30 models
You need 4 90/92mm fans. Print the two parts and glue them together. The duct is mounted with 2 screws on each side. For the fans you need m3 screws. On the back are holes for zipties. Post a make :)
The parametric Autodesk Fusion file can be modified to fit your exact fan size. Excluding the air blocker plate, the model prints in four different pieces. STL files and hardware: Fit 80x80 mm and 120x120 mm fans. To mount the fans four…
A simple offset board for the ULN2003A (green) motor driver boards that are available on AliExpress. I connect the board with 4G x 6mm self-tapping screws and then super glue in place on models as needed.
ULN2003 Driver. Fichier .step avec le plan pour pouvoir l'ajouter à vos assemblages.
ULN2003 5V Stepper Motor place holder include fusion 360 file for insert part shortened wire just for visual
This is a two piece case , for honeycomb look just change your infill and remove top and bottom layers. 4 perimeters. I used tough PLA.
The HUAWEI SUN2000-10KTL-M1 is cooled only passive and therefore the temperature is very high. This was my solution to it. You can add a 140mm fan and turn it on time based or with some intelligent electronics. I recommend to active cool…
I was looking for a phone case for the N200 and this was the only good design, but it was for PLA and printed in two pieces. I wanted to print it in TPU so I connected both pieces into a single print and added some features. You can…
Cale de fixation pour PCB du module compatible Arduino : ULN2003 28BYJ-48 4 écrous carrés M3 DIN 562 5.5x1.8 4 x Vis CHC DIN 912 M3x10 2 x Barrette 2.54 : 4 contacts Fixing block for PCB of Arduino compatible module: ULN2003 28BYJ-48 4 x…
this is a mockup of the ULN2003 module Stepper driver for further 3D constructions.
Stand for Vaporesso Gen200 S for charging, cleaning etc. It simply falls too easy so i wanted it to have a good standing ;) Halterung für Vap. Gen 200 S um Verdampferdeck zu warten etc. Das Ding fällt einfach zu leicht um und darum wollte…
This is a sturdy holder for a 60mm fan to be used under an Huawei Sun2000L inverter. Two of those brackets can be placed under a single inverter, with a total of two fans. As heat rises, the fans do need to do little work to help what is…
New V3.1 Cradle Design for improved integration of Allsky Electronics, and fixation to main cone assembly. Includes additional fixation points for Driver boards and sensors for Allsky assemblies with additional features. See suggested…
Print with any settings on any filament - ironing makes it look a bit nicer. Press fit - you should be able to carry this around. Intended for any project requiring multiple 28BYJ-48 stepper motors and thus multiple driver boards…
(Original design from here: https://cults3d.com/:1323209) This is a re-work of the “Creality Ender 3/3Pro Part Cooling Fan Duct” by KingYS Significant effort was made to re-shape this and rework the mount to be compatible with the Mizar S…
Calmed inflow with integrated reduction from DN200 pipe connection to a diameter of 125mm. DE: beruhigter Zulauf für Regenwasserzisterne, DN200 mit integriertem Reduktionsstück auf 125 mm. ATTENTION! Doesn't make sense to reduce a 200 mm…
A backplate to hold up to 4 (2x2) uln2003 stepper motor drivers (for motor 28byj-48). A common +- paralel breadboard power line can also be inserted.
MoleBox system - 3D printed boxes compatible with BITBEAM construction kit (therefore even with LEGO Technics/Mindstorms). The main purpose of MoleBox is covering a particular sensor or the entire module and simultaneously allowing…
This is yet another template to easiliy set the toolrest in my most used angels: 25° 30° 45° 60° It doesnt need much material and still is stable on the toolrest. Designed for wheels with 200mm. There are two versions: optimized for 5mm /…
Print in PETG or ASA since there will be water contact all the time. For other sizes just scale it in your slicer or use my other model.
I took the base from https://www.thingiverse.com/thing:4167615 and added supports to hold the Arduino Uno and the ULN2003 motor controller board. The jumper wires do not touch the top plate! Print Settings Printer Brand: Prusa Printer: I3…
A quick design I made for my totolink N200. The mount has a great positive snap fit and allows you to mount it pretty much anywhere. For best results use 0.16 layer height, though words perfectly with 0.2 too. Enjoy, and Happy printing.
Designed this as a little project for myself, i didnt like the lubestations that were available so designed this to allow 10 switches per board (and 10 for the add on boards) also special spaces for a brush, small bottle of Krytox 204 oil…
Я не вмію моделювати, тому використав готову модель і підігнав під мій ANENG PN200
The few things you should now: I designed it to be used with the original nut from the Sdongle. ESP gets powered over the USB-A from Huawei inverter (5V 1A) For hardware you only need 4x M3 Screws ~10mm. There is no hardware mount in…
A backplate to hold up to 4 (2x2) uln2003 stepper motor drivers (for motor 28byj-48). A common +- paralel breadboard power line can also be inserted.
Locking nut M10x1.5 3mm widened for the FPV Gimbal by Bacon2002
