Tarrantula Rafts: No Supports: No Resolution: 0,2 Infill: 100 Category: Kitchen & Dining
Might need support to print properly
Moccamaster Switch Snap-Fit Replacement This is a replacement switch cap for the Moccamaster coffee maker. It’s modeled to match the original part and tested for a snug snap-fit —once installed, it stays securely in place and functions…
I thought my Moccamaster coffee maker missed a little something on the front so i made this little grill to spice it up a little. It has a friction fit and slides right in.
Also fits the Douwe Egberts coffeemaker
This filter holder enables the use of a pour over set up with the moccamaster drip coffee machine. The holder centres the filter underneath the hot water dripper and is usable with different types of pour over holder. Ive used it…
This is a shower screen for the Technivorm Moccamaster Cup-One 1-cup coffee maker. It distributes the hot water for even wetting of the coffee in the filter. Simply place it on the top of the filter holder before brewing (it takes a…
10 minute job for my moccamaster. Still fits on today ( 3 months ) but not really good fit. Print instructions Infill 100% Support No Material PLA
This is a filter holder for Moccamaster coffee machine. My friend requested one. No screws are needed. Print tested with PLA, gyroid 10% infill (i tested it that way). Print it the way it is laid in STL, no suports are needed (brim might…
Our ten year old Technivorm Moccamaster Clubline coffee maker is still working great but the drip-stop tab tends to drop down by itself causing overflow in the filter. This is a plug that will keep it in the open position. If you want to…
The coffee pot at work broke, so instead of buying a completely new machine I made this replacement part for one of the hinge fins. Held for 3 years. It's all friction fitted, no glue or other fastener required. Printed with a Prusa i3…
Printing data : PETG 0.4 nozzle 0.2 layers 3 walls 25% cubic infill. Enjoy your print and coffee :-)
Supports are required. I printed it with high layer height cause I needed it urgently but for accurate result I recommend low layer height (0.1-0.15mm) and also adding fuzzy skin feature inside the little outlined box thingy makes it…
This is a cup tray for the Technivorm Moccamaster Cup-One 1-cup coffee maker. The silly little cup/drip tray that comes with the coffee maker has a circular recess that is clearly designed for the cup included with the machine, and…
Replacement switch cover for the Technivorm Moccamaster to fit off-the-shelf switches. Technivorm wanted $60 plus shipping ($85) to fix at their center instead of sending me replacement switches so I made my own fix. This model should…
Quick print ~ 1 hour You will need 4 small rubber feet , up to 8 mm ⌀ in width. Rest of the model is snaped together with self-locking parts. No screw, glue or adhesive needed.
Because my counter top was not level, I was getting uneven extractions when using a shower head insert on my Moccamaster. I designed these in several sizes from the 4.5mm-9.5mm. Print with TPU.
the Moccamaster Cup One is a coffee maker from Moccamaster: https://www.moccamaster.eu/coffeemachines/cup-one It has a cup holder https://www.moccamaster.eu/cupholder-cup-one that is too small for my cups, So I cloned it and made it…
A Mocca Pot is a beautiful device to brew a good coffee. Sometimes it may be messy to fill in the coffee grounds and therefore this openscad model will provide you: infill help / funnel tamper to gently even out the coffee Mocca Pot…
I purchased my Technivorm Moccamaster Cup One used and it not come with a drip tray. I also believe the original drip tray does not accommodate larger diameter cups/mugs. This tray will fit most if not all container. A small lip on the…
Moccamaster drip stop that keeps the tab slightly open (7 mm height) to let it pour through slowly
Replacement foot for a Technivorm Moccamaster. I printed mine in solid TPU. It is a bit stiffer than the original and not as grippy, but fits perfectly.
Printed with the large surface down, with supports for the little ring
To make your Moccamaster lid more stable and your life easyer :-)
Counter space is at a premium in our kitchen, so having open boxes of filters around was not an option. We used to stack the filters on any non-wet surface that was not in use. To solve this problem, we created a stand to hold the two…
Somehow the plastic SCALE indicator lens/cover broke on my Moccamaster coffee maker, and so there was just a square hole left. I wanted to fill it with something translucent, so I designed this snap-in lens/cover, and printed it in clear…
This mod allows you to brew your coffee directly into a mug. I typically only drink one cup of coffee a day, so brewing into the carafe is just an extra step and an extra dish to wash. There are two pieces: the spacer that centers your…
You do not need to buy a new can if the hinge of the can breaks. You need to remove broken side of the cal hinge first. This part is recommended to be printed out of ABS due the heat tolerance. PETG will also do. Standard PLA cant be…
I am happy with my Moccamaster coffee brewer but the tiny drip tray always annoyed me. My coffee mugs had to balance on it and never did fit in the well. To fix that, I made a larger version of the tray to take the place of the original.…
After buying a Moccamaster KBT I realized sometimes I don't need to brew a full pot and wanted the option to use another carafe, like a large insulated thermos to brew into. The piece fits right in and presses the white button the carafe…
The lid on my MoccaMaster coffee brewer broke, made a stronger one, and with a more fun design. Print Settings Printer: printed with a FDM printer Rafts: Yes Supports: Yes Infill: 20-35 Notes: Printed in PLA and PETG with 0,2 mm layers…
Original broke down and I needed this. Printed with PAHT-CF (first print with this filament, so learning).
Custom 'MoccaMaster Cup-One' Holder for YETI Rambler Lowball. Made for the non-stackable / old version of the YETI Lowball Rambler 295ml / 10oz. Will probably fit the new / stackable 'lowball’ & 'stackable mug' with handle (both 295ml /…
This 3D-printed attachment holder fits snugly to the side of the Moccamaster KBT coffee maker, providing a dedicated place to hold whichever lid is not in use. I created this design to solve the problem of not knowing where to place the…
Replacement handle for the Moccamaster, modeled to match the original fit and ergonomics. Category: Kitchen & Dining
Coffee scoop for full Moccamaster pan
My old dripstop disintegrated at the bottom and no longer worked. That's why I designed this drip stop. The old dripstop is attached with a split pin. This can easily be replaced with an M3 screw. As it can get warm at the contact point,…
The clear plastic cover for the red status LED on our Technivorm MoccaMaster broke. I modeled and printed a replacement part in clear polycarbonate. It is odd shaped because it grips onto an LED that behind the cover is shaped like a…
My Moccamaster always had a problem with the drop stop, the coffee always runs along the drop stop lever and on to the lid of the coffee pot. First cup always resulted in coffee on the table and the coffee continue to drive from the lever…
The Moccamster Cup-One coffee maker uses its own special-size “No.1” filters that aren't commonly found. The super-common Melitta No.2 filters work fine in the machine, but are a little too large, and need to be folded over a bit to make…
I wanted the ability to hand brew a bigger pot of coffee. Since I already have a Moccamaster I designed a new lid that are fitted with a filter holder. Fits Chemex and v60 filters. Size: 15,5 cm diameter. Not recommended to use PLA, use a…
Replacement Moccamaster KBGT carafe plate. This model features (x2) cutouts for 2x6mm magnets for various mounts.
Wanted a place to store filters under the Moccamaster.
A 16oz Yeti cup mount for a TechniVorm Moccamaster KBGT. This model uses 2x6mm magnets to align with my carafe plate.
Mixing pin holder for the Moccamaster Thermos can pin. It's annoying to have it laying around rolling of the brewer, so I made this small holder in FreeCAD. First thing post! Print Settings Printer Brand: Prusa Printer: i3 MK2S Supports:…
Nothing fancy with this folks, just a Drip-Stop-Lever-Stopper to put into the filter-coffee-grind-holder-thingy of a newer moccamaster (newer than 10 years), a remix from humebeam's model. I just measured the available hole beneath the…
i have removed the holes on the models.
Picked up a KM5 grinder without a lid and knocked one out real quick.
The Melitta No 4 or Melitta 102 filters need to be aligned at the red line in the picture. The No2 filters can be aligned at the provided lip on the top. Just print it as you like, i added enough tolerances to print on most settings (i…
Base for Rancilo Rocky coffee grinder to place and hold your Moccamaster filter basket while grinding your coffee beans. The two pieces are glued together from behind. Mine fit snuggly and is still easy to remove when you need to clean…
I wanted my moccamaster to look a little cooler with some black and wood. The wood I used is offcuts like these: https://www.biltema.se/bygg/farg/maleriverktyg/fargblandare/trastickor-300-st-2000043283 You will need to cut them to…
I printed this with PCTG-filament and I sliced the model in half since my printer couldn't print this in one piece. ps. The white in the pictures is glue.
Supports are required. I printed it with high layer height cause I needed it urgently but for accurate result I recommend low layer height (0.1-0.15mm) and also adding fuzzy skin feature inside the little outlined box thingy makes it…
Replacement Moccamaster KBGT carafe plate. This model features (x2) cutouts for 2x6mm magnets for various mounts.
A 16oz Yeti cup mount for a TechniVorm Moccamaster KBGT. This model uses 2x6mm magnets to align with my carafe plate.
My original Moccamaster scoop broke so I designed a printable version. It requires support for the handle.
