Counting matching models…
A model of a screw compressor at 1:1 scale for pressurizing air to 10bar. Made as a bachelor thesis. See pictures for assembly. Hardware: 8x M8x35mm bolts 8x M8 washers 8x M8 nuts 14x M5x20mm bolts 14x M5 washers 6x M3x10mm bolts 6x M3…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
Replacement whell for air compressor
Print approx. €5.43–€6.63 excl. taxPreliminary estimate for one variant
A screw compressor i made to see if something like this could work. I designed it when Covid started and there was a shortage of ventilators. So it was an attempt to maybe help in some way. The gaps between the layers prevented a decent…
Print approx. €2.24–€2.74 excl. taxPreliminary estimate for PETGSource material: PET
I needed to connect the compressor to a standard garden hose in order to be able to blow out my sprinkler system. The quickest way was to sketch a connector and print it out, works like a charm! I am not sure what are the proper names for…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
Brew Unit Motor Gear For Jura Impressa S95/S90
Print approx. €3.54–€4.33 excl. taxPreliminary estimate for one variant
Gyro rings, print test + 1 key ring Can also help you de-stress :) Allows you to test the distances between adjacent prints (print splice test) Spacing between rings: 0.05, 0.1, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.50, 0.60 and 0.70 mm.…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
Pas de support. Remplissage 100 %. 0.15 mm. Prusament PETG Clear.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Created for the Business Card Holder Flash Contest . This not only holds your business cards, but it encrypts and compresses them for safe, efficient, storage as well! If your business cards are ever seized by an attacker their personal…
I needed to run some flexible compressed air hose around the wall of my shop, so I made these wall-mounted hangers. They are good for hose up to 17mm diameter (and maybe a bit bigger). These are not designed to take a lot of stress or…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
turbo charger, the fan aka turbine is in a .obj file and the housing is in a .gcode file
Print approx. €9.35–€11.43 excl. taxPreliminary estimate for one variant
Rotated the outlet about 15° to clear the sixth mounting position for putting in screw from top. Also embedded M3 nuts into the lower (no support needed). Mounting with M3x12mm or longer. I uploaded a print file for Mk4S with three…
Print approx. €6.76–€8.27 excl. taxPreliminary estimate for PETGSource material: PET
replacement for compressor fan Scheppach HC24
Print approx. €4.83–€5.90 excl. taxPreliminary estimate for one variant
Spare part motor fan for air compressor ABAC Air Master Kit CE. Shaft diameter 14 mm. I printed on PRUSA XL with original ENCLOSURE: Filament: AURAPOL ASA 3D Filament Graphite Black 0,4 mm nozzle 0,20 mm layer 5 perimeters 15% infill…
Print approx. €4.80–€5.86 excl. taxPreliminary estimate for one variant
Build your own battery powered air horn out of an cordless screwdriver. Parts list: 2x printed half shells, PETG with supports is recomended 1x Einhell screwdriver TE-CD 12/1 Li 1x HP-Autozubehör 10930 3-Klang Kompressorfanfare 12 V 2x…
Print approx. €9.53–€11.65 excl. taxPreliminary estimate for PETGSource material: PET
A little doodad to help keep your air compressor flaps down. .bgcode file is set up for Prusa Mk4 with generic PETG and has brimming. Works great to pop two of 'em out! NOTE: Gear Guard does NOT lock with this inserted.
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
This air compressor muffler was designed for my commercial air compressors automatic dump valve. It turns the sound from startlingly loud to a reasonable hiss. Print in PETG at .2mm set 4-6 Perimeters. Set infill to Gyroid and about 10%…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for PETGSource material: PET
My compressor broke its oil-cap. The cap was just a threaded piece, with a hollow cylinder above, and a small hole all the way through the top to allow pass of air, as replicated here. I'd recommend printing standing upright, with threads…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
This 3D model captures the essence of the iconic Tupperware tumbler in a keychain-sized collectable. Designed to perfect scale, the model features the tumbler's signature details: Sleek, rounded body: The familiar silhouette of the…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Die Auffangschale nutze ich, zum Reinigen und/oder Entkalken, meiner Jura Impressa C60 Kaffee Maschine. Dies ist mein erster Entwurf, in Freecad. Die Datei stelle ich zur Verfügen, falls jemand noch Anpassungen, für seine Maschine, machen…
Print approx. €9.76–€11.92 excl. taxPreliminary estimate for PETGSource material: PET
My compressor broke its oil-cap. The cap was just a threaded piece, with a hollow cylinder above, and a small hole all the way through the top to allow pass of air, as replicated here. I'd recommend printing standing upright, with threads…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
I needed a divider for the smaller and the bigger part of the fridge, that goods do not fall down. Added cutouts for better ventilation. Printed with PLA at 0.25mm Layer height and 0.4 nozzle.
Print approx. €7.18–€8.78 excl. taxPreliminary estimate for PETGSource material: PET
The cover of the pressure switch of a friends compressor was broken. Dimensions: 82 x 52 x 51 mm, 2 mm thick
This is a precision-fit insert for the Inky Impression 7.3" (2025) e-ink display. The model was carefully designed to the millimeter to ensure all components match together nicely with a tight, secure fit. It is compatible with various…
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
This is a gridfinity-compatible cradle for the Xiaomi Aircompressor (only version 1 unfortunately), so you can store your compressor along with all your other gridfinitized bike tools. Dimensions: 5x2x2
Print approx. €4.74–€5.80 excl. taxPreliminary estimate for one variant
The ghost might enhance interest in brushing teeth by the younger Set. The tree support was reasonably easy to remove.
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
I needed a different type of feet for my Makita MAC700 air compressor to keep the original rubber feet from rooting and the screw & washer from scratching my wood floor. I fount that https://www.printables.com/@CymenVig_234754 “The…
Print approx. €15.01–€18.35 excl. taxPreliminary estimate for PETGSource material: PET
This is a single color print to replace the lever for the air dump valve on the bottom of a stealth compressor.
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Inlays made making a picture frame out of a Pimoroni Inky Impression 7.3" (2025 edition), an IKEA Rödalm 13x18 cm and a Raspberry Pi Zero 2W. This is what I used to make a small display that we had at the Codeberg stand at FOSDEM 2026 as…
Print approx. €1.12–€1.36 excl. taxPreliminary estimate for one variant
Criei esta placa para meus amigos BR's pois encontrava somente placas em inglês. Utilizei o Tinkecad e alguns ícones que encontrei na internet. Disponibilizei 2 modelos: Placa com impressora FDM (filamento) Placa com impressora SLA…
Print approx. €7.39–€9.03 excl. taxPreliminary estimate for one variant
These parts are screwed in a systainer plate and the compressor frame. It allows attaching systainers above the compressor. The top upper front metal bolts are replaced for the front connectors, while 4 ¾'' countersink screws hold the…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
This is a fan model I made for a neighbor's compressor for which the fan had broke.
Print approx. €10.46–€12.79 excl. taxPreliminary estimate for one variant
This model is a practical remix of a wall mount designed for the VanMoof S2 E-Bike charger. The wall mount has been extended with an additional holder for the Xiaomi Aircompressor, ensuring that you always have the essential tools for…
Print approx. €9.51–€11.63 excl. taxPreliminary estimate for one variant
Mount for the SKS-Rennkompressor. I use it in my campervan.
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
Quick print for an adjustment knob for Manitou Skareb Elite MTB Shocks (circa 2003). Mine broke after many years of service. If anyone else still uses these and also needs to replace the knob, this print may be of use. PETG is fine for my…
This is a storage case for the Radian Compressor Quick Tune Guide Rod. The case has room for the guide rod, springs, and washer. The model is parametric in case you'd like to try using it for another guide rod with different dimensions or…
Print approx. €5.18–€6.33 excl. taxPreliminary estimate for one variant
This simple to print holder is designed to accommodate the set of ImpressArt 3mm Alphabet stamps. This is 26 letters plus one “&” stamp. The holder is sized for 28 stamps in total which are physically 6.25mm square in the shaft and 3mm at…
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for one variant
A simple mount for the Husky brand air compressor filter HDA70403AV. Attach to the filter with an M4x8 bolt and then to your surface with whatever length M4 hardware you need. I printed mine with 4 perimeters, 50% infill, 0.25 structural…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
EN: To identify the control or the indicator for a vacuum pump or compressor (for example, status, or to identify the compressor or vacuum pump). DE: Um die Bedienstelle oder die Anzeige für eine Vakuumpumpe oder einen Kompressor zu…
As a means of opening Str8_3D's Ancient Egyptian Lock : Fill the bitting bed with clay. Press the key blank into place inside the lock. Remove the key blank from the lock. Note the locations of the pin holes in the clay impression. Insert…
Print approx. €3.64–€4.44 excl. taxPreliminary estimate for one variant
decidi modelar e imprimir uma peça de substituição em 3D. Funcionou perfeitamente e agora quero partilhar a solução com a comunidade!
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for PETGSource material: PET
Files for the compressed air engine used in the following project: FDM printed parts: Crank Case (Front, Rear) Crank Shaft Bottle Lid Engine Mount Piston Head Cap Resin printed parts: Cylinder Head Conrod Piston Seal Mold Other Required…
You don't have a compressor but want to remove dust, wood shavings or other light dirt from your workplace? No problem! With this attachment for your cordless screwdriver, it's done in no time at all! Is it hot and you need to cool down?…
🌸 Le printemps arrive ! 🌸 C'est l'occasion idéale pour appuyer nos apiculteurs locaux 🐝. Nous avons lancé une initiative pour imprimer des pièges à frelons asiatiques. Cette pièce est un piège imprimé en 3D pour les frelons asiatiques,…
This is amazing model was made by rndmframes_printing and the licensing allows sharing with attribution so I wanted to make sure the prusaprinters.org visitors didn't miss out on it by re-uploading! Original link here:…
Keep your pneumatic tools organized and always within reach! This wall-mounted holder is designed for air compressor tools such as impact wrenches, air ratchets, blow guns, tire inflators and die grinders. The holder keeps your workshop…
The original model was impressive. The author vandragon_de has made a version without holes for bathtube use, but it has some missing solid geometry at the propellers, so that it won't be properly sliced(with CURA). so I fixed the issue.…
Compression Spring. Spring Diameter 50 mm. Length 100 mm. Profile Diameter 8 mm. Category: Parts
Version en français : Découvrez ma collection de vis et écrous optimisés pour l'impression 3D, spécialement conçus pour vos projets du quotidien. De la taille M3 à M8, ces pièces respectent des normes rigoureuses d'optimisation pour…
Summary This is a 1:24 scale model of a workshop air compressor in a kit card style. Versions The complete set is available in a 3MF file for a one-color print. There is a 3MF-file with predefined colors intended for users of AMS or MMU.…
Yet another electric powered "turbo"... but this one sucks really hard! [>1.0 psi easily] I set about designing a centrifugal compressor with a smaller rotor/shroud clearance that commonly found, in order to achieve high pressures more…
Regenerative compressors provide good pressure head and medium flow at low RPMs. I designed this one from scratch in Sketchup to play with the concept for potential CPAP cooling on my printer. It starts to build pressure head at fairly…
A centrifugal compressor wheel (it's not called a turbine!) designed more for looks and pretty renderings than for actual use. Designed in CATIA. I uploaded the original model here: https://grabcad.com/library/centrifugal-compressor-4…
This model is based on my YouTube experiments with screw compressors. Checkout my YouTube video for more details, but I do not recommend using this as anything other than a desktop model. It is extremely dangerous and doesn't work very…
Water chute for Breville Barista Express / Express Impress espresso machines. This sits on top of the machine and allows easy access to fill the rear water tank. Works great if your machine is under a cabinet. VERY very new to 3D modeling…
I got the impeller from https://grabcad.com/library/turbo-compressor-impeller-2 The case was drawn in SolidWorks. This radial compressor is far from being optimized. The gap between the impeller and the case can be reduced. Furthermore,…
Version 4 added 8/13/25 but is untested. This is a simple valve spring compressor tool I designed for the M54/52 cylinder heads. I printed this in Overture PC on a Bambu Lab X1C in draft mode (0.28mm layer height) with 4 perimeters and…
SUP compressor adapter for high flow, low pressure valve. It should be printed with PETG and 4-6 perimeters. Best printed on the side with supports. It's a low pressure valve adapter.
This is a quick spring model I put together in tinkercad. I had success using 100% infill and tree supports, make the tree supports as thin as possible for easier removal(you can take pliers or anything and crush the tree supports from…
This is a working see through air compressor that can reach about 40psi. It is not completely 3D printed as you can imagine but the parts necessary are not that hard to find. Here is the video in which I describe how it works, the design…
When performing air spring maintenance on a Fox fork, Fox specifies part number 398-00-657 Tooling: Bullet, Sealhead To Shaft, FLOAT NA 2 This tool can be really tough to find, even when you work for a bike retailer. So... 3D printing to…
I've made these air compressor filter housings to replace the cheap original ones with one that flows more air and makes less noise.I've found out that the cheap ones have lots of flow obstructions and could be improved on significantly.…
Modified Zburns adapter to print without supports and with PTEG. I do not trust PLA for items like these that need to be more ridged. please use caution when Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports:…
I only made it for the models i have home if you have different sizes i will edit the model and add your size. Current size: D38 mm (20mm pipe) D43 mm (20 mm pipe)
Pretty straightforward. Three screws, strong, and support-free print. I needed a hanger for my compressed air hose that worked for the side of my shop cabinets, and this is what I came up with. It's low profile because I have limited…
HVAC compressor cut away model Print instructions Category: Models Summary HVAC compressor cut away model Print Settings Printer Brand: Prusa Printer: I3 MK3S </div> Rafts: No Supports: Yes </div> Resolution: 0.15 Infill: 15% </div>…
Découvrez ma collection de vis à tête creuse (BTR) et d'écrous optimisés pour l'impression 3D, spécialement conçus pour vos projets du quotidien. De la taille M3 à M8, ces pièces respectent les normes rigoureuses ISO. Chaque modèle a été…
## Design Concept The palm nunchucks are designed for stress relief and casual fidgeting. The compact size allows for easy handling and is suitable for quick routines while multitasking or relaxing. ## Uses This fidget toy is perfect for…
Notional model of a compressor blisk created using publicly available pictures. Diameter is just shy of 8". Two versions of the model are uploaded. One with the custom supports added for the blades and the other without. Normal supports…
This is a reimplementation of @mikiklopsiki's Inky Impression 7.3" frame case model on Thingiverse. It is written in OpenSCAD to allow customizability, but also implements a few changes from the original on its own: Significantly tweaked…
Diameter 10 mm. Length 50 mm. Profile Diameter 2 mm Diameter 15 mm. Length 75 mm. Profile Diameter 3 mm Diameter 20 mm. Length 90 mm. Profile Diameter 4 mm
I recently bought one of these small compressors to have a soft introduction to airbrushing, and drew up some mounts for them for IKEA Skadis. There are three parts: Cable Spool Small spool for the air hose. Prints without supports, and…
Conversion kit to transform a 120mm case fan (any with a hub in the neighborhood of 39-40mm diameter, which was all the spare ones I had floating around) into a centrifugal compressor with a double volute. 6.11.21 UPDATE: Finally, a smoke…
Ang. Balloon inflating adapter for a compressor. I designed it to inflate 300 balloons for my 18th birthday, and it worked perfectly. I recommend printing it with PETG instead of PLA because the thread might break off from the adapter.…
A complete cut open model and fully spinnable
This is a new design of the venturi nozzle V04. If you tested the older version too, please tell me which is best. With this print you can upgrade your normal compressed air gun to a gun with a venturi nozzle. This design is for a…
All parts print separate and fit into the allocated indentations/grooves. Print the handle, axles and foot stand with a brim .A drop of quick drying glue to hold them in place. Let me see your makes. :-)
A wall-mounting and desk-stand case for the Pimoroni Inky Impression 7-colour e-ink display and Raspberry Pi Zero Print instructions This is a wall-mounting and desk-stand case for the Pimoroni Inky Impression 7-colour e-ink display. I…
Fits ALL KTM, GASGAS, Husqvarna MX&ENDURO 2014-2022 models with 17mm high speed compression adjuster.
This is a turbo/compressor that I have been working on for a while now and it easily make 2-3 Psi with the motor that I use. This compressor is 42 mm for the opening. I printed it using only 10% infill and I only needed to put supports on…
Tête d'impression + guide drag-chain pour l'adventurer 5M. Marche bien avec la drag-chain PTFE de INQUE disponible sur le site à l'adresse ci-dessous :…
The goal was to create a filter for my compressor that could be quiet and that would allow me to use any type of filter medium. To print the ‘Body’, you need support, placing it with the smallest part on the print bed you will need less.…
Length 50mm, Diameter 25, Profile Diameter 4
Un petit print pour avoir de la lumière dans la tète d'impression ender3 V3 KE ! A prévoir : - 2 vis : 2x 25 -1 led : white !! 24 volts !! (Ali express : voir photo) - de la gaine thermo rétractable et de quoi souder ! Le tout à connecter…
BILL OF MATERIALS(might not be complete) 6x 26-30mm acrylic tube cut to 60 to 62mm (It is hard to cut but around61mm should work the best. M3 screws and nuts. 24x 80mm M3 threaded rods 6x 688 bearings 8x16x5 3x 608 bearings 8x22x7 6x 623…
A set of easy print tools to aid in the removal of SharkBite Compression Fittings (1/2", 3/4", 1"). Layer height 0.15mm Infill 15% Perimeters: 5 No Supports
Support pour MacBook Pro et ordinateur portable pour les imprimantes avec un petit plateau d’impression. Fait sur une Flashforge Créator Pro (232x154) Pas de vis, juste par emboitement MacBook Pro and laptop stand for printers with a…
This is a component of my hobby jet engine model. Model size is 99x99x52.5 mm. Printing took more than 4:30 hours:mins with Creality CR10-SE using default pla settings.
Accessory holder for compressor. It can be attached with a screw or nail or even a zip tie wherever you need to have compressor accessory at hand.
The cap can be printed in any material and without any supports, if it is flipped upside down. For the adapter use TPU. I used SainSmart TPU with 95A shore. I added a cable tie for extra security, but the friction should be strong enough…
Fun accessories for my regenerative compressor design! All fit a standard 22mm CPAP hose end. Only the venturi vacuum needs supports. Demonstration video:
Filtr na přívod vzduchu do kompresoru s výměnným molitanem z houbičky na nádobí. Průměr závitu do kompresoru 20mm se stoupáním 1.75mm Filter for air supply to the compressor with replaceable foam from the dish sponge. Compressor thread…
rises the cup by 35mm diameter of the zylinders at the bottem is 10,75mm distance between the zylinders at the bottom is 32mm You need 2x M4 countersunk bolts (DIN 7991) with a lenght between 12mm and 20mm. If it fits other…
2x2 Gridfinity block designed to hold a 10oz compressed air can and straw in any of the four corners. This block should also work for other spray paints, wd40, etc. Interested in Gridfinity?
Hi, this is a prototype of a vacuum robot gripper that creates its own vaccum using the venturi effect . It weighs around 6 g and can lift things up to 1.5 g (I just blew into the air intake) EDIT: @DickF tested it and was able to lift…
This rocket prints super easily and then slips perfectly over the long nozzle of the Einhell DG-10 air compressor pistol. One squeeze and off it goes, never to be found again! It is mad fast at 8 bar, but you can turn down your pressure…
fabrication d'une hélice suivant modèle de la pièce d'origine réaliser en PETG 1.75 blanc
Benötigt werden: 3x Wanddübel für 4er oder 4,5er Spax-Schrauben 3x Schrauben M5x10mm mit Flachkopf 3x Muttern M5 2x Kabelbinder klein Muttern M5 von hinten in die Wandplatte einsetzen Schraubenlöcher bohren und Wandplatte befestigen…
I made this fan bracket to attach a 120mm fan, that I took from an old PC case, to my Fendga airbrush air compressor. This will help to keep the air compressor cool when running; especially useful for compressors without a tank. I printed…
After putting together a slow movie player using an Inky Impression 7.3 screen it deserved a case! AWSW's case fit it almost perfectly, with slight changes needed to accommodate a slightly smaller and thicker display. Download the back…
Print this in gold, green/blue or pink to get RICH and annoy Mission control while you are at it! ROCK AND STONE!
