Counting matching models…
The included 'gears' that came with my DIY blind motors weren't doing a great job of moving my specific blinds, so I designed this gear to suit. The blind motor kit is a Moeshouse CM-LS DIY Smart Motorized Chain Roller Blinds setup that…
Update 10.08.2023: Updated version with tooth which are more stable than the original one. Have you ever had the issue that the thermostat adapter was broken? Yes, it happens quite often. Therefore I created a model which can be used to…
Simple remix (stretch Z\cut bottom) of an Aqara wall mount by Jujumo on Thingiverse to fit my Moes Wireless Scene Switch ESW-0ZAA-EU. Should be the same to Tuya 4-button switch and other similar models.
[PL] Moja interpretacja (remix) nakładki na klapkę baterii do popularnych głowic termostatycznych Tuya/Moes. Model został wykonany od podstaw, metodą prób i błędów dobrałem idealną średnicę wewnętrzną i kształt wycięcia na przyciski.…
Elevate your MOES smart switch with a wall mount that matches its performance—this clever and modern wall mount. Specially designed to accommodate this intelligent switch, this wall mount offers easy and secure installation. Its sleek and…
One of the lugs holding the battery compartment cover broke off so I flattened the broken surface, drilled a couple tiny holes for alignment and better adhesion, printed the missing part, and attached it with superglue. I'm including both…
Adaptador para mecanismos como termostatos, Interruptores o conmutadores inteligentes con o sin Wi-Fi, diseñado para termostato de calefacción Moes de base 86x86mm, apto también para Interruptores o conmutadores. Hay dos versiones, simple…
I made these markers for a friend who has a vegetable garden. All credit goes to the original maker: Miranda. I printed these with 15% infill and used PETG. Layer height 0.2
A simple set of vegetables signs (in dutch) for my wife's vegetable garden. Signs can be glued to the sticks and inserted into the soil!
Wall mount for Moes (or rebrended) 4 gang zigbee scene switch. For holding the switch in place, use 2 10x2mm magnets
This inline smart switch case is designed to house the Moes Dimmer Module (MS-105Z) , providing an easy and safe way to add a smart switch or dimmer without the need for in-wall installation. The module is mounted to the 3D printed case…
The size is designed to fit together with the rear sensor bracket Moes Sensor: https://s.click.aliexpress.com/e/_Dkd1OpB
This is an alternative casing for the Moes door and window sensor. The original casing was unfortunately too tall and didn’t fit into my window frame, so I developed a slimmer solution that fits perfectly. You can find more information…
This was made to allow me to wall mount my Moes Smart Zigbee dimmer. Im using 4.2x13mm screws to mount it to the frame. Join our Discord server: https://discord.gg/JzRWzayqMQ
This 3D-printed wall mount is designed to securely house the Moes ZigBee RF433 Smart Curtain Module within a standard European flush-mounted electrical box. It offers a clean and integrated installation. 🔧 Features Three-Part Design :…
I ordered several of them for HA integration but needed to identify them (battery swap). So here is a simple badge to identify MOES ZSS-S01-TH zigbee temperature sensor - to be glued on the front face. Printed in PETG, 0.2mm, no support -…
The wall boxes in my house are too shallow, and the screw posts inside the back box protrude into the space occupied by smart switches. I wasn’t comfortable modifying the housing of the smart switch or forcing the wiring into the limited…
This is wall mount for wireless button with 50mm diameter. Buttons like this exist for 433 MHz radio and for ZigBee.
An impact on my TRV broke one of the internal battery cover clips which meant it would no longer stay in place. I design this as a stop gap solution until I can replace it. Simply slide it over the top and ensure that the clips engage…
Repair kit for thermostatic valve Moes BRT-100-TRV. The repair kit can be used when the locking pins in the body of the TRV are broken. The part utilizes the conical shape of the TRV body and at the same time strengthens the attachment of…
Moes BHT6 thermostat adapter
Initially, I bought a cheap motor for curtains that can be mounted onto the rod directly: https://www.aliexpress.com/item/1005007993651738.html The advantages of this purchase were the low cost, Zigbee 3.0 support, readiness to be used…
moes switch cover for 4Gang 2Way Wall Switch (2x2 Layout) This model is designed to cover the extra space left when replacing a 2x2 switch layout with a 1x4 switch. This photo is a photo of the wall switch that I used.
Suport to hold a Moes 4 button switch on a Honeycomb System. Need a hot melt net M3 x 3 x 4,5 and a screw M3 x 6
This is a holder/adapter for the Tuya TS0044 Zigbee smart switch (often branded as Moes and others) that allows you to place it neatly over a UK light switch - similar to a lot of the offerings available for Hue dimmers. The TS0044 is…
This is a wall mount for the Tuya TS0044 Zigbee smart switch with screw holes. Fix to the wall, remove the TS0044 back cover, then slot onto this. Easy and quick fitment and removal. This is an original creation, I hope you enjoy it :)…
If your thermostat has little space or requires external installation, use this model.
Printed in PLA with tree supports (they may or may not be necessary) with the hole facing upwards. This works on ball chains of the same dimensions as the original, I just couldn't for the life of me get that one to fit onto the metal bar…
Stand V2 for the MOES Wireless Scene Switch. This updated version features reinforced feet for improved stability and grip, ensuring the stand stays firmly in place on any flat surface. The geometry has been refined for better weight…
As I added more and more zigbee controlled lights and things, I was thinking about changing all the switches in the house for smart switches from Niko. Unfortunately, these are quite expensive, so I was searching for a cheaper…
A minimalist mount for attaching a MOES wireless switch to a refrigerator door. The magnets used are two 20x6x1.5mm neodymium magnets. The mount is attached to the switch with double-sided tape and self-adhesive velvet. Print it as you wish
i downloaded it once from printables but cant find it anymore if you are the owner of the model pls contact me and i take it offline asap
Een bordje dat je in de grond kan steken en er iets opschrijven om te onthouden welke plant het is.
This is a bottom piece for the Aqara/Moes Scene Switch that can be put atop the standard european switch hole. Print from PETG, it's much more flame resistant than PLA. Supportless.
The replacement is designed so that it can be mounted without further destruction of the TRV and still provides access to the batteries. I printed mine in PETG, ABS would be better of course but the temps on the TRV should never be so…
Moes Smart Dimmer Switch: https://moeshouse.com/products/us-zigbee-dimmer-switch
Stand for MOES Wireless Scene Switch Support: PLA or PETG Print time: 2h or 4h (depending on the printer)
Remix of the model from powerscripter, nice model but need to be printed in PETG. My Remix can be printed in ABS
My window frame was a bit too small to mount the motor on it (the blinds would crash into it) so I created this simple plate to move it away from the path of the blinds. Also, my pull cord was on the side of the moving window, so I made…
I resized some premade models of picture frames to match the MOES controller size, to add some style and uniqueness to the smarthome controller. This is set 1 and I'll be crafting more in the future. My MOES controllers are the standard…
![[Dutch] Moestuin bordjes (signs for vegetable garden)](https://media.printables.com/media/prints/153971/images/1460524_2081af12-18d4-424f-86ea-c5294140a6c4/signal-2022-03-28-18-49-02-071.jpg)
