Counting matching models…
This is a 3d printed duck that I designed. It prints very well and quick. I used a black marker for the eyes. And a brown marker for the bill. This adds a final touch. No supports
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
3 to 30 mm visual guide design to make it easier to 3D model and design your creations without the need for digital calipers !
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
Students design and 3D print their school building in TinkerCAD, learning math, measurement, and modeling through teamwork and the Blum & Leiss cycle. A hands-on STEAM learning project!
Print approx. €3.85–€4.70 excl. taxPreliminary estimate for one variant
Fully printable and customizable roller press for various usage: Papercraft Baking Candle making from wax Pottery making from ceramic clay and others that You find out ;-) Design, make and share Your own rollers design/structure. Basic…
Important note: Multiboard now includes official STEP files, I recommend to use those when creating your own models in CAD software: https://www.multiboard.io/parts-library/remixing Description: This is not intended to be printed…
This is the 3D Modeling ToolKit for JSAUX ModCase of ASUS ROG Ally X. You can design accessories for ModCase of ROG Ally X. The mount structure of Ally X one share the same design of Steam Deck one. So you can basically use the existing…
This an izakaya (japanese restaurant). All the food props come from the japanese society called Re-ment(from the izakaya model box) It's a display diorama with with all the furnitures and walls. All models ar glued together. For a full…
These tools are designed to be used for adding screws, nuts and magnets to Tinkercad creations. These are designed to be imported into Tinkercad and then converted into holes. 6mm Magnet - Rear Push.stl Press fit 6mm diameter magnet which…
A simple model to help my daughter making modeling clay balls! Steps: Put a modeling clay sausage (about 1,0-1,5cm diameter) on the bottom part Place the top part Go back and forth with the top part Open Pick your clay balls!
Summary continued This activity picks up where Transcription leaves off. We will assume that RNA polymerase has already created the mRNA transcript and the mRNA has been processed (addition of the 5’ cap, polyA tail and removal of…
Scratching clay modeling stick for sculpting. This model is tool for scratching the clay when you are working with it.
This is NOT a baseplate. This is a tile for filing in empty spots in your gridfinity baseplates or for using in cad software like tinkercad to quickly make a custom tile. Category: Organization
I've designed a modular storage system for my paints. It can be used for 10ml, 17ml and 23 ml bottles. I has 3 different hights of bases and 3 types of holders. All can be connected with a snap in system. There are also raisers in case a…
Two piece modeling square, very tight fit. Can be glued for a permanent square or left two piece and assembled for use. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 120 Infill: 80 Filament:…
Quick cat ear print for sculptures, cosplays, etc. I haven't printed it yet, so I don't have any tips to print, unfortunately. Feel free to remix! Let me know if you print, I would love feedback:) To make a pair, simply duplicate and flip…
I thought I would share this to help those starting out with a simple pop in corner piece. Tinkercad.com (as far as I know) doesn't have a way to complete open 45 degree corners. Prints upside down if using as a stand alone model. Looking…
Oil paint palette and template for cutting the cardboard sheet to be placed on top of the palette. Four No. silicone feet have been fixed to the underside to prevent slipping. It suits a 5 cm metal mixing palette.
My version uses metal hardware for better durability. You'll need 2 each 3 mm brass inserts, 3 mm x 20 mm threaded rods 3 mm nuts. I printed in it in PLA with 20 mm layer height.
Church model, I printed one with 4 shell layers for a better feel but didn't slow the first layer down enough. Most likely will need to scale up and rotate the print.
FreeCAD project file on GitHub: github.com/…/freecad-course .
I watched a tutorial on hard-surface modeling and this is the strange result. It could have 3 Levels for remixing: Level 1: Make it have your logo Level 2: Make it a water bottle! Level 3: This 1 would be majorly hard. So hard maybe it…
40 to 60 mm visual guide design to make it easier to 3D model and design your creations without the need for digital calipers !
A handy physical reference to have on your desk while modeling. All numbers in mm The lowest clearance slider might be permanently stuck. This is to be expected, as that low a clearance is generally too little for reliable movement.…
All number in mm. Modeling Helper - Clearances, Chamfers, Fillets:
Textured roller with two variants with a heart motif, suitable for creating with polymer and other modeling clays. I designed the motif in graphic editor and I created the file for printing completely in blender. The patterns are rather…
Single bed model for architectural scale modeling; accurately proportioned and lifelike to create a realistic atmosphere.
Double bed model for architectural scale modeling; accurately proportioned and lifelike to create a realistic atmosphere
Oil paint palette and template for cutting the cardboard sheet to be placed on top of the palette. Four No. silicone feet have been fixed to the underside to prevent slipping. It suits a 5 cm metal mixing palette.
A simple model to help my daughter making modeling clay balls! Steps: Put a modeling clay sausage (about 1,0-1,5cm diameter) on the bottom part Place the top part Go back and forth with the top part Open Pick your clay balls!
Design clean and professional railings in seconds with this set of ready-to-use modeling templates. Created for speed and flexibility, these templates allow you to quickly adjust size, spacing, and style to fit your project…
Scratching clay modeling stick for sculpting. This model is tool for scratching the clay when you are working with it.
This is the 3D Modeling ToolKit for JSAUX ModCase of ASUS ROG Ally X. You can design accessories for ModCase of ROG Ally X. The mount structure of Ally X one share the same design of Steam Deck one. So you can basically use the existing…
M80M Flux speaker podiums and podium modeling rings
40 to 60 mm visual guide design to make it easier to 3D model and design your creations without the need for digital calipers !
Multiconnect is a generic system to hang things to your wall or any board (like Multiboard or Honeycomb). Those files here should only be used for modeling, allowing you to create any variation of multiconnect you want. This is version 2…
Tower for miniature painting and modeling. There are 2 models: one standing on some rocks and the other is just the tower. I printed them with PLA and no support. For the tower without the rocks use a brim for stability and adhesion. Have…
The purpose of this model is to help you design your own models. I have an issue when I was trying new models that I draw and used my mounted honeycomb on my wall to test the fit because I can't access the back of the honeycomb it was not…
This is the official 3D Modeling ToolKit for the JSAUX ModCase for ASUS ROG Ally（PC0119） . With this toolkit, you can easily design custom accessories for the ModCase, unleashing your creativity. Download the STL files to start 3D…
Design designed exclusively to facilitate the creation of models where this plate fits
Quick little test block I made, perfect for testing/learning tools. Or even trying new angles
I made this to adapt the O4 Air Unit Pro to the 🍀Clover Cage 🍀 The worlds first heavy duty, hard mounting, highly modular VTX Camera cage with an accompanying line of drones and mounting files to adapt the system to your RC Planes, cars…
The parts that print vertically are narrow and should be printed with a brim. The file name reminds you to do so. The rest of the parts do not need a brim. The poking tool has a small support under the sharp end that can be snapped off…
A set of mini sieves with 1.5mm, 2mm, and 2,5mm holes. Easy to use when building diorama's. Small bucket of 2x4 cm for more control of the area when spreading stones/rocks/sand.
My desk is a mess. There's no way I can fit a proper wet palette amidst the junk, so I made a small one designed to use an ordinary kitchen sponge.
A small connector on my Vox VT20x Modeling Amp's power supply in broke. I contacted Vox and found out that this is a proprietary jack so I just took 20 minutes to model it. If you have any issues printing this, feel free to message me.…
Stojan na modelářské barvičky o pruměru 24 mm. / Stand for modeling paints with a diameter of 24 mm.
Nothing special here, just a simple little surface modeling planter that I designed. I was working through a design and I stumbled upon this shape. I thought it was a cool shape, and I then rendered it in a Jade material. I was…
Blackbird made for schoolproject using surface modeling, it isnt 100% accurate but its close. Probably going to make a stand for it after my exams.
Measurements taken by hand, a tolerance margin to allow for the creation of a case for the PhilipsXPrintables contest & for concrete modeling supports or enclosures (waiting for a working printer and time!) .Step = BowTie Case for hc3510…
pues he usado una IA para poder duplicar el esqueleto de un juego para poder imprimirlo tras sacar 4 fotos al dinosaurio la IA me ha generado este stl. el juego en cuestión es para cubrir el esqueleto con plastilina, a fin de recrear la…
he usado una IA para poder duplicar el esqueleto de un juego para poder imprimirlo tras sacar 4 fotos al dinosaurio la IA me ha generado este stl. el juego en cuestión es para cubrir el esqueleto con plastilina, a fin de recrear la piel…
He usado una IA para poder duplicar el esqueleto de un juego para poder imprimirlo tras sacar 4 fotos al dinosaurio la IA me ha generado este stl. el juego en cuestión es para cubrir el esqueleto con plastilina, a fin de recrear la piel…
He usado una IA para poder duplicar el esqueleto de un juego para poder imprimirlo tras sacar 4 fotos al dinosaurio la IA me ha generado este stl. el juego en cuestión es para cubrir el esqueleto con plastilina, a fin de recrear la piel…
Multi - Diameter Launch Tower System. This is a Tower launcher Head I developed for a camera tripod I was given. It has a center open zone or tube suitable for piston usage. The “tripod head assembly” consists of usually three (3) of the…
Educators teaching in the sometimes abstract world of 3D modeling may find these physical models helpful! In the exercises found in Motion implied through modeling at newMediaWiki , our students learn that “extrusions are shapes moving…
This model is shared here in Fusion Access this model alongside printed versions of the primitive solids for beginning-level Fusion instruction. Autodesk Fusion is unusual in the 3D modeling world because it combines so many different…
EN | Remodeling timetable This school schedule is 100% re-arrangeable, you can take the pieces out at any time and straighten them according to the new arrangement of timetable without having to cross out or erase anything. Instructions…
Printable cap for modeling scalpel. Compatible with scalpels, using blades 8 mm width and 0,5 mm thickness
the one is used is https://ar.aliexpress.com/item/1005006247905071.html?spm=a2g0o.order_list.order_list_main.371.73151802eJD85X&gatewayAdapt=glo2ara
🎨 Modular Palette & Modeling Knife Set – Create, Mix & Sculpt! One handle, endless possibilities! This modular set features 6 interchangeable blades for painting, mixing, sculpting, and texturing. Perfect for artists, model makers, and…
Several shapes of cookie cutters for dough or modeling clay. You can change the size as you like.
A handy physical reference to have on your desk while modeling. All numbers in mm The lowest clearance slider might be permanently stuck. This is to be expected, as that low a clearance is generally too little for reliable movement.…
All number in mm. Modeling Helper - Clearances, Chamfers, Fillets:
Textured roller with two variants with a heart motif, suitable for creating with polymer and other modeling clays. I designed the motif in graphic editor and I created the file for printing completely in blender. The patterns are rather…
Single bed model for architectural scale modeling; accurately proportioned and lifelike to create a realistic atmosphere.
Double bed model for architectural scale modeling; accurately proportioned and lifelike to create a realistic atmosphere
Professional Engineering meets DIY Workshops. This high-performance cyclone separator was designed using Siemens NX advanced surface modeling to ensure maximum airflow efficiency and particle separation. Whether you are using a vacuum…
Design clean and professional railings in seconds with this set of ready-to-use modeling templates. Created for speed and flexibility, these templates allow you to quickly adjust size, spacing, and style to fit your project…
2 simple models of the 21A TEZUO Switches from Out of Darts. Makes it easier to model these in while designing. Includes the "button" switch, and the "long roller" switch. Out of Darts
Molecular modelling fridge magnet set. Molecules are groups of atoms bonded together, ranging between the small, such as molecular hydrogen with just two atoms, or the massive, such as DNA containing billions of atoms! Chemistry modelling…
Straight connector for jlangholzj "Exhaust Modeling Kit" Same 2.5 diameter, same index marks. Added to rest of the files to the "other files" section. It is a .zip archive of the original kit this was remixed from. Print Settings Printer…
I use these 2.1x5.5mm DC Power Jack Plug Connectors in a variety of things so modeled this to help with plans & designs. Here is an affiliate link to the batch of connectors I use: https://amzn.to/395r5zi I'm attaching it in STL format…
The grip on my modeling blade was disintegrating after years of use, so I decided to replace it. Mine is a generic one, you may have to adjust the size of the model. I have made two variants, one with holes and one with bumps, choose the…
Ender 3 / Aquila Frame Rails for Sizing and Modeling This includes all the separate rails in their correct locations and with correct measurements. I only included holes for the X-Rail Member. It also includes a complete stl with all the…
Basic steps Roughly, we will be following these steps: Find an SVG image that you want to turn into a cookie cutter Use a simple app to turn the image into a 3D object Set some settings in your slicer to create a cookie cutter I will walk…
This an izakaya (japanese restaurant). All the food props come from the japanese society called Re-ment(from the izakaya model box) It's a display diorama with with all the furnitures and walls. All models ar glued together.
I created this 3D mockup to aid me in creating a print box to hold this PCB. I designed this model in SketchUp, and I'm providing the editable source SketchUp file here. The box I designed to hold this card is in use on my LowRider v3…
For modeling DIY PCB / Electronics — 4-wire and 6-wire quick connects (mocked up 3D models). This was made in SketchUp. Source file attached. These were used in the creation of: For modeling DIY CNC Plasma: MESA Electronics THCAD2 (PCB…
Sharpie Marker to help with 3D modeling work. Both STL and SketchUp file provided.
![Tower miniature modeling [no support]](https://media.printables.com/media/prints/1041498/images/7896431_d7a3a928-764b-44dd-8997-5b5cf5490775_f850c4dc-5570-46b3-b6ed-8745741bf6e3/tower_single.jpg)
